ex10.bld

[VHDL经典设计26例]--在xilinx芯片上调试通过--[01--1位全加器][02--2选1多路选择器][03--8位硬件加法器][04--7段数码显示译码器][05--8位串入并出寄存器][

Release FPGA Express Synthesis 3.7 - ngdbuild E.38
Copyright (c) 1995-2001 Xilinx, Inc.  All rights reserved.

Command Line: ngdbuild -p xc9572-7-pc84 -uc ex10.ucf -dd ..
D:\TEMP\EDA6000\XC95\EX10\ex10.edf ex10.ngd 

Launcher: Executing edif2ngd "D:\TEMP\EDA6000\XC95\EX10\ex10.edf"
"d:\temp\eda6000\xc95\ex10\xproj\ver2\ex10.ngo"
INFO:NgdBuild - Release FPGA Express Synthesis 3.7 - edif2ngd E.38
INFO:NgdBuild - Copyright (c) 1995-2001 Xilinx, Inc.  All rights reserved.
Writing the design to "d:/temp/eda6000/xc95/ex10/xproj/ver2/ex10.ngo"...
Reading NGO file "d:/temp/eda6000/xc95/ex10/xproj/ver2/ex10.ngo" ...
Reading component libraries for design expansion...

Annotating constraints to design from file "ex10.ucf" ...
ERROR:NgdBuild:397 - Could not find NET 'clk1Hz' in design 'cnt10'.  NET entry
   is 'NET "clk1Hz"    LOC=P10;
   '
ERROR:NgdBuild:397 - Could not find NET 'uclk' in design 'cnt10'.  NET entry is
   'NET "uclk"      LOC=P9 ;
   '
ERROR:NgdBuild:397 - Could not find NET 'led0<3>' in design 'cnt10'.  NET entry
   is 'NET "led0<3>"   LOC=P71;
   '
ERROR:NgdBuild:397 - Could not find NET 'led0<2>' in design 'cnt10'.  NET entry
   is 'NET "led0<2>"   LOC=P68;
   '
ERROR:NgdBuild:397 - Could not find NET 'led0<1>' in design 'cnt10'.  NET entry
   is 'NET "led0<1>"   LOC=P69;
   '
ERROR:NgdBuild:397 - Could not find NET 'led0<0>' in design 'cnt10'.  NET entry
   is 'NET "led0<0>"   LOC=P66;
   '
ERROR:NgdBuild:397 - Could not find NET 'led1<3>' in design 'cnt10'.  NET entry
   is 'NET "led1<3>"   LOC=P77;
   '
ERROR:NgdBuild:397 - Could not find NET 'led1<2>' in design 'cnt10'.  NET entry
   is 'NET "led1<2>"   LOC=P76;
   '
ERROR:NgdBuild:397 - Could not find NET 'led1<1>' in design 'cnt10'.  NET entry
   is 'NET "led1<1>"   LOC=P72;
   '
ERROR:NgdBuild:397 - Could not find NET 'led1<0>' in design 'cnt10'.  NET entry
   is 'NET "led1<0>"   LOC=P70;
   '
ERROR:NgdBuild:397 - Could not find NET 'led2<3>' in design 'cnt10'.  NET entry
   is 'NET "led2<3>"   LOC=P81;
   '
ERROR:NgdBuild:397 - Could not find NET 'led2<2>' in design 'cnt10'.  NET entry
   is 'NET "led2<2>"   LOC=P82;
   '
ERROR:NgdBuild:397 - Could not find NET 'led2<1>' in design 'cnt10'.  NET entry
   is 'NET "led2<1>"   LOC=P79;
   '
ERROR:NgdBuild:397 - Could not find NET 'led2<0>' in design 'cnt10'.  NET entry
   is 'NET "led2<0>"   LOC=P80;
   '
ERROR:NgdBuild:397 - Could not find NET 'led3<3>' in design 'cnt10'.  NET entry
   is 'NET "led3<3>"   LOC=P4 ;
   '
ERROR:NgdBuild:397 - Could not find NET 'led3<2>' in design 'cnt10'.  NET entry
   is 'NET "led3<2>"   LOC=P2 ;
   '
ERROR:NgdBuild:397 - Could not find NET 'led3<1>' in design 'cnt10'.  NET entry
   is 'NET "led3<1>"   LOC=P83;
   '
ERROR:NgdBuild:397 - Could not find NET 'led3<0>' in design 'cnt10'.  NET entry
   is 'NET "led3<0>"   LOC=P84;
   '
ERROR:NgdBuild:397 - Could not find NET 'p_cnt_en' in design 'cnt10'.  NET entry
   is 'NET "p_cnt_en"  LOC=P52;
   '
ERROR:NgdBuild:397 - Could not find NET 'p_rst_cnt' in design 'cnt10'.  NET
   entry is 'NET "p_rst_cnt" LOC=P56;
   '
ERROR:NgdBuild:397 - Could not find NET 'p_load' in design 'cnt10'.  NET entry
   is 'NET "p_load"    LOC=P58;
   

'
ERROR:Parsers:11 - Encountered unrecognized constraint while parsing.
ERROR:NgdBuild:19 - Errors found while parsing constraint file "ex10.ucf".

Writing NGDBUILD log file "ex10.bld"...