six.fit.qmsg

用ＶＨＤＬ来模拟实现钟最终实现数字电子钟的设计

{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Info: Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "6 unused 3.30 1 1 4 " "Info: Number of I/O pins in group: 6 (unused VREF, 3.30 VCCIO, 1 input, 1 output, 4 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "3.3-V LVTTL. " "Info: I/O standards used: 3.3-V LVTTL." {  } {  } 0 0 "I/O standards used: %1!s!" 0 0 "" 0}  } {  } 0 0 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "Info: I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Info: Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1 does not use undetermined 3 19 " "Info: I/O bank number 1 does not use VREF pins and has undetermined VCCIO pins. 3 total pin(s) used --  19 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 28 " "Info: I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  28 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 26 " "Info: I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  26 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 28 " "Info: I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used --  28 pins available" {  } {  } 0 0 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used --  %5!d! pins available" 0 0 "" 0}  } {  } 0 0 "Statistics of %1!s!" 0 0 "" 0}  } {  } 0 0 "I/O bank details %1!s! I/O pin placement" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.616 ns register register " "Info: Estimated most critical path is register to register delay of 2.616 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns b\[2\]\$latch 1 REG LAB_X12_Y2 4 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X12_Y2; Fanout = 4; REG Node = 'b\[2\]\$latch'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[2]$latch } "NODE_NAME" } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 0 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.540 ns) + CELL(0.114 ns) 0.654 ns Equal0~29 2 COMB LAB_X12_Y2 5 " "Info: 2: + IC(0.540 ns) + CELL(0.114 ns) = 0.654 ns; Loc. = LAB_X12_Y2; Fanout = 5; COMB Node = 'Equal0~29'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.654 ns" { b[2]$latch Equal0~29 } "NODE_NAME" } } { "d:/altera/72/quartus/libraries/vhdl/synopsys/syn_arit.vhd" "" { Text "d:/altera/72/quartus/libraries/vhdl/synopsys/syn_arit.vhd" 1805 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.064 ns) + CELL(0.590 ns) 1.308 ns b~155 3 COMB LAB_X12_Y2 1 " "Info: 3: + IC(0.064 ns) + CELL(0.590 ns) = 1.308 ns; Loc. = LAB_X12_Y2; Fanout = 1; COMB Node = 'b~155'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.654 ns" { Equal0~29 b~155 } "NODE_NAME" } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 5 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.064 ns) + CELL(0.590 ns) 1.962 ns b~156 4 COMB LAB_X12_Y2 1 " "Info: 4: + IC(0.064 ns) + CELL(0.590 ns) = 1.962 ns; Loc. = LAB_X12_Y2; Fanout = 1; COMB Node = 'b~156'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.654 ns" { b~155 b~156 } "NODE_NAME" } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 5 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_NODE_DELAY" "IC(0.212 ns) + CELL(0.442 ns) 2.616 ns b\[3\]\$latch 5 REG LAB_X12_Y2 3 " "Info: 5: + IC(0.212 ns) + CELL(0.442 ns) = 2.616 ns; Loc. = LAB_X12_Y2; Fanout = 3; REG Node = 'b\[3\]\$latch'" {  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "0.654 ns" { b~156 b[3]$latch } "NODE_NAME" } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 0 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0 "" 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "1.736 ns ( 66.36 % ) " "Info: Total cell delay = 1.736 ns ( 66.36 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0 "" 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.880 ns ( 33.64 % ) " "Info: Total interconnect delay = 0.880 ns ( 33.64 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0 "" 0}  } { { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "2.616 ns" { b[2]$latch Equal0~29 b~155 b~156 b[3]$latch } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Info: Average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X0_Y0 X13_Y14 " "Info: Peak interconnect usage is 0% of the available device resources in the region that extends from location X0_Y0 to location X13_Y14" {  } {  } 0 0 "Peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "" 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "" 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0 "" 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0 "" 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0 "" 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0 "" 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0 "" 0}
{ "Warning" "WFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE" "4 " "Warning: Following 4 pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "b\[0\] a permanently enabled " "Info: Pin b\[0\] has a permanently enabled output enable" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { b[0] } } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[0] } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[0] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "b\[1\] a permanently enabled " "Info: Pin b\[1\] has a permanently enabled output enable" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { b[1] } } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[1] } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[1] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "b\[2\] a permanently enabled " "Info: Pin b\[2\] has a permanently enabled output enable" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { b[2] } } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[2] } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[2] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0} { "Info" "IFIOMGR_BIDIR_WITH_TRIVIAL_OUTPUT_ENABLE_SUB" "b\[3\] a permanently enabled " "Info: Pin b\[3\] has a permanently enabled output enable" {  } { { "d:/altera/72/quartus/bin/pin_planner.ppl" "" { PinPlanner "d:/altera/72/quartus/bin/pin_planner.ppl" { b[3] } } } { "six.vhd" "" { Text "D:/EDA/030501713/time/six.vhd" 11 -1 0 } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[3] } "NODE_NAME" } } { "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/72/quartus/bin/TimingClosureFloorplan.fld" "" "" { b[3] } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! output enable" 0 0 "" 0}  } {  } 0 0 "Following %1!d! pins have no output enable or a GND or VCC output enable - later changes to this connectivity may change fitting results" 0 0 "" 0}
{ "Warning" "WFIOMGR_RESERVE_ASSIGNMENT_FOR_UNUSED_PINS_IS_DEFAULT" "As output driving ground " "Warning: The Reserve All Unused Pins setting has not been specified, and will default to 'As output driving ground'." {  } {  } 0 0 "The Reserve All Unused Pins setting has not been specified, and will default to '%1!s!'." 0 0 "" 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "D:/EDA/030501713/time/six.fit.smsg " "Info: Generated suppressed messages file D:/EDA/030501713/time/six.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0 "" 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 3 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 3 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "160 " "Info: Allocated 160 megabytes of memory during processing" {  } {  } 0 0 "Allocated %1!s! megabytes of memory during processing" 0 0 "" 0} { "Info" "IQEXE_END_BANNER_TIME" "Thu Apr 10 08:39:04 2008 " "Info: Processing ended: Thu Apr 10 08:39:04 2008" {  } {  } 0 0 "Processing ended: %1!s!" 0 0 "" 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0 "" 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "" 0}