⭐ 欢迎来到虫虫下载站！ | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站
📤 上传资源

📄 altsyncram_jjl1.tdf

📁 本源码介绍了ADS7844 AD转换芯片的VHDL控制器。
💻 TDF
📖 第 1 页 / 共 2 页
字号:
🔍
12 
--altsyncram ADDRESS_ACLR_A="NONE" ADDRESS_ACLR_B="NONE" ADDRESS_REG_B="CLOCK1" CBX_DECLARE_ALL_CONNECTED_PORTS="OFF" CYCLONEII_M4K_COMPATIBILITY="ON" DEVICE_FAMILY="Cyclone" INDATA_ACLR_A="NONE" LOW_POWER_MODE="AUTO" NUMWORDS_A=8 NUMWORDS_B=8 OPERATION_MODE="DUAL_PORT" OUTDATA_ACLR_B="NONE" OUTDATA_REG_B="CLOCK1" POWER_UP_UNINITIALIZED="FALSE" RDCONTROL_ACLR_B="NONE" RDCONTROL_REG_B="CLOCK1" WIDTH_A=16 WIDTH_B=16 WIDTH_BYTEENA_A=1 WIDTHAD_A=3 WIDTHAD_B=3 WRCONTROL_ACLR_A="NONE" address_a address_b clock0 clock1 data_a q_b rden_b wren_a CARRY_CHAIN="MANUAL" CARRY_CHAIN_LENGTH=48
--VERSION_BEGIN 6.0 cbx_altsyncram 2006:03:30:14:59:04:SJ cbx_cycloneii 2006:02:07:15:19:20:SJ cbx_lpm_add_sub 2006:01:09:11:17:20:SJ cbx_lpm_compare 2006:01:09:11:15:40:SJ cbx_lpm_decode 2006:01:09:11:16:44:SJ cbx_lpm_mux 2006:01:09:11:16:16:SJ cbx_mgl 2006:04:14:11:14:36:SJ cbx_stratix 2006:02:07:15:17:04:SJ cbx_stratixii 2006:03:03:09:35:36:SJ cbx_util_mgl 2006:01:09:10:46:36:SJ  VERSION_END


--  Copyright (C) 1991-2006 Altera Corporation
--  Your use of Altera Corporation's design tools, logic functions 
--  and other software and tools, and its AMPP partner logic 
--  functions, and any output files any of the foregoing 
--  (including device programming or simulation files), and any 
--  associated documentation or information are expressly subject 
--  to the terms and conditions of the Altera Program License 
--  Subscription Agreement, Altera MegaCore Function License 
--  Agreement, or other applicable license agreement, including, 
--  without limitation, that your use is for the sole purpose of 
--  programming logic devices manufactured by Altera and sold by 
--  Altera or its authorized distributors.  Please refer to the 
--  applicable agreement for further details.


PARAMETERS
(
	PORT_A_ADDRESS_WIDTH = 1,
	PORT_A_BYTE_ENABLE_MASK_WIDTH = 1,
	PORT_A_DATA_WIDTH = 1,
	PORT_B_ADDRESS_WIDTH = 1,
	PORT_B_BYTE_ENABLE_MASK_WIDTH = 1,
	PORT_B_DATA_WIDTH = 1
);
FUNCTION cyclone_ram_block (clk0, clk1, clr0, clr1, ena0, ena1, portaaddr[PORT_A_ADDRESS_WIDTH-1..0], portabyteenamasks[PORT_A_BYTE_ENABLE_MASK_WIDTH-1..0], portadatain[PORT_A_DATA_WIDTH-1..0], portawe, portbaddr[PORT_B_ADDRESS_WIDTH-1..0], portbbyteenamasks[PORT_B_BYTE_ENABLE_MASK_WIDTH-1..0], portbdatain[PORT_B_DATA_WIDTH-1..0], portbrewe)
WITH ( 	CONNECTIVITY_CHECKING,	DATA_INTERLEAVE_OFFSET_IN_BITS,	DATA_INTERLEAVE_WIDTH_IN_BITS,	DONT_POWER_OPTIMIZE,	INIT_FILE,	INIT_FILE_LAYOUT,	LOGICAL_RAM_NAME,	mem_init0,	mem_init1,	MIXED_PORT_FEED_THROUGH_MODE,	OPERATION_MODE,	PORT_A_ADDRESS_CLEAR,	PORT_A_ADDRESS_WIDTH,	PORT_A_BYTE_ENABLE_CLEAR,	PORT_A_BYTE_ENABLE_MASK_WIDTH,	PORT_A_DATA_IN_CLEAR,	PORT_A_DATA_OUT_CLEAR,	PORT_A_DATA_OUT_CLOCK,	PORT_A_DATA_WIDTH,	PORT_A_FIRST_ADDRESS,	PORT_A_FIRST_BIT_NUMBER,	PORT_A_LAST_ADDRESS,	PORT_A_LOGICAL_RAM_DEPTH,	PORT_A_LOGICAL_RAM_WIDTH,	PORT_A_WRITE_ENABLE_CLEAR,	PORT_B_ADDRESS_CLEAR,	PORT_B_ADDRESS_CLOCK,	PORT_B_ADDRESS_WIDTH,	PORT_B_BYTE_ENABLE_CLEAR,	PORT_B_BYTE_ENABLE_CLOCK,	PORT_B_BYTE_ENABLE_MASK_WIDTH,	PORT_B_DATA_IN_CLEAR,	PORT_B_DATA_IN_CLOCK,	PORT_B_DATA_OUT_CLEAR,	PORT_B_DATA_OUT_CLOCK,	PORT_B_DATA_WIDTH,	PORT_B_FIRST_ADDRESS,	PORT_B_FIRST_BIT_NUMBER,	PORT_B_LAST_ADDRESS,	PORT_B_LOGICAL_RAM_DEPTH,	PORT_B_LOGICAL_RAM_WIDTH,	PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR,	PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK,	POWER_UP_UNINITIALIZED,	RAM_BLOCK_TYPE) 
RETURNS ( portadataout[PORT_A_DATA_WIDTH-1..0], portbdataout[PORT_B_DATA_WIDTH-1..0]);

--synthesis_resources = M4K 16 
OPTIONS ALTERA_INTERNAL_OPTION = "OPTIMIZE_POWER_DURING_SYNTHESIS=NORMAL_COMPILATION";

SUBDESIGN altsyncram_jjl1
( 
	address_a[2..0]	:	input;
	address_b[2..0]	:	input;
	clock0	:	input;
	clock1	:	input;
	data_a[15..0]	:	input;
	q_b[15..0]	:	output;
	rden_b	:	input;
	wren_a	:	input;
) 
VARIABLE 
	ram_block1a0 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 0,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 0,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a1 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 1,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 1,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a2 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 2,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 2,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a3 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 3,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 3,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a4 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 4,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 4,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a5 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 5,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 5,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a6 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 6,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 6,
			PORT_B_LAST_ADDRESS = 7,
			PORT_B_LOGICAL_RAM_DEPTH = 8,
			PORT_B_LOGICAL_RAM_WIDTH = 16,
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLEAR = "none",
			PORT_B_READ_ENABLE_WRITE_ENABLE_CLOCK = "clock1",
			POWER_UP_UNINITIALIZED = "false",
			RAM_BLOCK_TYPE = "auto"
		);
	ram_block1a7 : cyclone_ram_block
		WITH (
			CONNECTIVITY_CHECKING = "OFF",
			LOGICAL_RAM_NAME = "ALTSYNCRAM",
			MIXED_PORT_FEED_THROUGH_MODE = "dont_care",
			OPERATION_MODE = "dual_port",
			PORT_A_ADDRESS_CLEAR = "none",
			PORT_A_ADDRESS_WIDTH = 3,
			PORT_A_DATA_IN_CLEAR = "none",
			PORT_A_DATA_WIDTH = 1,
			PORT_A_FIRST_ADDRESS = 0,
			PORT_A_FIRST_BIT_NUMBER = 7,
			PORT_A_LAST_ADDRESS = 7,
			PORT_A_LOGICAL_RAM_DEPTH = 8,
			PORT_A_LOGICAL_RAM_WIDTH = 16,
			PORT_A_WRITE_ENABLE_CLEAR = "none",
			PORT_B_ADDRESS_CLEAR = "none",
			PORT_B_ADDRESS_CLOCK = "clock1",
			PORT_B_ADDRESS_WIDTH = 3,
			PORT_B_DATA_OUT_CLEAR = "none",
			PORT_B_DATA_OUT_CLOCK = "clock1",
			PORT_B_DATA_WIDTH = 1,
			PORT_B_FIRST_ADDRESS = 0,
			PORT_B_FIRST_BIT_NUMBER = 7,
			PORT_B_LAST_ADDRESS = 7,
12

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -