threeflift.map.rpt

电梯控制器的设计与分析---控制器的层数为三层,,电梯到达有停站请求的楼层

+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Analysis & Synthesis Resource Utilization by Entity                                                                                                                                                    ;
+----------------------------+-------------+--------------+-------------+------+--------------+-------------------+------------------+-----------------+------------+---------------------+--------------+
; Compilation Hierarchy Node ; Logic Cells ; LC Registers ; Memory Bits ; Pins ; LUT-Only LCs ; Register-Only LCs ; LUT/Register LCs ; Carry Chain LCs ; Packed LCs ; Full Hierarchy Name ; Library Name ;
+----------------------------+-------------+--------------+-------------+------+--------------+-------------------+------------------+-----------------+------------+---------------------+--------------+
; |THREEFLIFT                ; 84 (84)     ; 24           ; 0           ; 18   ; 60 (60)      ; 4 (4)             ; 20 (20)          ; 0 (0)           ; 0 (0)      ; |THREEFLIFT         ; work         ;
+----------------------------+-------------+--------------+-------------+------+--------------+-------------------+------------------+-----------------+------------+---------------------+--------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.


Encoding Type:  One-Hot
+--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; State Machine - |THREEFLIFT|MYLIFT                                                                                                                                                         ;
+------------------+-------------+-------------+-----------+------------------+------------------+------------------+------------------+------------------+-----------------+----------------+
; Name             ; MYLIFT.stop ; MYLIFT.down ; MYLIFT.up ; MYLIFT.doorwait4 ; MYLIFT.doorwait3 ; MYLIFT.doorwait2 ; MYLIFT.doorwait1 ; MYLIFT.doorclose ; MYLIFT.dooropen ; MYLIFT.stopon1 ;
+------------------+-------------+-------------+-----------+------------------+------------------+------------------+------------------+------------------+-----------------+----------------+
; MYLIFT.stopon1   ; 0           ; 0           ; 0         ; 0                ; 0                ; 0                ; 0                ; 0                ; 0               ; 0              ;
; MYLIFT.dooropen  ; 0           ; 0           ; 0         ; 0                ; 0                ; 0                ; 0                ; 0                ; 1               ; 1              ;
; MYLIFT.doorclose ; 0           ; 0           ; 0         ; 0                ; 0                ; 0                ; 0                ; 1                ; 0               ; 1              ;
; MYLIFT.doorwait1 ; 0           ; 0           ; 0         ; 0                ; 0                ; 0                ; 1                ; 0                ; 0               ; 1              ;
; MYLIFT.doorwait2 ; 0           ; 0           ; 0         ; 0                ; 0                ; 1                ; 0                ; 0                ; 0               ; 1              ;
; MYLIFT.doorwait3 ; 0           ; 0           ; 0         ; 0                ; 1                ; 0                ; 0                ; 0                ; 0               ; 1              ;
; MYLIFT.doorwait4 ; 0           ; 0           ; 0         ; 1                ; 0                ; 0                ; 0                ; 0                ; 0               ; 1              ;
; MYLIFT.up        ; 0           ; 0           ; 1         ; 0                ; 0                ; 0                ; 0                ; 0                ; 0               ; 1              ;
; MYLIFT.down      ; 0           ; 1           ; 0         ; 0                ; 0                ; 0                ; 0                ; 0                ; 0               ; 1              ;
; MYLIFT.stop      ; 1           ; 0           ; 0         ; 0                ; 0                ; 0                ; 0                ; 0                ; 0               ; 1              ;
+------------------+-------------+-------------+-----------+------------------+------------------+------------------+------------------+------------------+-----------------+----------------+


+---------------------------------------------------------------------------------------------------+
; User-Specified and Inferred Latches                                                               ;
+----------------------------------------------------+---------------------+------------------------+
; Latch Name                                         ; Latch Enable Signal ; Free of Timing Hazards ;
+----------------------------------------------------+---------------------+------------------------+
; DOUT1[0]$latch                                     ; GND                 ; yes                    ;
; DOUT1[1]$latch                                     ; GND                 ; yes                    ;
; Number of user-specified and inferred latches = 2  ;                     ;                        ;
+----------------------------------------------------+---------------------+------------------------+
Note: All latches listed above may not be present at the end of synthesis due to various synthesis optimizations.


+--------------------------------------------------------------------------------+
; Registers Removed During Synthesis                                             ;
+---------------------------------------+----------------------------------------+
; Register name                         ; Reason for Removal                     ;
+---------------------------------------+----------------------------------------+
; FUPLIGHT[3]                           ; Stuck at GND due to stuck port data_in ;
; FDNLIGHT[1]                           ; Stuck at GND due to stuck port data_in ;
; \CTRLIFT:POS[0]                       ; Merged with POSITION[0]~reg0           ;
; Total Number of Removed Registers = 3 ;                                        ;
+---------------------------------------+----------------------------------------+


+------------------------------------------------------+
; General Register Statistics                          ;
+----------------------------------------------+-------+
; Statistic                                    ; Value ;
+----------------------------------------------+-------+
; Total registers                              ; 24    ;
; Number of registers using Synchronous Clear  ; 0     ;
; Number of registers using Synchronous Load   ; 0     ;
; Number of registers using Asynchronous Clear ; 19    ;
; Number of registers using Asynchronous Load  ; 0     ;
; Number of registers using Clock Enable       ; 9     ;
; Number of registers using Preset             ; 0     ;
+----------------------------------------------+-------+


+--------------------------------------------------+
; Inverted Register Statistics                     ;
+----------------------------------------+---------+
; Inverted Register                      ; Fan out ;
+----------------------------------------+---------+
; POSITION[0]~reg0                       ; 28      ;
; \CTRLIFT:POS[1]                        ; 8       ;
; Total number of inverted registers = 2 ;         ;
+----------------------------------------+---------+


+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
    Info: Version 7.1 Build 156 04/30/2007 SJ Full Version
    Info: Processing started: Mon Dec 24 15:47:42 2007
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off THREEFLIFT -c THREEFLIFT
Info: Found 2 design units, including 1 entities, in source file THREEFLIFT.vhd
    Info: Found design unit 1: THREEFLIFT-A
    Info: Found entity 1: THREEFLIFT
Info: Elaborating entity "THREEFLIFT" for the top level hierarchy
Warning (10631): VHDL Process Statement warning at THREEFLIFT.vhd(211): inferring latch(es) for signal or variable "DOUT1", which holds its previous value in one or more paths through the process
Info (10041): Inferred latch for "DOUT1[0]" at THREEFLIFT.vhd(211)
Info (10041): Inferred latch for "DOUT1[1]" at THREEFLIFT.vhd(211)
Info (10041): Inferred latch for "DOUT1[2]" at THREEFLIFT.vhd(211)
Info (10041): Inferred latch for "DOUT1[3]" at THREEFLIFT.vhd(211)
Warning: Reduced register "FUPLIGHT[3]" with stuck data_in port to stuck value GND
Warning: Reduced register "FDNLIGHT[1]" with stuck data_in port to stuck value GND
Info: Duplicate registers merged to single register
    Info: Duplicate register "\CTRLIFT:POS[0]" merged to single register "POSITION[0]~reg0", power-up level changed
Info: State machine "|THREEFLIFT|MYLIFT" contains 10 states
Info: Selected Auto state machine encoding method for state machine "|THREEFLIFT|MYLIFT"
Info: Encoding result for state machine "|THREEFLIFT|MYLIFT"
    Info: Completed encoding using 10 state bits
        Info: Encoded state bit "MYLIFT.stop"
        Info: Encoded state bit "MYLIFT.down"
        Info: Encoded state bit "MYLIFT.up"
        Info: Encoded state bit "MYLIFT.doorwait4"
        Info: Encoded state bit "MYLIFT.doorwait3"
        Info: Encoded state bit "MYLIFT.doorwait2"
        Info: Encoded state bit "MYLIFT.doorwait1"
        Info: Encoded state bit "MYLIFT.doorclose"
        Info: Encoded state bit "MYLIFT.dooropen"
        Info: Encoded state bit "MYLIFT.stopon1"
    Info: State "|THREEFLIFT|MYLIFT.stopon1" uses code string "0000000000"
    Info: State "|THREEFLIFT|MYLIFT.dooropen" uses code string "0000000011"
    Info: State "|THREEFLIFT|MYLIFT.doorclose" uses code string "0000000101"
    Info: State "|THREEFLIFT|MYLIFT.doorwait1" uses code string "0000001001"
    Info: State "|THREEFLIFT|MYLIFT.doorwait2" uses code string "0000010001"
    Info: State "|THREEFLIFT|MYLIFT.doorwait3" uses code string "0000100001"
    Info: State "|THREEFLIFT|MYLIFT.doorwait4" uses code string "0001000001"
    Info: State "|THREEFLIFT|MYLIFT.up" uses code string "0010000001"
    Info: State "|THREEFLIFT|MYLIFT.down" uses code string "0100000001"
    Info: State "|THREEFLIFT|MYLIFT.stop" uses code string "1000000001"
Warning: Output pins are stuck at VCC or GND
    Warning: Pin "DOUT1[2]" stuck at GND
    Warning: Pin "DOUT1[3]" stuck at GND
Info: Implemented 102 device resources after synthesis - the final resource count might be different
    Info: Implemented 10 input pins
    Info: Implemented 8 output pins
    Info: Implemented 84 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 6 warnings
    Info: Allocated 152 megabytes of memory during processing
    Info: Processing ended: Mon Dec 24 15:47:46 2007
    Info: Elapsed time: 00:00:04