division3.vhd

vhdl3分频功能看名字就知道了

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;

--  Uncomment the following lines to use the declarations that are
--  provided for instantiating Xilinx primitive components.
--library UNISIM;
--use UNISIM.VComponents.all;

entity division3 is
  port (clk: in std_logic;
        out1: out std_logic);
end division3;

architecture Behavioral of division3 is
 signal division2,division4 :std_logic:='0';
 signal temp1,temp2:integer range 0 to 10;
 
begin
 p1:process(clk)
  begin
   if rising_edge(clk) then
    temp1 <=temp1+1;

    if temp1=1 then
     division2<='1';
    elsif temp1=2 then
       division2<='0';
     temp1<=0;
    end if;
      end if;
 end process p1;

 p2:process(clk)
  begin
  if clk'event and clk='0' then
    temp2<=temp2+1;
     if temp2=1 then
  
      division4<='1';
     elsif temp2=2 then
      division4<='0';
      temp2<=0;
    end if;
    end if;
   end process p2;

 p3:process(division2,division4)
 begin
   out1<=division2 or division4;
 end process p3;
 
end Behavioral;