abstract.txt

来自「c8051f330_adc.zip,资源多多共享!不亦乐乎!」· 文本 代码 · 共 33 行

Analog to Digital Converter Example Program
===========================================
Project: ADC
Author:  E. Healy

This example program shows how to configure and use the
A/D Converter of the following microcontroller:

* Silicon Labs C8051F330

After configuring the A/D Converter, the program reads
A/D channel 0 and outputs the value using the serial port.


To run this program...

1. Build the project (Project - Build Target)
2. Start the uVision Debugger
3. Open the Serial Window (View - Serial Window 1)
4. Open the Toolbox (View - Toolbox)
5. Click Go or Run (F5)
6. Click on the Toolbox buttons to change input voltages


A debug script (debug.ini) creates buttons that set different 
analog values in A/D channels.  As the program runs, you 
will see the A/D input and output change.

Other buttons create signals that generate sine wave 
or sawtooth patterns as analog inputs.  礦ision3 users may 
enable the built-in Logic Analyzer to view, measure and compare
these input signals graphically.