counter60.fit.qmsg

VHDL硬件描述

{ "Extra Info" "IFSAC_FSAC_START_LUT_IO_RAM_PACKING" "" "Extra Info: Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" {  } {  } 1 0 "Moving registers into I/O cells, LUTs, and RAM blocks to improve timing and density" 1 0}
{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.677 ns register register " "Info: Estimated most critical path is register to register delay of 2.677 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns Temp_Q1\[3\] 1 REG LAB_X1_Y16 6 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X1_Y16; Fanout = 6; REG Node = 'Temp_Q1\[3\]'" {  } { { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "" { Temp_Q1[3] } "NODE_NAME" } } { "Counter60.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.615 ns) + CELL(0.114 ns) 0.729 ns LessThan0~52 2 COMB LAB_X1_Y16 2 " "Info: 2: + IC(0.615 ns) + CELL(0.114 ns) = 0.729 ns; Loc. = LAB_X1_Y16; Fanout = 2; COMB Node = 'LessThan0~52'" {  } { { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "0.729 ns" { Temp_Q1[3] LessThan0~52 } "NODE_NAME" } } { "d:/altera/61/quartus/libraries/vhdl/synopsys/syn_arit.vhd" "" { Text "d:/altera/61/quartus/libraries/vhdl/synopsys/syn_arit.vhd" 1509 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.539 ns) + CELL(0.114 ns) 1.382 ns Temp_Q2\[0\]~272 3 COMB LAB_X1_Y16 3 " "Info: 3: + IC(0.539 ns) + CELL(0.114 ns) = 1.382 ns; Loc. = LAB_X1_Y16; Fanout = 3; COMB Node = 'Temp_Q2\[0\]~272'" {  } { { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "0.653 ns" { LessThan0~52 Temp_Q2[0]~272 } "NODE_NAME" } } { "Counter60.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.428 ns) + CELL(0.867 ns) 2.677 ns Temp_Q2\[0\] 4 REG LAB_X1_Y16 5 " "Info: 4: + IC(0.428 ns) + CELL(0.867 ns) = 2.677 ns; Loc. = LAB_X1_Y16; Fanout = 5; REG Node = 'Temp_Q2\[0\]'" {  } { { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "1.295 ns" { Temp_Q2[0]~272 Temp_Q2[0] } "NODE_NAME" } } { "Counter60.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.vhd" 16 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.095 ns ( 40.90 % ) " "Info: Total cell delay = 1.095 ns ( 40.90 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "1.582 ns ( 59.10 % ) " "Info: Total interconnect delay = 1.582 ns ( 59.10 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "2.677 ns" { Temp_Q1[3] LessThan0~52 Temp_Q2[0]~272 Temp_Q2[0] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "X0_Y11 X11_Y21 " "Info: The peak interconnect region extends from location X0_Y11 to location X11_Y21" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "Q2\[3\] GND " "Info: Pin Q2\[3\] has GND driving its datain port" {  } { { "Counter60.vhd" "" { Text "C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.vhd" 8 -1 0 } } { "d:/altera/61/quartus/bin/Assignment Editor.qase" "" { Assignment "d:/altera/61/quartus/bin/Assignment Editor.qase" 1 { { 0 "Q2\[3\]" } } } } { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q2[3] } "NODE_NAME" } } { "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/61/quartus/bin/TimingClosureFloorplan.fld" "" "" { Q2[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 2 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 2 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "159 " "Info: Allocated 159 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0} { "Info" "IQEXE_END_BANNER_TIME" "Sat Apr 19 21:58:56 2008 " "Info: Processing ended: Sat Apr 19 21:58:56 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.fit.smsg " "Info: Generated suppressed messages file C:/Documents and Settings/Administrator/桌面/by Kenshin/by Kenshin/Home_Work/Counter60/Counter60.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}