ds-cbr-tb-wrr.tcl

ns-2的文件包。多多下载

#--------------------------------------------------------------------------------
# cbr-tb.tcl
# Author: Jeremy Ethridge.
# Dates: June 29-July 5, 1999.
# Notes: A DS-RED script that uses CBR traffic agents and the Token Bucket policer.
#
#    ----
#    |s1|-----------
#    ----   10 Mb   \
#            5 ms    \
#                     \----           ------          ----           ------
#                      |e1|-----------|core|----------|e2|-----------|dest|
#                     /----   10 Mb   ------   5 Mb   ----   10 Mb   ------
#                    /         5 ms            5 ms           5 ms
#    ----           /
#    |s2|-----------
#    ----   10 Mb
#            5 ms
#
#--------------------------------------------------------------------------------


set ns [new Simulator]

set cir0  1000000
set cbs0    10000
set rate0 4000000
set cir1  1000000
set cbs1    10000
set rate1 4000000

set testTime 85.0
set packetSize 1000


# Set up the network topology shown at the top of this file:
set s1 [$ns node]
set s2 [$ns node]
set e1 [$ns node]
set core [$ns node]
set e2 [$ns node]
set dest [$ns node]

$ns duplex-link $s1 $e1 10Mb 5ms DropTail
$ns duplex-link $s2 $e1 10Mb 5ms DropTail

$ns simplex-link $e1 $core 10Mb 5ms dsRED/edge
$ns simplex-link $core $e1 10Mb 5ms dsRED/core

$ns simplex-link $core $e2 5Mb 5ms dsRED/core
$ns simplex-link $e2 $core 5Mb 5ms dsRED/edge

$ns duplex-link $e2 $dest 10Mb 5ms DropTail


$ns duplex-link-op $s1 $e1 orient down-right
$ns duplex-link-op $s2 $e1 orient up-right
$ns duplex-link-op $e1 $core orient right
$ns duplex-link-op $core $e2 orient right
$ns duplex-link-op $e2 $dest orient right


set qE1C [[$ns link $e1 $core] queue]
set qE2C [[$ns link $e2 $core] queue]
set qCE1 [[$ns link $core $e1] queue]
set qCE2 [[$ns link $core $e2] queue]


# Set DS RED parameters from Edge1 to Core:
$qE1C meanPktSize $packetSize
$qE1C set numQueues_ 1
$qE1C setNumPrec 2
$qE1C addPolicyEntry [$s1 id] [$dest id] TokenBucket 20 $cir0 $cbs0
$qE1C addPolicyEntry [$s2 id] [$dest id] TokenBucket 10 $cir1 $cbs1
$qE1C addPolicerEntry TokenBucket 10 11
$qE1C addPolicerEntry TokenBucket 20 21
$qE1C addPHBEntry 10 0 0
$qE1C addPHBEntry 11 0 1
$qE1C addPHBEntry 20 0 0
$qE1C addPHBEntry 21 0 1
$qE1C configQ 0 0 20 40 0.02
$qE1C configQ 0 1 10 20 0.10


# Set DS RED parameters from Edge2 to Core:
$qE2C meanPktSize $packetSize
$qE2C set numQueues_ 1
$qE2C setNumPrec 2
$qE2C addPolicyEntry [$dest id] [$s1 id] TokenBucket 20 $cir0 $cbs0
$qE2C addPolicyEntry [$dest id] [$s2 id] TokenBucket 10 $cir1 $cbs1
$qE2C addPolicerEntry TokenBucket 10 11
$qE2C addPHBEntry 10 0 0
$qE2C addPHBEntry 11 0 1
$qE2C addPHBEntry 20 0 0
$qE2C addPHBEntry 21 0 1
$qE2C configQ 0 0 20 40 0.02
$qE2C configQ 0 1 10 20 0.10


# Set DS RED parameters from Core to Edge1:
$qCE1 meanPktSize $packetSize
$qCE1 set numQueues_ 1
$qCE1 setNumPrec 2
$qCE1 addPHBEntry 10 0 0
$qCE1 addPHBEntry 11 0 1
$qCE1 addPHBEntry 20 0 0
$qCE1 addPHBEntry 21 0 1
$qCE1 configQ 0 0 20 40 0.02
$qCE1 configQ 0 1 10 20 0.10

# Set DS RED parameters from Core to Edge2:
$qCE2 setSchedularMode WRR
$qCE2 addQueueWeights 0 3
$qCE2 addQueueWeights 1 7
$qCE2 meanPktSize $packetSize
$qCE2 set numQueues_ 2
$qCE2 setNumPrec 2
$qCE2 addPHBEntry 10 0 0
$qCE2 addPHBEntry 11 0 1
$qCE2 addPHBEntry 20 1 0
$qCE2 addPHBEntry 21 1 1
$qCE2 configQ 0 0 20 40 0.02
$qCE2 configQ 0 1 10 20 0.10
$qCE2 configQ 1 0 20 40 0.02
$qCE2 configQ 1 1 10 20 0.10


# Set up one CBR connection between each source and the destination:
set udp0 [new Agent/UDP]
$ns attach-agent $s1 $udp0
set cbr0 [new Application/Traffic/CBR]
$cbr0 attach-agent $udp0
$cbr0 set packet_size_ $packetSize
$udp0 set packetSize_ $packetSize
$cbr0 set rate_ $rate0
set null0 [new Agent/Null]
$ns attach-agent $dest $null0
$ns connect $udp0 $null0

set udp1 [new Agent/UDP]
$ns attach-agent $s2 $udp1
set cbr1 [new Application/Traffic/CBR]
$cbr1 attach-agent $udp1
$cbr1 set packet_size_ $packetSize
$udp1 set packetSize_ $packetSize
$cbr1 set rate_ $rate1
set null1 [new Agent/Null]
$ns attach-agent $dest $null1
$ns connect $udp1 $null1


proc finish {} {
    global ns 
    exit 0
}


$qE1C printPolicyTable
$qE1C printPolicerTable

$ns at 0.0 "$cbr0 start"
$ns at 0.0 "$cbr1 start"
$ns at 20.0 "$qCE2 printStats"
$ns at 40.0 "$qCE2 printStats"
$ns at 60.0 "$qCE2 printStats"
$ns at 80.0 "$qCE2 printStats"
$ns at $testTime "$cbr0 stop"
$ns at $testTime "$cbr1 stop"
$ns at [expr $testTime + 1.0] "finish"

$ns run