count.fit.qmsg

模可变计数器,可实现模2模8模10模16,异步清零,模可变加减计数

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.1 Build 213 01/19/2006 Service Pack 1 SJ Full Version " "Info: Version 5.1 Build 213 01/19/2006 Service Pack 1 SJ Full Version" {  } {  } 0 0 "%1!s!" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Thu Nov 29 19:32:44 2007 " "Info: Processing started: Thu Nov 29 19:32:44 2007" {  } {  } 0 0 "Processing started: %1!s!" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off count -c count " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off count -c count" {  } {  } 0 0 "Command: %1!s!" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "count EP2C5T144C8 " "Info: Selected device EP2C5T144C8 for design \"count\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1 MHz " "Info: Assuming a global fmax requirement of 1 MHz" {  } {  } 0 0 "Assuming a global %1!s! requirement of %2!s!" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0 0 "Not setting a global %1!s! requirement" 0 0}  } {  } 0 0 "Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C5T144I8 " "Info: Device EP2C5T144I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8T144C8 " "Info: Device EP2C8T144C8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C8T144I8 " "Info: Device EP2C8T144I8 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Info: Starting register packing" {  } {  } 0 0 "Starting register packing" 0 0}
{ "Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Info: Performing register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Performing register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Info: Completed register packing on registers with non-logic cell location assignments" {  } {  } 0 0 "Completed register packing on registers with non-logic cell location assignments" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Info: Started Fast Input/Output/OE register processing" {  } {  } 0 0 "Started Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Info: Finished Fast Input/Output/OE register processing" {  } {  } 0 0 "Finished Fast Input/Output/OE register processing" 0 0}
{ "Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Info: Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" {  } {  } 0 0 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 0 0}
{ "Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Info: Finished register packing" {  } {  } 0 0 "Finished register packing" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_AUTO_MODE_REGISTER_PACKING" "Auto Normal " "Info: Fitter is using Normal packing mode for logic elements with Auto setting for Auto Packed Registers logic option" {  } {  } 0 0 "Fitter is using %2!s! packing mode for logic elements with %1!s! setting for Auto Packed Registers logic option" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Info: Fitter placement operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "2.611 ns register register " "Info: Estimated most critical path is register to register delay of 2.611 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns iq\[3\] 1 REG LAB_X2_Y4 3 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = LAB_X2_Y4; Fanout = 3; REG Node = 'iq\[3\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "" { iq[3] } "NODE_NAME" } "" } } { "count.vhd" "" { Text "D:/count/count.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.230 ns) + CELL(0.651 ns) 0.881 ns iq\[2\]~2607 2 COMB LAB_X2_Y4 1 " "Info: 2: + IC(0.230 ns) + CELL(0.651 ns) = 0.881 ns; Loc. = LAB_X2_Y4; Fanout = 1; COMB Node = 'iq\[2\]~2607'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "0.881 ns" { iq[3] iq[2]~2607 } "NODE_NAME" } "" } } { "count.vhd" "" { Text "D:/count/count.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.187 ns) + CELL(0.624 ns) 1.692 ns iq\[2\]~2609 3 COMB LAB_X2_Y4 2 " "Info: 3: + IC(0.187 ns) + CELL(0.624 ns) = 1.692 ns; Loc. = LAB_X2_Y4; Fanout = 2; COMB Node = 'iq\[2\]~2609'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "0.811 ns" { iq[2]~2607 iq[2]~2609 } "NODE_NAME" } "" } } { "count.vhd" "" { Text "D:/count/count.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.187 ns) + CELL(0.624 ns) 2.503 ns iq~2610 4 COMB LAB_X2_Y4 1 " "Info: 4: + IC(0.187 ns) + CELL(0.624 ns) = 2.503 ns; Loc. = LAB_X2_Y4; Fanout = 1; COMB Node = 'iq~2610'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "0.811 ns" { iq[2]~2609 iq~2610 } "NODE_NAME" } "" } } { "count.vhd" "" { Text "D:/count/count.vhd" 9 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.108 ns) 2.611 ns iq\[2\] 5 REG LAB_X2_Y4 5 " "Info: 5: + IC(0.000 ns) + CELL(0.108 ns) = 2.611 ns; Loc. = LAB_X2_Y4; Fanout = 5; REG Node = 'iq\[2\]'" {  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "0.108 ns" { iq~2610 iq[2] } "NODE_NAME" } "" } } { "count.vhd" "" { Text "D:/count/count.vhd" 15 -1 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "2.007 ns ( 76.87 % ) " "Info: Total cell delay = 2.007 ns ( 76.87 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0} { "Info" "ITDB_TOTAL_IC_DELAY" "0.604 ns ( 23.13 % ) " "Info: Total interconnect delay = 0.604 ns ( 23.13 % )" {  } {  } 0 0 "Total interconnect delay = %1!s! %2!s!" 0 0}  } { { "c:/altera/quartus51/bin/Report_Window_01.qrpt" "" { Report "c:/altera/quartus51/bin/Report_Window_01.qrpt" "Compiler" "count" "UNKNOWN" "V1" "D:/count/db/count.quartus_db" { Floorplan "D:/count/" "" "2.611 ns" { iq[3] iq[2]~2607 iq[2]~2609 iq~2610 iq[2] } "NODE_NAME" } "" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 0 " "Info: Average interconnect usage is 0% of the available device resources. Peak interconnect usage is 0%" {  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Warning" "WDAT_PRELIMINARY_TIMING" "EP2C5T144C8 " "Warning: Timing characteristics of device EP2C5T144C8 are preliminary" {  } {  } 0 0 "Timing characteristics of device %1!s! are preliminary" 0 0}
{ "Warning" "WDAT_NO_LOADING_SPECIFIED_ONE_OR_MORE_PINS" "4 " "Warning: Found 4 output pins without output pin load capacitance assignment" { { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "q3 0 " "Warning: Pin \"q3\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "q2 0 " "Warning: Pin \"q2\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "q1 0 " "Warning: Pin \"q1\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0} { "Warning" "WDAT_NO_LOADING_SPECIFIED_ON_PIN" "q0 0 " "Warning: Pin \"q0\" has no specified output pin load capacitance -- assuming default load capacitance of 0 pF for timing analysis" {  } {  } 0 0 "Pin \"%1!s!\" has no specified output pin load capacitance -- assuming default load capacitance of %2!d! pF for timing analysis" 0 0}  } {  } 0 0 "Found %1!d! output pins without output pin load capacitance assignment" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Thu Nov 29 19:32:47 2007 " "Info: Processing ended: Thu Nov 29 19:32:47 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}