madcat100.fit

关于交通灯的汇编程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 04/04/2007 13:22:14      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "madcat100"
BEGIN

    DEVICE = "EPM7032VLC44-12";

    "add"                          : INPUT_PIN  = 4      ; -- LC1
    "clear"                        : INPUT_PIN  = 1      ;
    "clk"                          : INPUT_PIN  = 43     ;
    "sub"                          : INPUT_PIN  = 5      ; -- LC2
    "out0"                         : OUTPUT_PIN = 41     ; -- LC17
    "out1"                         : OUTPUT_PIN = 9      ; -- LC6
    "out2"                         : OUTPUT_PIN = 40     ; -- LC18
    "out3"                         : OUTPUT_PIN = 39     ; -- LC19
    "out4"                         : OUTPUT_PIN = 38     ; -- LC20
    "out5"                         : OUTPUT_PIN = 7      ; -- LC4
    "out6"                         : OUTPUT_PIN = 8      ; -- LC5
    "out7"                         : OUTPUT_PIN = 37     ; -- LC21
    "|lpm_add_sub:245|addcore:adder|result_node3" : LOCATION   = LC31   ; -- PIN 25
    "|lpm_add_sub:245|addcore:adder|result_node4" : LOCATION   = LC29   ; -- PIN 27
    "|lpm_add_sub:245|addcore:adder|result_node5" : LOCATION   = LC27   ; -- PIN 29
    "|lpm_add_sub:245|addcore:adder|result_node6" : LOCATION   = LC26   ; -- PIN 31
    "|lpm_add_sub:245|addcore:adder|result_node7" : LOCATION   = LC24   ; -- PIN 33
    "|lpm_add_sub:246|addcore:adder|result_node3" : LOCATION   = LC25   ; -- PIN 32
    "|lpm_add_sub:246|addcore:adder|result_node4" : LOCATION   = LC28   ; -- PIN 28
    "|lpm_add_sub:246|addcore:adder|result_node5" : LOCATION   = LC30   ; -- PIN 26
    "|lpm_add_sub:246|addcore:adder|result_node6" : LOCATION   = LC32   ; -- PIN 24
    "|lpm_add_sub:246|addcore:adder|result_node7" : LOCATION   = LC23   ; -- PIN 34
    "~222~1"                       : LOCATION   = LC22   ; -- PIN 36
    "~226~1"                       : LOCATION   = LC8    ; -- PIN 12
    "~227~1"                       : LOCATION   = LC7    ; -- PIN 11

END;

INTERNAL_INFO "madcat100"
BEGIN
	DEVICE = EPM7032VLC44-12;
	LC21    : LORAX = "G30R0,PA16R0C0,PA17R0C1";
	LC5     : LORAX = "G26R0,PA11R0C0,PA11R0C1";
	LC4     : LORAX = "G12R0,PA0R0C0,PA0R0C1";
	LC20    : LORAX = "G16R0,PA1R0C1,PA1R0C0";
	LC19    : LORAX = "G15R0,PA3R0C1,PA3R0C0";
	LC18    : LORAX = "G14R0,PA5R0C0,PA5R0C1";
	LC6     : LORAX = "G27R0,PA10R0C0,PA15R0C1";
	LC17    : LORAX = "G13R0,PA7R0C1,PA7R0C0";
	OH0R0P4 : LORAX = "G43R0,PA20R0C0,PA20R0C1";
	OH1R0P5 : LORAX = "G44R0,PA19R0C1,PA19R0C0";
	LC24    : LORAX = "G33R0,PA10R0C1";
	LC23    : LORAX = "G32R0,PA12R0C1";
	LC32    : LORAX = "G58R0,PA29R0C0";
	LC26    : LORAX = "G39R0,PA25R0C0";
	LC30    : LORAX = "G56R0,PA30R0C0";
	LC27    : LORAX = "G40R0,PA24R0C0";
	LC29    : LORAX = "G55R0,PA27R0C1";
	LC28    : LORAX = "G41R0,PA22R0C1";
	LC31    : LORAX = "G57R0,PA28R0C1";
	LC25    : LORAX = "G38R0,PA18R0C1";
	LC22    : LORAX = "G31R0,PA14R0C0";
	LC8     : LORAX = "G29R0,PA9R0C0";
	LC7     : LORAX = "G28R0,PA16R0C1";
END;