model3_select.v

一个圣诞彩灯控制芯片的vrilog源代码

module model3_select(l1,l2,l3,l4,c,en1,en2,reset,en,clk,c1,c2,l11,l12,l13,l14,l21,l22,l23,l24);
  output [1:0] l1,l2,l3,l4;
  output c,en1,en2;
  input reset,en,clk,c1,c2;
  input [1:0] l11,l12,l13,l14,l21,l22,l23,l24;
  reg [1:0] l1,l2,l3,l4;
  reg c,en1,en2;
  wire [1:0] l11,l12,l13,l14,l21,l22,l23,l24;
  reg [1:0] i;

  always@(posedge clk or negedge reset)
  begin
   if(reset==1'b0)
     begin
      i<=2'b00; en1<=1'b0; en2<=1'b0;  
      l1<=2'b00; l2<=2'b00; l3<=2'b00; l4<=2'b00; c<=1'b0;
     end
   else if(en==1'b1)
        begin
         if(i<2'd1)
           begin
             en1<=1'b1; en2<=1'b0;  
             l1<=l11; l2<=l12; l3<=l13; l4<=l14; c<=1'b0;
             if(c1==1'b1) 
               i<=i+2'b01;
          end
        else if(i<2'd3)
           begin
             en1<=1'b0; en2<=1'b1;  
             l1<=l21; l2<=l22; l3<=l23; l4<=l24; c<=1'b0;
             if(c2==1'b1)
               i<=i+2'b01;
           end
                        else if(i==2'd3)
                                 begin
                                   en1<=1'b0; en2<=1'b0;  
                                   l1<=2'b00; l2<=2'b00; l3<=2'b00; l4<=2'b00; c<=1'b1;
                                   i<=2'b00;
                                 end
       end
else
  begin
    en1<=1'b0; en2<=1'b0;  
    l1<=2'b00; l2<=2'b00; l3<=2'b00; l4<=2'b00; c<=1'b0;
    i<=2'b00;
  end
end

endmodule