xccpld.lpc

通过PC104访问内存地址

# xccpld.lpc 
# The constraints in this file were created simply to be viewed.  
# If you wish to use these constraints, please copy them into your  
# project's constraint file. If you do not have a project constraints  
# file yet, please use the "Project->New Source" menu to create one.


#NET "RST"     LOC = "P1";
#NET "DEFSUP"  LOC = "P2";
#NET "IRQ"     LOC = "P3";
#NET "ALE"     LOC = "P5";
#NET "WR"      LOC = "P6";
#NET "RD"      LOC = "P7";
#NET "CS"      LOC = "P8";
#NET "IRQ5"    LOC = "P12";
#NET "A<9>"    LOC = "P13";
#NET "A<10>"   LOC = "P14";
#NET "A<11>"   LOC = "P16";
#NET "A<12>"   LOC = "P18";
#NET "A<13>"   LOC = "P19";
#NET "A<14>"   LOC = "P20";
#NET "A<15>"   LOC = "P21";
#NET "A<16>"   LOC = "P22";
#NET "A<17>"   LOC = "P23";
#NET "A<18>"   LOC = "P27";
#NET "A<19>"	  LOC = "P28";
#NET "SMEMR"	  LOC = "P29";
#NET "SMEMW"   LOC = "P30";
#NET "IRQ9"    LOC = "P32";
#NET "RESET"   LOC = "P33";
#NET "AEN"     LOC = "P44";

#PINLOCK_BEGIN

#Wed Jan 09 17:12:17 2008

NET "A<10>"          LOC =  "S:PIN14";
NET "A<11>"          LOC =  "S:PIN16";
NET "A<12>"          LOC =  "S:PIN18";
NET "A<13>"          LOC =  "S:PIN19";
NET "A<14>"          LOC =  "S:PIN20";
NET "A<15>"          LOC =  "S:PIN21";
NET "A<16>"          LOC =  "S:PIN22";
NET "A<17>"          LOC =  "S:PIN23";
NET "A<18>"          LOC =  "S:PIN27";
NET "A<19>"          LOC =  "S:PIN28";
NET "A<9>"           LOC =  "S:PIN13";
NET "IRQ9"           LOC =  "S:PIN32";
NET "SMEMR"          LOC =  "S:PIN29";
NET "RESET"          LOC =  "S:PIN33";
NET "SMEMW"          LOC =  "S:PIN30";
NET "ALE"            LOC =  "S:PIN5";
NET "CS"             LOC =  "S:PIN8";
NET "DEFSUP"         LOC =  "S:PIN2";
NET "IRQ"            LOC =  "S:PIN3";
NET "RD"             LOC =  "S:PIN7";
NET "RST"            LOC =  "S:PIN1";
NET "WR"             LOC =  "S:PIN6";
#PINLOCK_END