print3.fit

用VHDL编写的简单POC（并行输出控制）程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 03/27/2007 20:57:18      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "print3"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "B0"                           : INPUT_PIN  = 44     ;
    "B1"                           : INPUT_PIN  = 84     ;
    "B2"                           : INPUT_PIN  = 43     ;
    "B3"                           : INPUT_PIN  = 66     ;
    "B4"                           : INPUT_PIN  = 21     ;
    "B5"                           : INPUT_PIN  = 51     ;
    "B6"                           : INPUT_PIN  = 22     ;
    "B7"                           : INPUT_PIN  = 53     ;
    "CLK"                          : INPUT_PIN  = 1      ;
    "RESET"                        : INPUT_PIN  = 2      ;
    "TR"                           : INPUT_PIN  = 42     ;
    "D10"                          : OUTPUT_PIN = 48     ;
    "D11"                          : OUTPUT_PIN = 65     ;
    "D12"                          : OUTPUT_PIN = 67     ;
    "D13"                          : OUTPUT_PIN = 64     ;
    "D14"                          : OUTPUT_PIN = 25     ;
    "D15"                          : OUTPUT_PIN = 49     ;
    "D16"                          : OUTPUT_PIN = 23     ;
    "D17"                          : OUTPUT_PIN = 24     ;
    "RDY"                          : OUTPUT_PIN = 83     ;
    "PRINT~1"                      : LOCATION   = LC7_B14;
    "RESET~1"                      : LOCATION   = LC1_B21;
    ":1"                           : LOCATION   = LC2_B14;
    ":14"                          : LOCATION   = LC5_B16;
    ":16"                          : LOCATION   = LC3_B16;
    ":18"                          : LOCATION   = LC4_B16;
    ":20"                          : LOCATION   = LC7_B16;
    ":22"                          : LOCATION   = LC6_B16;
    ":24"                          : LOCATION   = LC1_B16;
    ":26"                          : LOCATION   = LC8_B16;
    ":28"                          : LOCATION   = LC2_B16;
    ":30"                          : LOCATION   = LC5_B14;  -- COUNT1
    ":31"                          : LOCATION   = LC6_B14;  -- COUNT0
    ":234"                         : LOCATION   = LC3_B14;
    ":255"                         : LOCATION   = LC8_B14;
    "~332~1"                       : LOCATION   = LC1_B14;
    ":359"                         : LOCATION   = LC4_B14;

END;

INTERNAL_INFO "print3"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD2P44  : LORAX = "1:FB2|2:FH2R1,PA6R1C15->LC2_B16||";
    OD0P84  : LORAX = "1:FB0|2:FH0R1,PA0R1C15->LC8_B16||";
    OD5P43  : LORAX = "1:FB5|2:CH1R1,PA7R1C15->LC1_B16||";
    OH2R1P66 : LORAX = "1:G46R1,PA4R1C15->LC6_B16|";
    OH8R1P21 : LORAX = "1:G95R1,PA3R1C15->LC7_B16|";
    OV2C17P51 : LORAX = "1:V14C17,HHR30R1,PA5R1C15->LC4_B16|";
    OH9R1P22 : LORAX = "1:G43R1,PA16R1C15->LC3_B16|";
    OV2C19P53 : LORAX = "1:V14C19,HHR36R1,PA20R1C15->LC5_B16|";
    OD4P1   : LORAX = "1:FB4->LC7_B14,->LC2_B14,->LC5_B16,->LC3_B16,->LC4_B16,->LC7_B16,->LC6_B16,->LC1_B16,->LC8_B16,->LC2_B16,->LC5_B14,->LC6_B14|";
    OD1P2   : LORAX = "1:FB1->LC7_B14|2:FH1R1,PA20R1C20->LC1_B21||";
    LC1_B21 : LORAX = "1:MSW0R1C20,HHR21R1|2:PA15R1C13->LC2_B14,->LC5_B14,->LC6_B14|,2:PA15R1C15->LC5_B16,->LC3_B16,->LC4_B16,->LC7_B16,->LC6_B16,->LC1_B16,->LC8_B16,->LC2_B16||";
    OD3P42  : LORAX = "1:FB3|2:FH3R1,PA5R1C13->LC7_B14,->LC2_B14||";
    LC2_B14 : LORAX = "1:MSW2R1C12,V6C12->OV1C12P83|";
    LC5_B16 : LORAX = "1:MSW5R1C14,G57R1->OH13R1P24|";
    LC3_B16 : LORAX = "1:MSW3R1C14,G23R1->OH11R1P23|";
    LC4_B16 : LORAX = "1:MSW3R1C15,V11C15->OV3C15P49|";
    LC7_B16 : LORAX = "1:MSW7R1C14,G52R1->OH15R1P25|";
    LC6_B16 : LORAX = "1:MSW6R1C14,HHR40R1->OH6R1P64|";
    LC1_B16 : LORAX = "1:MSW0R1C15,HHR19R1->OH0R1P67|";
    LC8_B16 : LORAX = "1:MSW4R1C14,HHR43R1->OH4R1P65|";
    LC2_B16 : LORAX = "1:MSW2R1C14,V8C14->OV3C14P48|";
    LC1_B14 : LORAX = "1:MSW1R1C12,HHR8R1,PA14R1C15->LC5_B16,->LC3_B16,->LC4_B16,->LC7_B16,->LC6_B16,->LC1_B16,->LC8_B16,->LC2_B16|";
	LC7_B14 : LORAX2 = "OD3P42, LC5_B14, LC6_B14, LC7_B14";
	LC1_B21 : LORAX2 = "X, X, X, OD1P2";
	LC2_B14 : LORAX2 = "LC1_B21, OD3P42, LC8_B14, LC7_B14";
	LC5_B16 : LORAX2 = "LC1_B21, OV2C19P53, LC5_B16, LC1_B14";
	LC3_B16 : LORAX2 = "LC1_B21, OH9R1P22, LC3_B16, LC1_B14";
	LC4_B16 : LORAX2 = "LC1_B21, OV2C17P51, LC4_B16, LC1_B14";
	LC7_B16 : LORAX2 = "LC1_B21, OH8R1P21, LC7_B16, LC1_B14";
	LC6_B16 : LORAX2 = "LC1_B21, OH2R1P66, LC6_B16, LC1_B14";
	LC1_B16 : LORAX2 = "LC1_B21, OD5P43, LC1_B16, LC1_B14";
	LC8_B16 : LORAX2 = "LC1_B21, OD0P84, LC8_B16, LC1_B14";
	LC2_B16 : LORAX2 = "LC1_B21, OD2P44, LC2_B16, LC1_B14";
	LC5_B14 : LORAX2 = "LC1_B21, X, LC4_B14, LC3_B14";
	LC6_B14 : LORAX2 = "LC1_B21, LC4_B14, LC2_B14, LC6_B14";
	LC3_B14 : LORAX2 = "X, LC2_B14, LC5_B14, LC6_B14";
	LC8_B14 : LORAX2 = "X, LC2_B14, LC6_B14, LC5_B14";
	LC1_B14 : LORAX2 = "X, LC6_B14, LC5_B14, LC7_B14";
	LC4_B14 : LORAX2 = "X, LC6_B14, LC5_B14, LC7_B14";
END;