xccpld.pad

通过PC104访问内存地址

Release 7.1i - Fit H.42
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved

 1-12-2008  9:22AM

NOTE: This file is designed to be imported into a spreadsheet program
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
character is used as the data field separator.
This file is also designed to support parsing.

Input file:  xccpld.ngd
output file: xccpld.pad
Part type:   xc9536
Speed grade: -10
Package:     vq44

Pinout by Pin Number:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|{blank}|Slew Rate|Termination|{blank}|Voltage|Constraint|
P1|RST|O|I/O/GCK3|OUTPUT|||||||||
P2|DEFSUP|O|I/O|OUTPUT|||||||||
P3|IRQ|O|I/O|OUTPUT|||||||||
P4|GND||GND||||||||||
P5|ALE|O|I/O|OUTPUT|||||||||
P6|WR|O|I/O|OUTPUT|||||||||
P7|RD|O|I/O|OUTPUT|||||||||
P8|CS|O|I/O|OUTPUT|||||||||
P9|TDI||TDI||||||||||
P10|TMS||TMS||||||||||
P11|TCK||TCK||||||||||
P12|TIE||I/O||||||||||
P13|A<9>|I|I/O|INPUT|||||||||
P14|A<10>|I|I/O|INPUT|||||||||
P15|VCC||VCCINT||||||||||
P16|A<11>|I|I/O|INPUT|||||||||
P17|GND||GND||||||||||
P18|A<12>|I|I/O|INPUT|||||||||
P19|A<13>|I|I/O|INPUT|||||||||
P20|A<14>|I|I/O|INPUT|||||||||
P21|A<15>|I|I/O|INPUT|||||||||
P22|A<16>|I|I/O|INPUT|||||||||
P23|A<17>|I|I/O|INPUT|||||||||
P24|TDO||TDO||||||||||
P25|GND||GND||||||||||
P26|VCC||VCCIO||||||||||
P27|A<18>|I|I/O|INPUT|||||||||
P28|A<19>|I|I/O|INPUT|||||||||
P29|SMEMR|I|I/O|INPUT|||||||||
P30|SMEMW|I|I/O|INPUT|||||||||
P31|TIE||I/O||||||||||
P32|IRQ9|I|I/O|INPUT|||||||||
P33|TIE||I/O/GSR||||||||||
P34|TIE||I/O/GTS2||||||||||
P35|VCC||VCCINT||||||||||
P36|TIE||I/O/GTS1||||||||||
P37|TIE||I/O||||||||||
P38|TIE||I/O||||||||||
P39|TIE||I/O||||||||||
P40|TIE||I/O||||||||||
P41|TIE||I/O||||||||||
P42|TIE||I/O||||||||||
P43|TIE||I/O/GCK1||||||||||
P44|TIE||I/O/GCK2||||||||||

To preserve the pinout above for future design iterations in
Project Navigator simply execute the (Lock Pins) process
located under the (Implement Design) process in a toolbox named
(Optional Implementation Tools) or invoke PIN2UCF from the
command line. The location constraints will be written into your
specified UCF file