📄 pwm_ct_defines.v
字号:
////////////////////////////////////////////////////////////////////////// //////// WISHBONE PWM/Timer/Counter Definitions //////// //////// This file is part of the PTC project //////// http://www.opencores.org/cores/ptc/ //////// //////// Description //////// PTC definitions. //////// //////// To Do: //////// Nothing //////// //////// Author(s): //////// - Damjan Lampret, lampret@opencores.org //////// ////////////////////////////////////////////////////////////////////////////// //////// Copyright (C) 2000 Authors and OPENCORES.ORG //////// //////// This source file may be used and distributed without //////// restriction provided that this copyright statement is not //////// removed from the file and that any derivative work contains //////// the original copyright notice and the associated disclaimer. //////// //////// This source file is free software; you can redistribute it //////// and/or modify it under the terms of the GNU Lesser General //////// Public License as published by the Free Software Foundation; //////// either version 2.1 of the License, or (at your option) any //////// later version. //////// //////// This source is distributed in the hope that it will be //////// useful, but WITHOUT ANY WARRANTY; without even the implied //////// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR //////// PURPOSE. See the GNU Lesser General Public License for more //////// details. //////// //////// You should have received a copy of the GNU Lesser General //////// Public License along with this source; if not, download it //////// from http://www.opencores.org/lgpl.shtml //////// ////////////////////////////////////////////////////////////////////////////// CVS Revision History//// $Log: ptc_defines.v,v $// Revision 1.1 2001/09/18 18:48:29 lampret// Changed top level ptc into ptc_top. Changed defines.v into ptc_defines.v. Reset of the counter is now synchronous.//// Revision 1.2 2001/08/21 23:23:50 lampret// Changed directory structure, defines and port names.//// Revision 1.2 2001/07/17 00:18:08 lampret// Added new parameters however RTL still has some issues related to hrc_match and int_match//// Revision 1.1 2001/06/05 07:45:36 lampret// Added initial RTL and test benches. There are still some issues with these files.//////// Width of the PTC counter////`define PTC_CW 32//// Undefine this one if you don't want to remove PTC block from your design// but you also don't need it. When it is undefined, all PTC ports still// remain valid and the core can be synthesized however internally there is// no PTC funationality.//// Defined by default (duhh !).//`define PTC_IMPLEMENTED//// Undefine if you don't need to read PTC registers.// When it is undefined all reads of PTC registers return zero. This// is usually useful if you want really small area (for example when// implemented in FPGA).//// To follow PTC IP core specification document this one must be defined.// Also to successfully run the test bench it must be defined. By default// it is defined.//`define PTC_READREGS//// Full WISHBONE address decoding//// It is is undefined, partial WISHBONE address decoding is performed.// Undefine it if you need to save some area.//// By default it is defined.//`define PTC_FULL_DECODE//// Strict 32-bit WISHBONE access//// If this one is defined, all WISHBONE accesses must be 32-bit. If it is// not defined, err_o is asserted whenever 8- or 16-bit access is made.// Undefine it if you need to save some area.//// By default it is defined.//`define PTC_STRICT_32BIT_ACCESS//// WISHBONE address bits used for full decoding of PTC registers.//`define PTC_ADDRHH 15`define PTC_ADDRHL 5`define PTC_ADDRLH 1`define PTC_ADDRLL 0//// Bits of WISHBONE address used for partial decoding of PTC registers.//// Default 4:2.//`define PTC_OFS_BITS `PTC_ADDRHL-1:`PTC_ADDRLH+1//// Addresses of PTC registers//// To comply with PTC IP core specification document they must go from// address 0 to address 0xC in the following order: RPTC_CNTR, RPTC_HRC,// RPTC_LRC and RPTC_CTRL//// If particular alarm/ctrl register is not needed, it's address definition// can be omitted and the register will not be implemented. Instead a fixed// default value will// be used.//`define PTC_RPTC_CNTR 2'h0 // Address 0x0`define PTC_RPTC_HRC 2'h1 // Address 0x4`define PTC_RPTC_LRC 2'h2 // Address 0x8`define PTC_RPTC_CTRL 2'h3 // Address 0xc//// Default values for unimplemented PTC registers//`define PTC_DEF_RPTC_CNTR `PTC_CW'b0`define PTC_DEF_RPTC_HRC `PTC_CW'b0`define PTC_DEF_RPTC_LRC `PTC_CW'b0`define PTC_DEF_RPTC_CTRL 9'h01 // RPTC_CTRL[EN] = 1//// RPTC_CTRL bits//// To comply with the PTC IP core specification document they must go from// bit 0 to bit 8 in the following order: EN, ECLK, NEC, OE, SINGLE, INTE,// INT, CNTRRST, CAPTE//`define PTC_RPTC_CTRL_EN 0`define PTC_RPTC_CTRL_ECLK 1`define PTC_RPTC_CTRL_NEC 2`define PTC_RPTC_CTRL_OE 3`define PTC_RPTC_CTRL_SINGLE 4`define PTC_RPTC_CTRL_INTE 5`define PTC_RPTC_CTRL_INT 6`define PTC_RPTC_CTRL_CNTRRST 7`define PTC_RPTC_CTRL_CAPTE 8
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -