printer.fit

简单的POC实现与打印机

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 03/09/2008 22:33:45      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "printer"
BEGIN

    DEVICE = "EPF10K30ETC144-1";

    "CLOCK"                        : INPUT_PIN  = 56     ;
    "RESET"                        : INPUT_PIN  = 124    ;
    "TR"                           : INPUT_PIN  = 54     ;
    "RDY"                          : OUTPUT_PIN = 14     ;
    ":21"                          : LOCATION   = LC3_C26;
    ":23"                          : LOCATION   = LC1_C28;
    ":24"                          : LOCATION   = LC4_C26;
    "|74193:2|:6"                  : LOCATION   = LC6_C26;
    "|74193:2|:22"                 : LOCATION   = LC1_C26;
    "|74193:2|:23"                 : LOCATION   = LC1_C34;  -- |74193:2|QD
    "|74193:2|:24"                 : LOCATION   = LC1_C27;  -- |74193:2|QC
    "|74193:2|:25"                 : LOCATION   = LC7_C26;  -- |74193:2|QB
    "|74193:2|:26"                 : LOCATION   = LC5_C26;  -- |74193:2|QA
    "|74193:2|~28~1"               : LOCATION   = LC8_C26;  -- |74193:2|BON~1
    "|74193:2|:50"                 : LOCATION   = LC2_C26;

END;

INTERNAL_INFO "printer"
BEGIN
	DEVICE = EPF10K30ETC144-1;
    OD3P56  : LORAX = "1:FB3|2:FH3R2,PA8R2C25->LC3_C26,->LC6_C26,->LC8_C26,->LC2_C26||";
    OD1P124 : LORAX = "1:FB1|2:FH1R2,PA12R2C25->LC4_C26||";
    OD2P54  : LORAX = "1:FB2->LC1_C34,->LC1_C27,->LC7_C26,->LC5_C26|2:FH2R2,PA12R2C27->LC1_C28||";
    LC1_C28 : LORAX = "1:MSW0R2C27,HHR1R2,PA1R2C25->LC3_C26,->LC4_C26,->LC6_C26,->LC2_C26|";
    LC4_C26 : LORAX = "1:MSW3R2C25,HHR17R2->OH3R2P14|2:PA6R2C27->LC1_C28||";
    LC1_C26 : LORAX = "1:MSW0R2C25,HHR29R2,PA7R2C33->LC1_C34|";
    LC1_C34 : LORAX = "1:MSW0R2C33,HHR7R2,PA7R2C25->LC4_C26|";
    LC1_C27 : LORAX = "1:MSW0R2C26,G65R2,PA16R2C25->LC1_C26,->LC8_C26|";
    LC2_C26 : LORAX = "1:MSW1R2C25,HHR10R2,PA14R2C26->LC1_C27|";
	LC3_C26 : LORAX2 = "X, X, OD3P56, LC1_C28";
	LC1_C28 : LORAX2 = "X, X, OD2P54, LC4_C26";
	LC4_C26 : LORAX2 = "OD1P124, LC8_C26, LC1_C34, LC1_C28";
	LC6_C26 : LORAX2 = "X, OD3P56, LC5_C26, LC1_C28";
	LC1_C26 : LORAX2 = "LC1_C27, LC7_C26, LC5_C26, LC3_C26";
	LC1_C34 : LORAX2 = "X, X, X, LC1_C34";
	LC1_C27 : LORAX2 = "X, X, X, LC1_C27";
	LC7_C26 : LORAX2 = "X, X, X, LC7_C26";
	LC5_C26 : LORAX2 = "X, X, X, LC5_C26";
	LC8_C26 : LORAX2 = "OD3P56, LC1_C27, LC7_C26, LC5_C26";
	LC2_C26 : LORAX2 = "OD3P56, LC7_C26, LC5_C26, LC1_C28";
END;