📄 zonghejishu.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.0 9/14/2000
-- Compiled: 10/20/2007 12:31:36
-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "zonghejishu"
BEGIN
DEVICE = "EPF10K20TI144-4";
"bego" : INPUT_PIN = 86 ;
"clear" : INPUT_PIN = 79 ;
"cp" : INPUT_PIN = 122 ;
"left" : INPUT_PIN = 78 ;
"over" : INPUT_PIN = 95 ;
"right" : INPUT_PIN = 83 ;
"a" : OUTPUT_PIN = 27 ;
"b" : OUTPUT_PIN = 28 ;
"c" : OUTPUT_PIN = 29 ;
"d" : OUTPUT_PIN = 30 ;
"|dchufa:i1|:3" : LOCATION = LC4_E13;
"|jishu16:g1|LPM_ADD_SUB:58|addcore:adder|:59" : LOCATION = LC1_E21;
"|jishu16:g1|LPM_ADD_SUB:79|addcore:adder|pcarry2" : LOCATION = LC4_E21;
"|jishu16:g1|:8" : LOCATION = LC2_E21; -- |jishu16:g1|temp3
"|jishu16:g1|:9" : LOCATION = LC8_E21; -- |jishu16:g1|temp2
"|jishu16:g1|:10" : LOCATION = LC5_E21; -- |jishu16:g1|temp1
"|jishu16:g1|:11" : LOCATION = LC3_E21; -- |jishu16:g1|temp0
"|jkslect:u1|:5" : LOCATION = LC1_E13; -- |jkslect:u1|jout
":58" : LOCATION = LC5_E13;
"~72~1" : LOCATION = LC3_E13;
":73" : LOCATION = LC2_E13;
END;
INTERNAL_INFO "zonghejishu"
BEGIN
DEVICE = EPF10K20TI144-4;
OH10R4P86 : LORAX = "1:G41R4,PA18R4C12->LC4_E13,->LC5_E13,->LC3_E13|";
OH11R5P79 : LORAX = "1:G42R5,V4C15,HHR12R4,PA3R4C20->LC2_E21,->LC8_E21,->LC5_E21,->LC3_E21|";
OV1C12P122 : LORAX = "1:V8C12,HHR3R4,PA19R4C12->LC4_E13,->LC1_E13|";
LC2_E21 : LORAX = "1:MSW1R4C21,V3C21,HHR12R5->OH1R5P30|";
LC8_E21 : LORAX = "1:MSW7R4C21,HHR27R4->OH7R4P29|";
LC5_E21 : LORAX = "1:MSW4R4C20,HHR43R4->OH4R4P28|";
LC3_E21 : LORAX = "1:MSW2R4C20,HHR1R4->OH2R4P27|";
LC1_E13 : LORAX = "1:MSW0R4C12,HHR22R4,PA2R4C20->LC2_E21,->LC8_E21,->LC5_E21|";
OH14R5P78 : LORAX = "1:G44R5,V10C13,G9R4,PA12R4C12->LC4_E13,->LC1_E13,->LC5_E13|";
OH14R1P95 : LORAX = "1:G44R1,V11C13,HHR13R4,PA2R4C12->LC4_E13,->LC5_E13,->LC3_E13|";
OH13R4P83 : LORAX = "1:G14R4,PA20R4C12->LC4_E13,->LC1_E13,->LC5_E13|";
LC2_E13 : LORAX = "1:MSW1R4C13,HHR11R4,PA21R4C20->LC2_E21,->LC8_E21,->LC5_E21,->LC3_E21|";
LC4_E13 : LORAX2 = "OH10R4P86, OH14R1P95, OH14R5P78, OH13R4P83";
LC1_E21 : LORAX2 = "X, LC5_E21, LC8_E21, LC3_E21";
LC4_E21 : LORAX2 = "X, LC5_E21, LC8_E21, LC3_E21";
LC2_E21 : LORAX2 = "LC1_E13, LC4_E21, LC1_E21, LC2_E21";
LC8_E21 : LORAX2 = "LC1_E13, LC5_E21, LC8_E21, LC3_E21";
LC5_E21 : LORAX2 = "X, LC1_E13, LC5_E21, LC3_E21";
LC3_E21 : LORAX2 = "X, X, X, LC3_E21";
LC1_E13 : LORAX2 = "LC1_E13, LC3_E13, OH14R5P78, OH13R4P83";
LC5_E13 : LORAX2 = "OH10R4P86, OH14R1P95, OH14R5P78, OH13R4P83";
LC3_E13 : LORAX2 = "X, X, OH14R1P95, OH10R4P86";
LC2_E13 : LORAX2 = "X, X, LC4_E13, LC5_E13";
END;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -