prev_cmp_vga.fit.qmsg

VGA显示的例子（VHDL语言）

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 7.2 Build 175 11/20/2007 Service Pack 1 SJ Full Version " "Info: Version 7.2 Build 175 11/20/2007 Service Pack 1 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0 "" 0} { "Info" "IQEXE_START_BANNER_TIME" "Thu Jun 12 19:40:38 2008 " "Info: Processing started: Thu Jun 12 19:40:38 2008" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off VGA -c VGA " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off VGA -c VGA" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "VGA EP2C8Q208C8 " "Info: Selected device EP2C8Q208C8 for design \"VGA\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0}
{ "Warning" "WCUT_CUT_DEFAULT_OPERATING_CONDITION" "high junction temperature 85 " "Warning: The high junction temperature operating condition is not set. Assuming a default value of '85'." {  } {  } 0 0 "The %1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "" 0}
{ "Warning" "WCUT_CUT_DEFAULT_OPERATING_CONDITION" "low junction temperature 0 " "Warning: The low junction temperature operating condition is not set. Assuming a default value of '0'." {  } {  } 0 0 "The %1!s! operating condition is not set. Assuming a default value of '%2!s!'." 0 0 "" 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208C8 " "Info: Device EP2C5Q208C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5Q208I8 " "Info: Device EP2C5Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8Q208I8 " "Info: Device EP2C8Q208I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "2 " "Info: Fitter converted 2 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ 1 " "Info: Pin ~ASDO~ is reserved at location 1" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ 2 " "Info: Pin ~nCSO~ is reserved at location 2" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0}
{ "Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "7 7 " "Warning: No exact pin location assignment(s) for 7 pins of 7 total pins" { { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "r " "Info: Pin r not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { r } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 160 464 640 176 "r" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { r } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { r } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "g " "Info: Pin g not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { g } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 176 464 640 192 "g" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { g } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { g } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "b " "Info: Pin b not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { b } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 192 472 648 208 "b" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "HS " "Info: Pin HS not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { HS } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 128 480 656 144 "HS" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { HS } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { HS } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "VS " "Info: Pin VS not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { VS } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 144 480 656 160 "VS" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VS } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VS } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "reset " "Info: Pin reset not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { reset } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 144 -48 120 160 "reset" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0} { "Info" "IFIOMGR_PIN_MISSING_LOCATION_INFO" "clk " "Info: Pin clk not assigned to an exact location on the device" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { clk } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 128 -48 120 144 "clk" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Pin %1!s! not assigned to an exact location on the device" 0 0 "" 0}  } {  } 0 0 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "clk (placed in PIN 23 (CLK0, LVDSCLK0p, Input)) " "Info: Automatically promoted node clk (placed in PIN 23 (CLK0, LVDSCLK0p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "VGAsingl:inst\|FS\[5\] " "Info: Destination node VGAsingl:inst\|FS\[5\]" {  } { { "VGAsingl.vhd" "" { Text "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGAsingl.vhd" 10 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|FS[5] } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|FS[5] } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "" 0}  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { clk } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 128 -48 120 144 "clk" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { clk } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "reset (placed in PIN 24 (CLK1, LVDSCLK0n, Input)) " "Info: Automatically promoted node reset (placed in PIN 24 (CLK1, LVDSCLK0n, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G1 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G1" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "VGAsingl:inst\|R~546 " "Info: Destination node VGAsingl:inst\|R~546" {  } { { "VGAsingl.vhd" "" { Text "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGAsingl.vhd" 5 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|R~546 } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|R~546 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "VGAsingl:inst\|G~171 " "Info: Destination node VGAsingl:inst\|G~171" {  } { { "VGAsingl.vhd" "" { Text "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGAsingl.vhd" 5 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|G~171 } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|G~171 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "VGAsingl:inst\|B~1382 " "Info: Destination node VGAsingl:inst\|B~1382" {  } { { "VGAsingl.vhd" "" { Text "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGAsingl.vhd" 5 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|B~1382 } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { VGAsingl:inst|B~1382 } "NODE_NAME" } }  } 0 0 "Destination node %1!s!" 0 0 "" 0}  } {  } 0 0 "Following destination nodes may be non-global or may not use global or regional clocks" 0 0 "" 0}  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { reset } } } { "VGA.bdf" "" { Schematic "F:/DEMO_FPGA/EP2C8-V5/VHDLProgram/VGA/VGA.bdf" { { 144 -48 120 160 "reset" "" } } } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { reset } "NODE_NAME" } }  } 0 0 "Automatically promoted node %1!s! %2!s!" 0 0 "" 0}