📄 kongceshi2.pin
字号:
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
N.C. = No Connect. This pin has no internal connection to the device.
VCCINT = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
VCCIO = Dedicated power pin, which MUST be connected to VCC (5.0 volts).
GNDINT = Dedicated ground pin or unused dedicated input, which MUST be connected to GND.
GNDIO = Dedicated ground pin, which MUST be connected to GND.
RESERVED = Unused I/O pin, which MUST be left unconnected.
----------------------------------------------------------------------------
CHIP "kongceshi2" ASSIGNED TO AN EPF10K10LC84-3
CLK : 1
CLR : 2
T2 : 3
VCCINT : 4
161PC : 5
RESERVED : 6
T4 : 7
RESERVED : 8
ALU_BUS : 9
WE : 10
RESERVED : 11
DATA0 : 12
DCLK : 13
nCE : 14
TDI : 15
A2 : 16
S3 : 17
161LOAD : 18
PC_BUS : 19
VCCINT : 20
RESERVED : 21
T1 : 22
P3 : 23
S0 : 24
LDIR : 25
GNDINT : 26
DAT3 : 27
DAT0 : 28
DAT1 : 29
R2 : 30
MSEL0 : 31
MSEL1 : 32
VCCINT : 33
nCONFIG : 34
SW_BUS : 35
A3 : 36
R1 : 37
R0 : 38
S2 : 39
VCCINT : 40
GNDINT : 41
R7 : 42
TJ : 43
R6 : 44
VCCINT : 45
GNDINT : 46
A1 : 47
SELRI : 48
RESERVED : 49
RESERVED : 50
MUL : 51
LDRI : 52
LDDR1 : 53
LDAR : 54
nSTATUS : 55
TRST : 56
TMS : 57
P1 : 58
R3 : 59
R4 : 60
R5 : 61
DAT2 : 62
VCCINT : 63
DP : 64
T3 : 65
LDDR2 : 66
M : 67
GNDINT : 68
A0 : 69
S1 : 70
A4 : 71
A5 : 72
CN : 73
TDO : 74
nCEO : 75
CONF_DONE : 76
TCK : 77
161CLRN : 78
P2 : 79
RESERVED : 80
RD : 81
GNDINT : 82
RI_BUS : 83
QD : 84
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -