traffic.tan.summary

１．设计目的 （１）设计交通灯控制器； （２）学习状态机的设计方法； （３）学习原理图、状态机等多种的设计方法进行混合设计； （４）熟练掌握器件设计输入、编译、仿真和编程的过程。 ２．设计内

--------------------------------------------------------------------------------------
Timing Analyzer Summary
--------------------------------------------------------------------------------------

Type           : Worst-case tsu
Slack          : N/A
Required Time  : None
Actual Time    : 3.688 ns
From           : esp
To             : state.A
From Clock     : --
To Clock       : clk
Failed Paths   : 0

Type           : Worst-case tco
Slack          : N/A
Required Time  : None
Actual Time    : 5.756 ns
From           : lightG[1]~reg0
To             : lightG[1]
From Clock     : clk
To Clock       : --
Failed Paths   : 0

Type           : Worst-case th
Slack          : N/A
Required Time  : None
Actual Time    : -3.235 ns
From           : esp
To             : lightY[1]~reg0
From Clock     : --
To Clock       : clk
Failed Paths   : 0

Type           : Clock Setup: 'clk'
Slack          : N/A
Required Time  : None
Actual Time    : Restricted to 405.19 MHz ( period = 2.468 ns )
From           : state.D
To             : lightY[1]~reg0
From Clock     : clk
To Clock       : clk
Failed Paths   : 0

Type           : Total number of failed paths
Slack          : 
Required Time  : 
Actual Time    : 
From           : 
To             : 
From Clock     : 
To Clock       : 
Failed Paths   : 0

--------------------------------------------------------------------------------------