📄 trafficlight.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (1.5V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- Bank 1: 3.3V
-- Bank 2: 3.3V
-- Bank 3: 3.3V
-- Bank 4: 3.3V
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
---------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "trafficlight" ASSIGNED TO AN: EP1C3T100C6
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
GND* : 1 : : : : 1 :
GND* : 2 : : : : 1 :
GND* : 3 : : : : 1 :
GND* : 4 : : : : 1 :
GND* : 5 : : : : 1 :
~nCSO~ / GND* : 6 : output : LVTTL : : 1 : N
DATA0 : 7 : input : : : 1 :
nCONFIG : 8 : : : : 1 :
VCCA_PLL1 : 9 : power : : 1.5V : :
CLK : 10 : input : LVTTL : : 1 : N
GNDA_PLL1 : 11 : gnd : : : :
nCEO : 12 : : : : 1 :
nCE : 13 : : : : 1 :
MSEL0 : 14 : : : : 1 :
MSEL1 : 15 : : : : 1 :
DCLK : 16 : bidir : : : 1 :
~ASDO~ / GND* : 17 : output : LVTTL : : 1 : N
VCCIO1 : 18 : power : : 3.3V : 1 :
GND : 19 : gnd : : : :
GND* : 20 : : : : 1 :
GND* : 21 : : : : 1 :
GND* : 22 : : : : 1 :
SEG_Data[0] : 23 : output : LVTTL : : 1 : N
GND* : 24 : : : : 1 :
GND* : 25 : : : : 1 :
GND* : 26 : : : : 4 :
GND* : 27 : : : : 4 :
GND* : 28 : : : : 4 :
GND* : 29 : : : : 4 :
GND : 30 : gnd : : : :
VCCIO4 : 31 : power : : 3.3V : 4 :
GND : 32 : gnd : : : :
VCCINT : 33 : power : : 1.5V : :
GND* : 34 : : : : 4 :
GND* : 35 : : : : 4 :
GND* : 36 : : : : 4 :
GND* : 37 : : : : 4 :
Green1 : 38 : output : LVTTL : : 4 : N
Yellow1 : 39 : output : LVTTL : : 4 : N
Red1 : 40 : output : LVTTL : : 4 : N
SW : 41 : input : LVTTL : : 4 : N
Yellow2 : 42 : output : LVTTL : : 4 : N
GND : 43 : gnd : : : :
VCCINT : 44 : power : : 1.5V : :
GND : 45 : gnd : : : :
VCCIO4 : 46 : power : : 3.3V : 4 :
Green2 : 47 : output : LVTTL : : 4 : N
GND* : 48 : : : : 4 :
GND* : 49 : : : : 4 :
GND* : 50 : : : : 4 :
GND* : 51 : : : : 3 :
GND* : 52 : : : : 3 :
GND* : 53 : : : : 3 :
GND* : 54 : : : : 3 :
GND* : 55 : : : : 3 :
GND* : 56 : : : : 3 :
GND* : 57 : : : : 3 :
GND : 58 : gnd : : : :
VCCIO3 : 59 : power : : 3.3V : 3 :
CONF_DONE : 60 : : : : 3 :
nSTATUS : 61 : : : : 3 :
TCK : 62 : input : : : 3 :
TMS : 63 : input : : : 3 :
TDO : 64 : output : : : 3 :
Red2 : 65 : output : LVTTL : : 3 : N
GND+ : 66 : : : : 3 :
TDI : 67 : input : : : 3 :
SEG_Sel[1] : 68 : output : LVTTL : : 3 : N
SEG_Data[5] : 69 : output : LVTTL : : 3 : N
SEG_Sel[0] : 70 : output : LVTTL : : 3 : N
SEG_Data[7] : 71 : output : LVTTL : : 3 : N
SEG_Data[4] : 72 : output : LVTTL : : 3 : N
SEG_Data[3] : 73 : output : LVTTL : : 3 : N
GND* : 74 : : : : 3 :
GND* : 75 : : : : 3 :
GND* : 76 : : : : 2 :
GND* : 77 : : : : 2 :
SEG_Data[1] : 78 : output : LVTTL : : 2 : N
SEG_Data[2] : 79 : output : LVTTL : : 2 : N
VCCIO2 : 80 : power : : 3.3V : 2 :
GND : 81 : gnd : : : :
VCCINT : 82 : power : : 1.5V : :
GND : 83 : gnd : : : :
Reset : 84 : input : LVTTL : : 2 : N
SEG_Data[6] : 85 : output : LVTTL : : 2 : N
GND* : 86 : : : : 2 :
GND* : 87 : : : : 2 :
GND* : 88 : : : : 2 :
GND* : 89 : : : : 2 :
GND* : 90 : : : : 2 :
GND* : 91 : : : : 2 :
GND* : 92 : : : : 2 :
VCCINT : 93 : power : : 1.5V : :
GND : 94 : gnd : : : :
VCCIO2 : 95 : power : : 3.3V : 2 :
GND : 96 : gnd : : : :
GND* : 97 : : : : 2 :
GND* : 98 : : : : 2 :
GND* : 99 : : : : 2 :
GND* : 100 : : : : 2 :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -