uartio.asm

ADI公司的产品aduc824单片机的ADC转换程序

;********************************************************************
;
; Author        : ADI - Apps            www.analog.com/MicroConverter
;
; Date          : 12 October 1999
;
; File          : UARTIO.hex
;
; Hardware      : any 8051 based microcontroller or MicroConverter
;
; Description   : standard UART I/O subroutines.  total size of this
;                 code when assembled is 155 bytes.  routines for use
;                 external to this file are:
;
;                 SENDSTRING - sends a string of characters
;                 SENDCHAR   - sends a single character
;                 SENDVAL    - sends a byte as 2 ASCII characters
;                 HEX2ASCII  - converts from HEX to ASCII
;                 ASCII2HEX  - converts from ASCII to HEX
;                 GETCHAR    - gets a single character
;                 GETVAL     - gets a byte as 2 ASCII characters
;
;********************************************************************

;____________________________________________________________________
                                                         ; SENDSTRING

SENDSTRING:     ; sends ASCII string to UART starting at location
                ; DPTR and ending with a null (0) value

        PUSH    ACC
        PUSH    B
        CLR     A
        MOV     B,A
IO0010: MOV     A,B
        INC     B
        MOVC    A,@A+DPTR
        JZ      IO0020
        CALL    SENDCHAR
        JMP     IO0010
IO0020: POP     B
        POP     ACC

        RET

;____________________________________________________________________
                                                           ; SENDCHAR

SENDCHAR:       ; sends ASCII value contained in A to UART

        JNB     TI,$            ; wait til present char gone
        CLR     TI              ; must clear TI
        MOV     SBUF,A

        RET

;____________________________________________________________________
                                                            ; SENDVAL

SENDVAL:        ; converts the hex value of A into two ASCII chars,
		; and then spits these two characters up the UART.
                ; does not change the value of A.

        PUSH    ACC
        SWAP    A
        CALL    HEX2ASCII
        CALL    SENDCHAR        ; send high nibble
        POP     ACC
        PUSH    ACC
        CALL    HEX2ASCII
        CALL    SENDCHAR        ; send low nibble
        POP     ACC

        RET

;____________________________________________________________________
                                                          ; HEX2ASCII

HEX2ASCII:      ; converts A into the hex character representing the
                ; value of A's least significant nibble

        ANL     A,#00Fh
        CJNE    A,#00Ah,$+3
        JC      IO0030
        ADD     A,#007h
IO0030: ADD     A,#'0'

        RET

;____________________________________________________________________
                                                          ; ASCII2HEX

ASCII2HEX:      ; converts A from an ASCII digit ('0'-'9' or 'A'-'F')
                ; into the corresponding number (0-15).  returns C=1
                ; when input is other than an ASCII digit,
                ; indicating invalid output (returned as 255).

        CLR     C
        SUBB    A,#'0'
        CJNE    A,#10,$+3
        JC      IO0050          ; if '0'<=char<='9', return OK
        CJNE    A,#17,$+3
        JC      IO0040          ; if '9'<char<'A', return FAIL
        SUBB    A,#7
        CJNE    A,#10h,$+3
        JC      IO0050          ; if 'A'<=char<='F', return OK
        CJNE    A,#42,$+3
        JC      IO0040          ; if 'F'<char<'a', return FAIL
        SUBB    A,#20h
        CJNE    A,#10h,$+3
        JC      IO0050          ; if 'a'<=char<='f', return OK..

IO0040: CLR     C               ; ..else return FAIL
        MOV     A,#0FFh

IO0050: CPL     C
        RET

;____________________________________________________________________
                                                            ; GETCHAR

GETCHAR:        ; waits for a single ASCII character to be received
                ; by the UART.  places this character into A.

        JNB     RI,$
        MOV     A,SBUF
        CLR     RI

        RET

;____________________________________________________________________
                                                             ; GETVAL

GETVAL:         ; waits for two ASCII hex digits to be received by
                ; the UART.  returns the hex value in A.

        PUSH    B
        PUSH    0
IO0060: CLR     RI
        CALL    GETCHAR         ; first nibble
        MOV     0,A             ; store received char
        CALL    ASCII2HEX
        JC      IO0060          ; if not '0' thru 'F', don't accept
        SWAP    A               ; swap nibbles
        MOV     B,A             ; store nibble in B
        MOV     A,0             ; echo received char
        CALL    SENDCHAR
IO0070: CLR     RI
        CALL    GETCHAR         ; second nibble
        MOV     0,A             ; store received char
        CALL    ASCII2HEX
        JC      IO0070          ; if not '0' thru 'F', don't accept
        ORL     A,B             ; combine nibbles
        MOV     B,A             ; store results in B
        MOV     A,0             ; echo received char
        CALL    SENDCHAR
        MOV     A,B             ; final result
        POP     0
        POP     B

        RET