top.fit

来自「1．6个数码管动态扫描显示驱动 2．按键模式选择(时分秒)与调整控制 3．用」· FIT 代码 · 共 565 行 · 第 1/3 页

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 06/05/2008 20:50:17      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "top"
BEGIN

    DEVICE = "EP1K30QC208-3";

    "adjust"                       : INPUT_PIN  = 197    ;
    "clka"                         : INPUT_PIN  = 193    ;
    "clks"                         : INPUT_PIN  = 192    ;
    "clk1"                         : INPUT_PIN  = 191    ;
    "en"                           : INPUT_PIN  = 195    ;
    "mode"                         : INPUT_PIN  = 198    ;
    "reset"                        : INPUT_PIN  = 196    ;
    "aout"                         : OUTPUT_PIN = 38     ;
    "fout0"                        : OUTPUT_PIN = 86     ;
    "fout1"                        : OUTPUT_PIN = 87     ;
    "fout2"                        : OUTPUT_PIN = 88     ;
    "fout3"                        : OUTPUT_PIN = 89     ;
    "fout4"                        : OUTPUT_PIN = 90     ;
    "fout5"                        : OUTPUT_PIN = 92     ;
    "fout6"                        : OUTPUT_PIN = 93     ;
    "ss0"                          : OUTPUT_PIN = 71     ;
    "ss1"                          : OUTPUT_PIN = 73     ;
    "ss2"                          : OUTPUT_PIN = 74     ;
    "|cnt24:ahour|LPM_ADD_SUB:200|addcore:adder|:55" : LOCATION   = LC8_D29;
    "|cnt24:ahour|LPM_ADD_SUB:200|addcore:adder|:59" : LOCATION   = LC1_D29;
    "|cnt24:ahour|:11"             : LOCATION   = LC2_D15;  -- |cnt24:ahour|ah3
    "|cnt24:ahour|:12"             : LOCATION   = LC5_D15;  -- |cnt24:ahour|ah2
    "|cnt24:ahour|:13"             : LOCATION   = LC2_D35;  -- |cnt24:ahour|ah1
    "|cnt24:ahour|:14"             : LOCATION   = LC8_D35;  -- |cnt24:ahour|ah0
    "|cnt24:ahour|:15"             : LOCATION   = LC3_D29;  -- |cnt24:ahour|al3
    "|cnt24:ahour|:16"             : LOCATION   = LC6_D29;  -- |cnt24:ahour|al2
    "|cnt24:ahour|:17"             : LOCATION   = LC7_D29;  -- |cnt24:ahour|al1
    "|cnt24:ahour|:18"             : LOCATION   = LC5_D29;  -- |cnt24:ahour|al0
    "|cnt24:ahour|:101"            : LOCATION   = LC7_D35;
    "|cnt24:ahour|~120~1"          : LOCATION   = LC2_D29;
    "|cnt24:ahour|~120~2"          : LOCATION   = LC1_D15;
    "|cnt24:ahour|~120~3"          : LOCATION   = LC3_D35;
    "|cnt24:ahour|:139"            : LOCATION   = LC5_D35;
    "|cnt24:ahour|~139~1"          : LOCATION   = LC4_D35;
    "|cnt24:ahour|:251"            : LOCATION   = LC6_D35;
    "|cnt24:ahour|~359~1"          : LOCATION   = LC1_D35;
    "|cnt24:hourc|LPM_ADD_SUB:200|addcore:adder|:55" : LOCATION   = LC6_D6 ;
    "|cnt24:hourc|LPM_ADD_SUB:200|addcore:adder|:59" : LOCATION   = LC7_D6 ;
    "|cnt24:hourc|:11"             : LOCATION   = LC8_D3 ;  -- |cnt24:hourc|ah3
    "|cnt24:hourc|:12"             : LOCATION   = LC1_D3 ;  -- |cnt24:hourc|ah2
    "|cnt24:hourc|:13"             : LOCATION   = LC1_D9 ;  -- |cnt24:hourc|ah1
    "|cnt24:hourc|:14"             : LOCATION   = LC3_D9 ;  -- |cnt24:hourc|ah0
    "|cnt24:hourc|:15"             : LOCATION   = LC1_D6 ;  -- |cnt24:hourc|al3
    "|cnt24:hourc|:16"             : LOCATION   = LC2_D6 ;  -- |cnt24:hourc|al2
    "|cnt24:hourc|:17"             : LOCATION   = LC4_D6 ;  -- |cnt24:hourc|al1
    "|cnt24:hourc|:18"             : LOCATION   = LC3_D6 ;  -- |cnt24:hourc|al0
    "|cnt24:hourc|:101"            : LOCATION   = LC8_D9 ;
    "|cnt24:hourc|~120~1"          : LOCATION   = LC2_D7 ;
    "|cnt24:hourc|~120~2"          : LOCATION   = LC2_D3 ;
    "|cnt24:hourc|~120~3"          : LOCATION   = LC4_D7 ;
    "|cnt24:hourc|:139"            : LOCATION   = LC6_D9 ;
    "|cnt24:hourc|~139~1"          : LOCATION   = LC5_D9 ;
    "|cnt24:hourc|:251"            : LOCATION   = LC7_D9 ;
    "|cnt24:hourc|~359~1"          : LOCATION   = LC2_D9 ;
    "|cout60:amin|LPM_ADD_SUB:160|addcore:adder|:55" : LOCATION   = LC4_D1 ;
    "|cout60:amin|:21"             : LOCATION   = LC7_D1 ;  -- |cout60:amin|al3
    "|cout60:amin|:22"             : LOCATION   = LC6_D1 ;  -- |cout60:amin|al2
    "|cout60:amin|:23"             : LOCATION   = LC8_D1 ;  -- |cout60:amin|al1
    "|cout60:amin|:24"             : LOCATION   = LC1_D16;  -- |cout60:amin|al0
    "|cout60:amin|:25"             : LOCATION   = LC2_D16;  -- |cout60:amin|ah3
    "|cout60:amin|:26"             : LOCATION   = LC4_D2 ;  -- |cout60:amin|ah2
    "|cout60:amin|:27"             : LOCATION   = LC5_D2 ;  -- |cout60:amin|ah1
    "|cout60:amin|:28"             : LOCATION   = LC8_D2 ;  -- |cout60:amin|ah0
    "|cout60:amin|:188"            : LOCATION   = LC1_D1 ;
    "|cout60:amin|~188~1"          : LOCATION   = LC2_D1 ;
    "|cout60:amin|:191"            : LOCATION   = LC5_D1 ;
    "|cout60:amin|~228~1"          : LOCATION   = LC3_D2 ;
    "|cout60:amin|:298"            : LOCATION   = LC6_D2 ;
    "|cout60:amin|~298~1"          : LOCATION   = LC1_D2 ;
    "|cout60:amin|:359"            : LOCATION   = LC7_D2 ;
    "|cout60:amin|~423~1"          : LOCATION   = LC2_D2 ;
    "|cout60:amin|~423~2"          : LOCATION   = LC3_D1 ;
    "|cout60:minc|LPM_ADD_SUB:160|addcore:adder|:55" : LOCATION   = LC5_D17;
    "|cout60:minc|:11"             : LOCATION   = LC5_D13;
    "|cout60:minc|:21"             : LOCATION   = LC1_D13;  -- |cout60:minc|al3
    "|cout60:minc|:22"             : LOCATION   = LC2_D13;  -- |cout60:minc|al2
    "|cout60:minc|:23"             : LOCATION   = LC2_D17;  -- |cout60:minc|al1
    "|cout60:minc|:24"             : LOCATION   = LC1_D17;  -- |cout60:minc|al0
    "|cout60:minc|:25"             : LOCATION   = LC1_D14;  -- |cout60:minc|ah3
    "|cout60:minc|:26"             : LOCATION   = LC2_D12;  -- |cout60:minc|ah2
    "|cout60:minc|:27"             : LOCATION   = LC8_D12;  -- |cout60:minc|ah1
    "|cout60:minc|:28"             : LOCATION   = LC5_D12;  -- |cout60:minc|ah0
    "|cout60:minc|:188"            : LOCATION   = LC1_D12;
    "|cout60:minc|~188~1"          : LOCATION   = LC8_D14;
    "|cout60:minc|:191"            : LOCATION   = LC8_D13;
    "|cout60:minc|~228~1"          : LOCATION   = LC3_D12;
    "|cout60:minc|:298"            : LOCATION   = LC6_D12;
    "|cout60:minc|~298~1"          : LOCATION   = LC3_D5 ;
    "|cout60:minc|:359"            : LOCATION   = LC7_D12;
    "|cout60:minc|~423~1"          : LOCATION   = LC7_D13;
    "|cout60:minc|~429~1"          : LOCATION   = LC4_D12;
    "|cout60:secc|LPM_ADD_SUB:160|addcore:adder|:55" : LOCATION   = LC7_D4 ;
    "|cout60:secc|:11"             : LOCATION   = LC6_D13;
    "|cout60:secc|:21"             : LOCATION   = LC4_D4 ;  -- |cout60:secc|al3
    "|cout60:secc|:22"             : LOCATION   = LC3_D4 ;  -- |cout60:secc|al2
    "|cout60:secc|:23"             : LOCATION   = LC5_D4 ;  -- |cout60:secc|al1
    "|cout60:secc|:24"             : LOCATION   = LC4_D18;  -- |cout60:secc|al0
    "|cout60:secc|:25"             : LOCATION   = LC2_D11;  -- |cout60:secc|ah3
    "|cout60:secc|:26"             : LOCATION   = LC5_D8 ;  -- |cout60:secc|ah2
    "|cout60:secc|:27"             : LOCATION   = LC4_D8 ;  -- |cout60:secc|ah1
    "|cout60:secc|:28"             : LOCATION   = LC3_D8 ;  -- |cout60:secc|ah0
    "|cout60:secc|:188"            : LOCATION   = LC1_D4 ;
    "|cout60:secc|:191"            : LOCATION   = LC8_D4 ;
    "|cout60:secc|~228~1"          : LOCATION   = LC2_D4 ;
    "|cout60:secc|~228~2"          : LOCATION   = LC6_D8 ;
    "|cout60:secc|~228~3"          : LOCATION   = LC2_D8 ;
    "|cout60:secc|:298"            : LOCATION   = LC7_D8 ;
    "|cout60:secc|~298~1"          : LOCATION   = LC2_D18;
    "|cout60:secc|:359"            : LOCATION   = LC8_D8 ;
    "|cout60:secc|~423~1"          : LOCATION   = LC6_D4 ;
    "|cout60:secc|~429~1"          : LOCATION   = LC1_D8 ;
    "|mode_adjust:control|:16"     : LOCATION   = LC1_D33;  -- |mode_adjust:control|c_state2
    "|mode_adjust:control|:17"     : LOCATION   = LC8_D33;  -- |mode_adjust:control|c_state1
    "|mode_adjust:control|:18"     : LOCATION   = LC2_D30;  -- |mode_adjust:control|c_state0
    "|mode_adjust:control|:325"    : LOCATION   = LC5_D30;
    "|mode_adjust:control|:328"    : LOCATION   = LC3_D30;
    "|mode_adjust:control|:335"    : LOCATION   = LC6_D30;
    "|mode_adjust:control|:345"    : LOCATION   = LC7_D30;
    "|mode_adjust:control|:355"    : LOCATION   = LC1_D30;
    "|mode_adjust:control|:409"    : LOCATION   = LC1_D34;
    "|mode_adjust:control|:412"    : LOCATION   = LC5_D34;
    "|mode_adjust:control|:424"    : LOCATION   = LC7_D33;
    "|mode_adjust:control|:430"    : LOCATION   = LC3_D33;
    "|mode_adjust:control|:440"    : LOCATION   = LC2_D33;
    "|mode_adjust:control|:441"    : LOCATION   = LC8_D34;
    "|mode_adjust:control|:448"    : LOCATION   = LC5_D33;
    "|mode_adjust:control|:449"    : LOCATION   = LC3_D34;
    "|mode_adjust:control|:522"    : LOCATION   = LC8_D30;
    "|mode_adjust:control|:540"    : LOCATION   = LC6_D33;
    "|mode_adjust:control|~540~1"  : LOCATION   = LC4_D33;
    "|muxcmp:muxcomp|:147"         : LOCATION   = LC3_D20;
    "|muxcmp:muxcomp|:161"         : LOCATION   = LC6_D19;
    "|muxcmp:muxcomp|:175"         : LOCATION   = LC7_D19;
    "|muxcmp:muxcomp|:182"         : LOCATION   = LC4_D19;
    "|muxcmp:muxcomp|:291"         : LOCATION   = LC3_D11;
    "|muxcmp:muxcomp|:297"         : LOCATION   = LC4_D11;
    "|muxcmp:muxcomp|:303"         : LOCATION   = LC5_D11;
    "|muxcmp:muxcomp|:309"         : LOCATION   = LC6_D11;
    "|muxcmp:muxcomp|:315"         : LOCATION   = LC7_D11;
    "|muxcmp:muxcomp|:321"         : LOCATION   = LC8_D11;
    "|muxcmp:muxcomp|:327"         : LOCATION   = LC2_D10;
    "|muxcmp:muxcomp|:330"         : LOCATION   = LC3_D10;
    "|muxcmp:muxcomp|:333"         : LOCATION   = LC5_D10;
    "|muxcmp:muxcomp|:336"         : LOCATION   = LC1_D10;
    "|muxcmp:muxcomp|:339"         : LOCATION   = LC3_D3 ;
    "|muxcmp:muxcomp|:342"         : LOCATION   = LC4_D3 ;
    "|muxcmp:muxcomp|:348"         : LOCATION   = LC4_D17;
    "|muxcmp:muxcomp|:351"         : LOCATION   = LC6_D17;
    "|muxcmp:muxcomp|:354"         : LOCATION   = LC7_D17;
    "|muxcmp:muxcomp|:357"         : LOCATION   = LC8_D17;
    "|muxcmp:muxcomp|:360"         : LOCATION   = LC3_D17;
    "|muxcmp:muxcomp|:363"         : LOCATION   = LC3_D7 ;
    "|muxcmp:muxcomp|:369"         : LOCATION   = LC1_D18;
    "|muxcmp:muxcomp|:372"         : LOCATION   = LC3_D18;
    "|muxcmp:muxcomp|:375"         : LOCATION   = LC6_D18;
    "|muxcmp:muxcomp|:378"         : LOCATION   = LC7_D18;
    "|muxcmp:muxcomp|:381"         : LOCATION   = LC8_D18;
    "|muxcmp:muxcomp|:384"         : LOCATION   = LC5_D18;
    "|muxcmp:muxcomp|:425"         : LOCATION   = LC7_D20;
    "|muxcmp:muxcomp|:439"         : LOCATION   = LC3_D19;