usb.fit.qmsg

这是一个在MAX II CPLD利用FT245BM 模块实现USB传输的读写程序

{ "Extra Info" "IFSAC_FSAC_FINISH_LUT_PACKING" "00:00:00 " "Extra Info: Finished moving registers into LUTs: elapsed time is 00:00:00" {  } {  } 1 0 "Finished moving registers into LUTs: elapsed time is %1!s!" 1 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "4.753 ns register pin " "Info: Estimated most critical path is register to pin delay of 4.753 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns USB_T:inst2\|Data2USB\[6\] 1 REG LAB_X3_Y7 5 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X3_Y7; Fanout = 5; REG Node = 'USB_T:inst2\|Data2USB\[6\]'" {  } { { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_T:inst2|Data2USB[6] } "NODE_NAME" } } { "USB_T.v" "" { Text "F:/ylc627/MY_USB/USB_T.v" 38 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(2.431 ns) + CELL(2.322 ns) 4.753 ns USB_data\[2\] 2 PIN PIN_134 0 " "Info: 2: + IC(2.431 ns) + CELL(2.322 ns) = 4.753 ns; Loc. = PIN_134; Fanout = 0; PIN Node = 'USB_data\[2\]'" {  } { { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "4.753 ns" { USB_T:inst2|Data2USB[6] USB_data[2] } "NODE_NAME" } } { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.322 ns ( 48.85 % ) " "Info: Total cell delay = 2.322 ns ( 48.85 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "2.431 ns ( 51.15 % ) " "Info: Total interconnect delay = 2.431 ns ( 51.15 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "4.753 ns" { USB_T:inst2|Data2USB[6] USB_data[2] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X0_Y0 X8_Y11 " "Info: The peak interconnect region extends from location X0_Y0 to location X8_Y11" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "USB_WU VCC " "Info: Pin USB_WU has VCC driving its datain port" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 160 776 952 176 "USB_WU" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_WU" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_WU } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_WU } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0}
{ "Info" "IFIOMGR_ALL_OUTPUT_ENABLE_GROUPS" "" "Info: Following groups of pins have the same output enable" { { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP" "USB_T:inst2\|TriEnableDout " "Info: Following pins have the same output enable: USB_T:inst2\|TriEnableDout" { { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[7\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[7\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[7\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[7] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[7] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[5\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[5\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[5\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[5] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[5] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[3\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[3\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[3\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[3] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[3] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[1\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[1\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[1\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[1] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[1] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[6\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[6\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[6\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[6] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[6] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[4\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[4\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[4\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[4] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[4] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[2\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[2\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[2\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[2] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[2] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0} { "Info" "IFIOMGR_SAME_OUTPUT_ENABLE_GROUP_SUB" "bidirectional USB_data\[0\] 3.3-V LVTTL " "Info: Type bidirectional pin USB_data\[0\] uses the 3.3-V LVTTL I/O standard" {  } { { "usb.bdf" "" { Schematic "F:/ylc627/MY_USB/usb.bdf" { { 280 -64 112 296 "USB_data\[7..0\]" "" } } } } { "d:/altera/70/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/70/quartus/bin/Assignment Editor.qase" 1 { { 0 "USB_data\[0\]" } } } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[0] } "NODE_NAME" } } { "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/70/quartus/bin/TimingClosureFloorplan.fld" "" "" { USB_data[0] } "NODE_NAME" } }  } 0 0 "Type %1!s! pin %2!s! uses the %3!s! I/O standard" 0 0}  } {  } 0 0 "Following pins have the same output enable: %1!s!" 0 0}  } {  } 0 0 "Following groups of pins have the same output enable" 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 2 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 2 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "157 " "Info: Allocated 157 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Tue Jun 10 15:07:00 2008 " "Info: Processing ended: Tue Jun 10 15:07:00 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "F:/ylc627/MY_USB/usb.fit.smsg " "Info: Generated suppressed messages file F:/ylc627/MY_USB/usb.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}