📄 _impact.log
字号:
iMPACT Version: H.42
iMPACT log file started on 2008/01/14 09:31:13
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setPreference -pref UserLevel:NOVICE
// *** BATCH CMD : setPreference -pref MessageLevel:DETAILED
// *** BATCH CMD : setPreference -pref ConcurrentMode:FALSE
// *** BATCH CMD : setPreference -pref UseHighz:FALSE
// *** BATCH CMD : setPreference -pref ConfigOnFailure:STOP
// *** BATCH CMD : setPreference -pref StartupCLock:AUTO_CORRECTION
// *** BATCH CMD : setPreference -pref AutoSignature:FALSE
// *** BATCH CMD : setPreference -pref KeepSVF:FALSE
// *** BATCH CMD : setPreference -pref svfUseTime:FALSE
// *** BATCH CMD : setMode -bs
GUI --- Auto connect to cable...
// *** BATCH CMD : setCable -port auto
AutoDetecting cable. Please wait.
CB_PROGRESS_START - Starting Operation.
Connecting to cable (USB Port).
Cable connection failed.
Connecting to cable (Parallel Port - LPT1).
Checking cable driver.
Driver windrvr6.sys version = 6.2.2.2. LPT base address = 0378h.
ECP base address = FFFFFFFFh.
Cable connection established.
CB_PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....done.
ERROR:iMPACT:585 - A problem may exist in the hardware configuration.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the power supply is adequate and delivering the correct voltage.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 39 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....done.
ERROR:iMPACT:585 - A problem may exist in the hardware configuration.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the power supply is adequate and delivering the correct voltage.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....done.
ERROR:iMPACT:585 - A problem may exist in the hardware configuration.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the power supply is adequate and delivering the correct voltage.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....done.
ERROR:iMPACT:585 - A problem may exist in the hardware configuration.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
Check that the cable, scan chain, and power connections are intact,
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the specified scan chain configuration matches the actual hardware, and
that the power supply is adequate and delivering the correct voltage.
that the power supply is adequate and delivering the correct voltage.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 2 sec.
// *** BATCH CMD : Identify
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc4vsx35, Version : 4
INFO:iMPACT:1777 -
Reading C:/Xilinx/virtex4/data/xc4vsx35.bsd...
Reading C:/Xilinx/virtex4/data/xc4vsx35.bsd...
INFO:iMPACT:501 - '1': Added Device xc4vsx35 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
'2': : Manufacturer's ID =Xilinx xcf16p, Version : 15
INFO:iMPACT:1777 -
Reading C:/Xilinx/xcfp/data/xcf16p.bsd...
Reading C:/Xilinx/xcfp/data/xcf16p.bsd...
INFO:iMPACT:501 - '1': Added Device xcf16p successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time = 1 sec.
// *** BATCH CMD : setAttribute -position 2 -attr configFileName -value "D:\FOUND.000\uart\uart.bit"
'2': Loading file 'D:\FOUND.000\uart\uart.bit' ...
done.
WARNING:iMPACT:2257 - Startup Clock has been changed to 'JtagClk' in the bitstream stored in memory,
but the original bitstream file remains unchanged.
but the original bitstream file remains unchanged.
INFO:iMPACT:501 - '2': Added Device xc4vsx35 successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
// *** BATCH CMD : Program -p 2
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2':Programming device...
done.
'2': Reading status register contents...
CRC error : 0
Decryptor security set : 0
DCM locked : 1
DCI matched : 1
End of startup signal from Startup block : 1
status of GTS_CFG_B : 1
status of GWE : 1
status of GHIGH : 1
value of MODE pin M0 : 0
value of MODE pin M1 : 0
Value of MODE pin M2 : 0
Internal signal indicates when housecleanign is completed: 1
Value driver in from INIT pad : 1
Internal signal indicates that chip is configured : 1
Value of DONE pin : 1
Indicates when ID value written does not match chip ID: 0
Decryptor error Signal : 0
System Monitor Over-Temperature Alarm : 0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0001 1110 0000 0000 0000 0000
INFO:iMPACT:579 - '2': Completed downloading bit file to device.
INFO:iMPACT:580 - '2':Checking done pin ....done.
'2': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 71 sec.
// *** BATCH CMD : Program -p 2
PROGRESS_START - Starting Operation.
Validating chain...
Boundary-scan chain validated successfully.
'2':Programming device...
done.
'2': Reading status register contents...
CRC error : 0
Decryptor security set : 0
DCM locked : 1
DCI matched : 1
End of startup signal from Startup block : 1
status of GTS_CFG_B : 1
status of GWE : 1
status of GHIGH : 1
value of MODE pin M0 : 0
value of MODE pin M1 : 0
Value of MODE pin M2 : 0
Internal signal indicates when housecleanign is completed: 1
Value driver in from INIT pad : 1
Internal signal indicates that chip is configured : 1
Value of DONE pin : 1
Indicates when ID value written does not match chip ID: 0
Decryptor error Signal : 0
System Monitor Over-Temperature Alarm : 0
INFO:iMPACT:2219 - Status register values:
INFO:iMPACT - 0011 1111 0001 1110 0000 0000 0000 0000
INFO:iMPACT:579 - '2': Completed downloading bit file to device.
INFO:iMPACT:580 - '2':Checking done pin ....done.
'2': Programmed successfully.
PROGRESS_END - End Operation.
Elapsed time = 69 sec.
***** Closing iMPACT program. *****
----------------------------------------------------------------------
----------------------------------------------------------------------
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -