config.it

现在很火的邮件客户端软件thunderbird的源码

;   AUTO  - Don't show unless a component has its reboot show value set to
;           TRUE or there was at least one file in use and a reboot is
;           is required for the file to be replaced correctly.
Show Dialog=AUTO

[Check Instance0]
Class Name=ThunderbirdMessageWindow
Window Name=
Process Name=$MainExeFile$
Pretty Name=$ProductNameInternal$
Message={Check_Message}
Message Full Installer={Check_FullMessage}
Message wait={Check_Wait}

; This key indicates whether or not to close all the windows associated with
; the process id of this app instance window found.
Close All Process Windows=TRUE

; These keys are not normally necessary for checking instances.  They are
; set here because Mozilla requires a way to shut down it's turbo mode.
Extra Cmd0 Reg Key Root=HKEY_LOCAL_MACHINE
Extra Cmd0 Reg Key=Software\Microsoft\Windows\CurrentVersion\App Paths\$MainExeFile$
Extra Cmd0 Reg Name=
Extra Cmd0 Parameter=-kill

;DependeeX=Component A means
;  - if Component A gets checked this component gets checked
;  - if Component A gets unchecked this component gets unchecked
;  - if this component is visible it can still be checked/unchecked
;      independantly after Component A has changed its state.  I.e
;      this components checkbox will not be disabled or hidden.
;Dependee0=
;
;DependencyX= is not supported at this time. 
;Dependency0=
;
; Attributes can be the following values:
;
;   The following Attributes can be overridden:
;   ------------------------------------------
;
;   SELECTED      - Component is selected to be installed by default.
;
;   UNSELECTED    - Component is to be displayed unselected in the Options
;                   dialog.  If the component is listed in the non-custom
;                   Setup Type section, it will be assumed to be selected
;                   by default.
;
;   ADDITIONAL    - Component is to be shown in the Additional Options
;                   dialog (2nd Options dialog) instead of the 1st Options
;                   dialog.
;
;   NOTADDITIONAL - Component will be shown (if visible) in the 1st
;                   1st Options dialog rather than the Additional Options
;                   dialog (default).
;
;   VISIBLE       - Component is shown in one of the two Options dialogs
;                   (default).
;
;   INVISIBLE     - Component is not shown in either of the two Options dialogs.
;
;   ENABLED       - Component is to be shown as enabled (not greyed out) in
;                   either of the two Options dialogs.
;                   (default).
;
;   DISABLED      - Component is to be shown as disabled (greyed out) in
;                   either of two Options dialog.
;
;
;   The following attributes cannot be overridden:
;   ---------------------------------------------
;
;   LAUNCHAPP     - Component is downloaded and simply run (like a .exe file)
;                   after all the components have been downloaded and
;                   xpinstall'ed.
;
;   DOWNLOAD_ONLY - Component is to be only downloaded to the ns_temp folder,
;                   then deleted as Setup is quitting.
;
;   FORCE_UPGRADE - Force Upgrade checks for a particular file or directory
;                   provided in the Force Upgrade FileX= key(s).  If any of
;                   the listed file or directory exists, then this component
;                   will have its SELECTED and DISABLED Attributes set
;                   automatically.  Force Upgrade will override the following:
;
;                       Random Install Percentage= setting
;                       UNSELECTED Attribute setting
;                       Dependency settings
;                       Dependee settings
;                       Setup Type settings - meaning that even if this
;                                             component is not listed in the
;                                             selected Setup Type, it will be
;                                             affected.
;
;   IGNORE_DOWNLOAD_ERROR  - If the component needs to be downloaded from a
;                            server, setting this attribute will indicate that
;                            any download error encountered will be ignored
;                            and treated as if there were no error.
;                            If the component does not need to be downloaded,
;                            then this attribute has no effect.
;
;   IGNORE_XPINSTALL_ERROR - If the component is a .xpi file, then any error
;                            resulting from the installation of the .xpi file
;                            will be ignored.  If the .xpi file is not to be
;                            installed, then this attribute is ignored.
;
;   SUPERSEDE     - Component is to be shown as disabled and unselected
;                   if a file exists.
;                   Use SupersedeType=File Exists to specify the type of comparison
;                   Use SupersedeFileX=File Name to specify the file
;                   Use SupersedeMinVersionX=a.b.c.d (optional) to specify the 
;                   minimum version of the file.  If the version of the existing file
;                   is greater than or equal to the SupersedeMinVersion the component
;                   will be superseded.
;

;We're not installing Component XPCOM because we're using it
;for it's xpinstall engine from the TEMP dir.  The files that
;this component has are already in Component GRE.
[Component XPCOM]
Description Short={Component_XPCOM}
Description Long={Component_XPCOM}
Archive=xpcom.xpi
$InstallSize$:xpcom
$InstallSizeSystem$
$InstallSizeArchive$:xpcom.xpi
Attributes=SELECTED|INVISIBLE
FileCount=$FileCount$

[Component Mail]
Description Short={Component_Mail}
Description Long={Component_Mail}
Archive=mail.xpi
$InstallSize$:mail
$InstallSizeSystem$
$InstallSizeArchive$:mail.xpi
Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE|MAIN_COMPONENT
Force Upgrade File0=[SETUP PATH]\$MainExeFile$
FileCount=$FileCount$

[Component RSS]
Description Short={Component_RSS}
Description Long={Component_RSS_Long}
Archive=newsblog.xpi
$InstallSize$:newsblog
$InstallSizeArchive$:newsblog.xpi
Attributes=SELECTED|FORCE_UPGRADE|INVISIBLE
Force Upgrade File0=[SETUP PATH]\chrome\newsblog.jar
FileCount=$FileCount$

;[Component ADT]
;Description Short=Developer Tools
;*** LOCALIZE ME BABY ***
;Description Long=Tools for web developers including the Document Inspector. 
;Archive=adt.xpi
;$InstallSize$:adt
;$InstallSizeArchive$:adt.xpi
;Attributes=FORCE_UPGRADE|VISIBLE
;Force Upgrade File0=[SETUP PATH]\chrome\inspector.jar
;FileCount=$FileCount$

[Component Langpack]
Description Short={AB_CD} {LANGPACK_TITLE}
Description Long={AB_CD} {LANGPACK_TITLE}
Archive={AB_CD}.xpi
Install Size=512
Install Size System=1
Install Size Archive=512
Attributes=SELECTED|INVISIBLE|FORCE_UPGRADE
Force Upgrade File0=[SETUP PATH]\chrome\{AB_CD}.jar
FileCount=$FileCount$

[Component QFA]
Description Short={Component_QFA}
Description Long={Component_QFA_Long}
Archive=talkback.xpi
$InstallSize$:talkback
$InstallSizeSystem$
$InstallSizeArchive$:talkback.xpi
Attributes=SELECTED|FORCE_UPGRADE
Force Upgrade File0=[SETUP PATH]\extensions\[e-mail]\components\fullsoft.dll
FileCount=$FileCount$
; This is to randomly set the default checkbox for this component.
; This particular value will set the checkbox checked [number]% of the time.
; This logic is done only during the initialization of setup, not in any
; particular dialog.
Random Install Percentage=100

[Core]
Source=[XPI PATH]\xpcom.xpi
Destination=[WIZTEMP]\xpcom.ns
$InstallSize$:xpcom
Cleanup=TRUE
;*** LOCALIZE ME BABY ***
Message=Preparing Install, please wait...
; Status= values: Disabled, Enabled
; If nothing is set, default value is Enabled.  If set to Disabled,
; it will then use GRE as the xpinstall engine, in which case, there
; should be a GRE component in this installer package!
Status=Enabled

[Redirect]
Status=Disabled
; This is used in conjunction with the Site Selector info to build a
; url to where to download the needed redirect.ini file from.
; If there's more than one server path, they will be used as fail
; over paths.
;
; The Server Path= keys need to be named in the following convention:
;
;   Server Path0=
;   Server Path1=
;   Server Path2=
;
; and so on...
Server Path=redirect.ini
;*** LOCALIZE ME BABY ***
Description=Redirect File
Message=


; The Timing key needs to be one of the following values:
;   pre download     - process before any files have been downloaded.
;   post download    - process after all files have been downloaded.
;   pre xpcom        - process before the xpcom file has been uncompressed.
;   post xpcom       - process after the xpcom file has been uncompressed.
;   pre smartupdate  - process before the smartupdate engine has been launched.
;   post smartupdate - process after the smartupdate engine has been launched.
;   pre launchapp    - process before the launching of executables.
;   post launchapp   - process after the launching of executables.
;   pre archive      - process before the launching of each individual archive file.
;   post archive     - process after the launching of each individual archive file.
;   depend reboot    - process depending on if a reboot is necessary or not.
;                      if reboot is necessary, installer can set it up so
;                      the app runs once upon windows reboot.

;Copy FileX sections

; nss3.dll, softokn3.dll, ssl3.dll, and smime3.dll all need to be copied from
; the GRE dir to the destination app folder (see bug 202326)
[Copy File2]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\nss3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File3]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\softokn3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File4]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\softokn3.chk
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File5]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\ssl3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File6]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\smime3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File7]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\freebl3.dll
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Copy File8]
Timing=post smartupdate
Source=[$GRE_INSTALL_DIR]\freebl3.chk
Destination=[SETUP PATH]
Fail If Exists=FALSE
Do Not Uninstall=FALSE

[Path Lookup $GRE_INSTALL_DIR]
Path Reg Key Root=HKEY_LOCAL_MACHINE
Path Reg Key=Software\mozilla.org\GRE\$GreUniqueID$\Main
Path Reg Name=Install Directory
Strip Filename=FALSE


;Copy File SequentialX sections
[Copy File Sequential0]
Timing=post smartupdate
Filename=install_wizard.log
Source=[SETUP PATH]
Destination=[SETUP PATH]\uninstall


;Create DirectoryX sections
[Create Directory0]
Timing=post download
Destination=[SETUP PATH]\plugins


;Delete FileX sections
[Delete File0]
Timing=post download
Destination=[COMMON_PROGRAMS]\Mozilla Seamonkey\Mozilla AppRunner.lnk

[Delete File1]
Timing=post smartupdate
Destination=[SETUP PATH]\install_wizard.log


;Remove DirectoryX sections
;[Remove Directory0]
;Timing=post launchapp
;Destination=[TEMP]\xtratest
;Remove subdirs=TRUE


;RunAppX sections
[RunApp0]
Timing=depend reboot
Wait=FALSE
Target=[SETUP PATH]\$MainExeFile$
Parameters=-installer
WorkingDir=[SETUP PATH]

[Windows Registry0]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$
Name=
Name Value=
Type=REG_SZ
Decrypt Key=FALSE
Decrypt Name=FALSE
Decrypt Name Value=TRUE
Overwrite Key=TRUE
Overwrite Name=TRUE
Timing=pre smartupdate

[Windows Registry1]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$\$ProductName$
Name=
Name Value=
Type=REG_SZ
Decrypt Key=FALSE
Decrypt Name=FALSE
Decrypt Name Value=TRUE
Overwrite Key=TRUE
Overwrite Name=TRUE
Timing=pre smartupdate

[Windows Registry2]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$\$ProductName$\$UserAgent$
Name=
Name Value=
Type=REG_SZ
Decrypt Key=FALSE
Decrypt Name=FALSE
Decrypt Name Value=TRUE
Overwrite Key=TRUE
Overwrite Name=TRUE
Timing=pre smartupdate

[Windows Registry3]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Main
Name=Program Folder Path
Name Value=[Default Folder]
Type=REG_SZ
Decrypt Key=FALSE
Decrypt Name=FALSE
Decrypt Name Value=TRUE
Overwrite Key=TRUE
Overwrite Name=TRUE
Timing=pre smartupdate

[Windows Registry4]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
Name=Description
Name Value=$ProductName$ ($UserAgentShort$)
Type=REG_SZ
Decrypt Key=FALSE
Decrypt Name=FALSE
Decrypt Name Value=FALSE
Overwrite Key=TRUE
Overwrite Name=TRUE
Timing=pre smartupdate

[Windows Registry5]
Root Key=HKEY_LOCAL_MACHINE
Key=Software\$CompanyName$\$ProductName$\$UserAgent$\Uninstall
Name=Uninstall Log Folder
Name Value=[SETUP PATH]\uninstall
Type=REG_SZ