project1.map.rpt

FPGA DS18B20 测试温度 VHDL源码

;    |lpm_counter:num_rtl_0|             ; 15 (0)      ; 14           ; 0           ; 0    ; 1 (0)        ; 0 (0)             ; 14 (0)           ; 14 (0)          ; 0 (0)      ; |Project1|lpm_counter:num_rtl_0                                      ;
;       |alt_counter_f10ke:wysi_counter| ; 15 (15)     ; 14           ; 0           ; 0    ; 1 (1)        ; 0 (0)             ; 14 (14)          ; 14 (14)         ; 0 (0)      ; |Project1|lpm_counter:num_rtl_0|alt_counter_f10ke:wysi_counter       ;
+----------------------------------------+-------------+--------------+-------------+------+--------------+-------------------+------------------+-----------------+------------+----------------------------------------------------------------------+
Note: For table entries with two numbers listed, the numbers in parentheses indicate the number of resources of the given type used by the specific entity alone. The numbers listed outside of parentheses indicate the total resources of the given type used by the specific entity and all of its sub-entities in the hierarchy.


+------------------------------------------------------+
; General Register Statistics                          ;
+----------------------------------------------+-------+
; Statistic                                    ; Value ;
+----------------------------------------------+-------+
; Total registers                              ; 55    ;
; Number of registers using Synchronous Clear  ; 28    ;
; Number of registers using Synchronous Load   ; 0     ;
; Number of registers using Asynchronous Clear ; 0     ;
; Number of registers using Asynchronous Load  ; 0     ;
; Number of registers using Clock Enable       ; 28    ;
; Number of registers using Preset             ; 0     ;
+----------------------------------------------+-------+


+----------------------------------------------------+
; Source assignments for Top-level Entity: |project1 ;
+----------------+-------+------+--------------------+
; Assignment     ; Value ; From ; To                 ;
+----------------+-------+------+--------------------+
; POWER_UP_LEVEL ; Low   ; -    ; DQ~en              ;
+----------------+-------+------+--------------------+


+------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:num_rtl_0 ;
+------------------------+-------------------+---------------------------+
; Parameter Name         ; Value             ; Type                      ;
+------------------------+-------------------+---------------------------+
; AUTO_CARRY_CHAINS      ; ON                ; AUTO_CARRY                ;
; IGNORE_CARRY_BUFFERS   ; OFF               ; IGNORE_CARRY              ;
; AUTO_CASCADE_CHAINS    ; ON                ; AUTO_CASCADE              ;
; IGNORE_CASCADE_BUFFERS ; OFF               ; IGNORE_CASCADE            ;
; LPM_WIDTH              ; 14                ; Untyped                   ;
; LPM_DIRECTION          ; UP                ; Untyped                   ;
; LPM_MODULUS            ; 0                 ; Untyped                   ;
; LPM_AVALUE             ; UNUSED            ; Untyped                   ;
; LPM_SVALUE             ; UNUSED            ; Untyped                   ;
; LPM_PORT_UPDOWN        ; PORT_CONNECTIVITY ; Untyped                   ;
; DEVICE_FAMILY          ; ACEX1K            ; Untyped                   ;
; CARRY_CHAIN            ; MANUAL            ; Untyped                   ;
; CARRY_CHAIN_LENGTH     ; 48                ; CARRY_CHAIN_LENGTH        ;
; NOT_GATE_PUSH_BACK     ; ON                ; NOT_GATE_PUSH_BACK        ;
; CARRY_CNT_EN           ; SMART             ; Untyped                   ;
; LABWIDE_SCLR           ; ON                ; Untyped                   ;
; USE_NEW_VERSION        ; TRUE              ; Untyped                   ;
; CBXI_PARAMETER         ; NOTHING           ; Untyped                   ;
+------------------------+-------------------+---------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".


+------------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:count_int_rtl_1 ;
+------------------------+-------------------+---------------------------------+
; Parameter Name         ; Value             ; Type                            ;
+------------------------+-------------------+---------------------------------+
; AUTO_CARRY_CHAINS      ; ON                ; AUTO_CARRY                      ;
; IGNORE_CARRY_BUFFERS   ; OFF               ; IGNORE_CARRY                    ;
; AUTO_CASCADE_CHAINS    ; ON                ; AUTO_CASCADE                    ;
; IGNORE_CASCADE_BUFFERS ; OFF               ; IGNORE_CASCADE                  ;
; LPM_WIDTH              ; 8                 ; Untyped                         ;
; LPM_DIRECTION          ; UP                ; Untyped                         ;
; LPM_MODULUS            ; 0                 ; Untyped                         ;
; LPM_AVALUE             ; UNUSED            ; Untyped                         ;
; LPM_SVALUE             ; UNUSED            ; Untyped                         ;
; LPM_PORT_UPDOWN        ; PORT_CONNECTIVITY ; Untyped                         ;
; DEVICE_FAMILY          ; ACEX1K            ; Untyped                         ;
; CARRY_CHAIN            ; MANUAL            ; Untyped                         ;
; CARRY_CHAIN_LENGTH     ; 48                ; CARRY_CHAIN_LENGTH              ;
; NOT_GATE_PUSH_BACK     ; ON                ; NOT_GATE_PUSH_BACK              ;
; CARRY_CNT_EN           ; SMART             ; Untyped                         ;
; LABWIDE_SCLR           ; ON                ; Untyped                         ;
; USE_NEW_VERSION        ; TRUE              ; Untyped                         ;
; CBXI_PARAMETER         ; NOTHING           ; Untyped                         ;
+------------------------+-------------------+---------------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".


+------------------------------------------------------------------------+
; Parameter Settings for Inferred Entity Instance: lpm_counter:fen_rtl_2 ;
+------------------------+-------------------+---------------------------+
; Parameter Name         ; Value             ; Type                      ;
+------------------------+-------------------+---------------------------+
; AUTO_CARRY_CHAINS      ; ON                ; AUTO_CARRY                ;
; IGNORE_CARRY_BUFFERS   ; OFF               ; IGNORE_CARRY              ;
; AUTO_CASCADE_CHAINS    ; ON                ; AUTO_CASCADE              ;
; IGNORE_CASCADE_BUFFERS ; OFF               ; IGNORE_CASCADE            ;
; LPM_WIDTH              ; 6                 ; Untyped                   ;
; LPM_DIRECTION          ; UP                ; Untyped                   ;
; LPM_MODULUS            ; 0                 ; Untyped                   ;
; LPM_AVALUE             ; UNUSED            ; Untyped                   ;
; LPM_SVALUE             ; UNUSED            ; Untyped                   ;
; LPM_PORT_UPDOWN        ; PORT_CONNECTIVITY ; Untyped                   ;
; DEVICE_FAMILY          ; ACEX1K            ; Untyped                   ;
; CARRY_CHAIN            ; MANUAL            ; Untyped                   ;
; CARRY_CHAIN_LENGTH     ; 48                ; CARRY_CHAIN_LENGTH        ;
; NOT_GATE_PUSH_BACK     ; ON                ; NOT_GATE_PUSH_BACK        ;
; CARRY_CNT_EN           ; SMART             ; Untyped                   ;
; LABWIDE_SCLR           ; ON                ; Untyped                   ;
; USE_NEW_VERSION        ; TRUE              ; Untyped                   ;
; CBXI_PARAMETER         ; NOTHING           ; Untyped                   ;
+------------------------+-------------------+---------------------------+
Note: In order to hide this table in the UI and the text report file, please set the "Show Parameter Settings Tables in Synthesis Report" option in "Analysis and Synthesis Settings -> More Settings" to "Off".


+-------------------------------+
; Analysis & Synthesis Messages ;
+-------------------------------+
Info: *******************************************************************
Info: Running Quartus II Analysis & Synthesis
    Info: Version 6.0 Build 178 04/27/2006 SJ Full Version
    Info: Processing started: Thu Sep 20 15:32:16 2007
Info: Command: quartus_map --read_settings_files=on --write_settings_files=off project1 -c project1
Info: Found 2 design units, including 1 entities, in source file project1.vhd
    Info: Found design unit 1: Project1-block_name_architecture
    Info: Found entity 1: Project1
Info: Elaborating entity "project1" for the top level hierarchy
Warning: Reduced register "DQ~reg0" with stuck data_in port to stuck value GND
Info: Inferred 3 megafunctions from design logic
    Info: Inferred lpm_counter megafunction (LPM_WIDTH=14) from the following logic: "num[0]~500"
    Info: Inferred lpm_counter megafunction (LPM_WIDTH=8) from the following logic: "count_int[0]~16"
    Info: Inferred lpm_counter megafunction (LPM_WIDTH=6) from the following logic: "fen[0]~6"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/lpm_counter.tdf
    Info: Found entity 1: lpm_counter
Info: Elaborated megafunction instantiation "lpm_counter:num_rtl_0"
Info: Found 1 design units, including 1 entities, in source file c:/altera/quartus60/libraries/megafunctions/alt_counter_f10ke.tdf
    Info: Found entity 1: alt_counter_f10ke
Info: Elaborated megafunction instantiation "lpm_counter:num_rtl_0|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:num_rtl_0"
Info: Instantiated megafunction "lpm_counter:num_rtl_0" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "14"
    Info: Parameter "LPM_DIRECTION" = "UP"
    Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Info: Elaborated megafunction instantiation "lpm_counter:count_int_rtl_1"
Info: Elaborated megafunction instantiation "lpm_counter:count_int_rtl_1|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:count_int_rtl_1"
Info: Instantiated megafunction "lpm_counter:count_int_rtl_1" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "8"
    Info: Parameter "LPM_DIRECTION" = "UP"
    Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Info: Elaborated megafunction instantiation "lpm_counter:fen_rtl_2"
Info: Elaborated megafunction instantiation "lpm_counter:fen_rtl_2|alt_counter_f10ke:wysi_counter", which is child of megafunction instantiation "lpm_counter:fen_rtl_2"
Info: Instantiated megafunction "lpm_counter:fen_rtl_2" with the following parameter:
    Info: Parameter "LPM_WIDTH" = "6"
    Info: Parameter "LPM_DIRECTION" = "UP"
    Info: Parameter "LPM_TYPE" = "LPM_COUNTER"
Info: Implemented 206 device resources after synthesis - the final resource count might be different
    Info: Implemented 1 input pins
    Info: Implemented 13 output pins
    Info: Implemented 1 bidirectional pins
    Info: Implemented 191 logic cells
Info: Quartus II Analysis & Synthesis was successful. 0 errors, 1 warning
    Info: Processing ended: Thu Sep 20 15:32:36 2007
    Info: Elapsed time: 00:00:22