📄 evm5502_cpld.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCCINT : Dedicated power pin, which MUST be connected to VCC (3.3V).
-- VCCIO : Dedicated power pin, which MUST be connected to VCC (Refer to
-- the table below for voltage).
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.0 Build 214 3/25/2004 Service Pack 1 SJ Full Version
CHIP "EVM5502_CPLD" ASSIGNED TO AN: EPM3064ATC100-10
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
NC : 1 : : : : :
NC : 2 : : : : :
VCCIO : 3 : power : : 3.3V : :
TDI : 4 : input : LVTTL : : : N
NC : 5 : : : : :
am29_aoe : 6 : output : LVTTL : : : Y
NC : 7 : : : : :
am29_ce : 8 : output : LVTTL : : : Y
RESERVED_INPUT : 9 : : : : :
RESERVED_INPUT : 10 : : : : :
GND : 11 : gnd : : : :
RESERVED_INPUT : 12 : : : : :
RESERVED_INPUT : 13 : : : : :
RESERVED_INPUT : 14 : : : : :
TMS : 15 : input : LVTTL : : : N
RESERVED_INPUT : 16 : : : : :
RESERVED_INPUT : 17 : : : : :
VCCIO : 18 : power : : 3.3V : :
RESERVED_INPUT : 19 : : : : :
RESERVED_INPUT : 20 : : : : :
RESERVED_INPUT : 21 : : : : :
NC : 22 : : : : :
RESERVED_INPUT : 23 : : : : :
NC : 24 : : : : :
RESERVED_INPUT : 25 : : : : :
GND : 26 : gnd : : : :
NC : 27 : : : : :
NC : 28 : : : : :
RESERVED_INPUT : 29 : : : : :
RESERVED_INPUT : 30 : : : : :
RESERVED_INPUT : 31 : : : : :
RESERVED_INPUT : 32 : : : : :
GND : 33 : gnd : : : :
VCCIO : 34 : power : : 3.3V : :
RESERVED_INPUT : 35 : : : : :
RESERVED_INPUT : 36 : : : : :
RESERVED_INPUT : 37 : : : : :
GND : 38 : gnd : : : :
VCCINT : 39 : power : : 3.3V : :
dsp_aoe : 40 : input : LVTTL : : : Y
dsp_awe : 41 : input : LVTTL : : : Y
RESERVED_INPUT : 42 : : : : :
GND : 43 : gnd : : : :
dsp_ce : 44 : input : LVTTL : : : Y
RESERVED_INPUT : 45 : : : : :
RESERVED_INPUT : 46 : : : : :
RESERVED_INPUT : 47 : : : : :
RESERVED_INPUT : 48 : : : : :
NC : 49 : : : : :
NC : 50 : : : : :
VCCIO : 51 : power : : 3.3V : :
RESERVED_INPUT : 52 : : : : :
GND : 53 : gnd : : : :
RESERVED_INPUT : 54 : : : : :
NC : 55 : : : : :
RESERVED_INPUT : 56 : : : : :
RESERVED_INPUT : 57 : : : : :
RESERVED_INPUT : 58 : : : : :
GND : 59 : gnd : : : :
RESERVED_INPUT : 60 : : : : :
RESERVED_INPUT : 61 : : : : :
TCK : 62 : input : LVTTL : : : N
led_3 : 63 : output : LVTTL : : : Y
RESERVED_INPUT : 64 : : : : :
GND : 65 : gnd : : : :
VCCIO : 66 : power : : 3.3V : :
RESERVED_INPUT : 67 : : : : :
RESERVED_INPUT : 68 : : : : :
RESERVED_INPUT : 69 : : : : :
NC : 70 : : : : :
RESERVED_INPUT : 71 : : : : :
NC : 72 : : : : :
TDO : 73 : output : LVTTL : : : N
GND : 74 : gnd : : : :
RESERVED_INPUT : 75 : : : : :
led_2 : 76 : output : LVTTL : : : Y
NC : 77 : : : : :
GND : 78 : gnd : : : :
led_1 : 79 : output : LVTTL : : : Y
RESERVED_INPUT : 80 : : : : :
RESERVED_INPUT : 81 : : : : :
VCCIO : 82 : power : : 3.3V : :
RESERVED_INPUT : 83 : : : : :
cry_in : 84 : input : LVTTL : : : Y
clk_out : 85 : output : LVTTL : : : Y
GND : 86 : gnd : : : :
clk : 87 : input : LVTTL : : : Y
GND+ : 88 : : : : :
GND+ : 89 : : : : :
GND+ : 90 : : : : :
VCCINT : 91 : power : : 3.3V : :
am29_awe : 92 : output : LVTTL : : : Y
am29_busy1 : 93 : input : LVTTL : : : Y
am29_busy2 : 94 : input : LVTTL : : : Y
GND : 95 : gnd : : : :
RESERVED_INPUT : 96 : : : : :
RESERVED_INPUT : 97 : : : : :
dsp_Am29Ready : 98 : output : LVTTL : : : Y
RESERVED_INPUT : 99 : : : : :
RESERVED_INPUT : 100 : : : : :
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -