📄 7064.pin
字号:
-- Copyright (C) 1991-2004 Altera Corporation
-- Any megafunction design, and related netlist (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only
-- to program PLD devices (but not masked PLD devices) from Altera. Any
-- other use of such megafunction design, netlist, support information,
-- device programming or simulation file, or any other related documentation
-- or information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to the
-- intellectual property, including patents, copyrights, trademarks, trade
-- secrets, or maskworks, embodied in any such megafunction design, netlist,
-- support information, device programming or simulation file, or any other
-- related documentation or information provided by Altera or a megafunction
-- partner, remains with Altera, the megafunction partner, or their respective
-- licensors. No other licenses, including any licenses needed under any third
-- party's intellectual property, are provided herein.
--
-- This is a Quartus II output file. It is for reporting purposes only, and is
-- not intended for use as a Quartus II input file. This file cannot be used
-- to make Quartus II pin assignments - for instructions on how to make pin
-- assignments, please see Quartus II help.
---------------------------------------------------------------------------------
---------------------------------------------------------------------------------
-- NC : No Connect. This pin has no internal connection to the device.
-- VCC : Dedicated power pin, which MUST be connected to VCC.
-- VCCIO : Dedicated power pin, which MUST be connected to VCC
-- of its bank.
-- GND : Dedicated ground pin. Dedicated GND pins MUST be connected to GND.
-- It can also be used to report unused dedicated pins. The connection
-- on the board for unused dedicated pins depends on whether this will
-- be used in a future design. One example is device migration. When
-- using device migration, refer to the device pin-tables. If it is a
-- GND pin in the pin table or if it will not be used in a future design
-- for another purpose the it MUST be connected to GND. If it is an unused
-- dedicated pin, then it can be connected to a valid signal on the board
-- (low, high, or toggling) if that signal is required for a different
-- revision of the design.
-- GND+ : Unused input pin. It can also be used to report unused dual-purpose pins.
-- This pin should be connected to GND. It may also be connected to a
-- valid signal on the board (low, high, or toggling) if that signal
-- is required for a different revision of the design.
-- GND* : Unused I/O pin. This pin can either be left unconnected or
-- connected to GND. Connecting this pin to GND will improve the
-- device's immunity to noise.
-- RESERVED : Unused I/O pin, which MUST be left unconnected.
-- RESERVED_INPUT : Pin is tri-stated and should be connected to the board.
-- NON_MIGRATABLE: This pin cannot be migrated.
---------------------------------------------------------------------------------
Quartus II Version 4.2 Build 157 12/07/2004 SJ Full Version
CHIP "7064" ASSIGNED TO AN: EPM7128STC100-10
Pin Name/Usage : Location : Dir. : I/O Standard : Voltage : I/O Bank : User Assignment
-------------------------------------------------------------------------------------------------------------
LCLK : 1 : output : TTL : : : Y
CS : 2 : input : TTL : : : Y
VCCIO : 3 : power : : 5.0V : :
TDI : 4 : input : TTL : : : N
OE429[5] : 5 : output : TTL : : : Y
OE429[4] : 6 : output : TTL : : : Y
RDY[2] : 7 : input : TTL : : : Y
RDY[3] : 8 : input : TTL : : : Y
CARL[2] : 9 : input : TTL : : : Y
CARL[3] : 10 : input : TTL : : : Y
GND : 11 : gnd : : : :
CARL[1] : 12 : input : TTL : : : Y
CARL[0] : 13 : input : TTL : : : Y
IRQ : 14 : output : TTL : : : Y
TMS : 15 : input : TTL : : : N
D[10] : 16 : bidir : TTL : : : Y
D[9] : 17 : bidir : TTL : : : Y
VCCIO : 18 : power : : 5.0V : :
D[8] : 19 : bidir : TTL : : : Y
D[7] : 20 : bidir : TTL : : : Y
D[6] : 21 : bidir : TTL : : : Y
D[5] : 22 : bidir : TTL : : : Y
D[4] : 23 : bidir : TTL : : : Y
D[3] : 24 : bidir : TTL : : : Y
D[2] : 25 : bidir : TTL : : : Y
GND : 26 : gnd : : : :
D[1] : 27 : bidir : TTL : : : Y
D[0] : 28 : bidir : TTL : : : Y
WR : 29 : input : TTL : : : Y
OE : 30 : input : TTL : : : Y
CS429 : 31 : input : TTL : : : Y
A[1] : 32 : input : TTL : : : Y
A[2] : 33 : input : TTL : : : Y
VCCIO : 34 : power : : 5.0V : :
A[3] : 35 : input : TTL : : : Y
A[4] : 36 : input : TTL : : : Y
A[5] : 37 : input : TTL : : : Y
GND : 38 : gnd : : : :
VCCINT : 39 : power : : 5.0V : :
RESERVED : 40 : : : : :
RESERVED : 41 : : : : :
RESERVED : 42 : : : : :
GND : 43 : gnd : : : :
RESERVED : 44 : : : : :
RESERVED : 45 : : : : :
CRST : 46 : input : TTL : : : Y
RESERVED : 47 : : : : :
RESERVED : 48 : : : : :
RESERVED : 49 : : : : :
LRST : 50 : input : TTL : : : Y
VCCIO : 51 : power : : 5.0V : :
RESERVED : 52 : : : : :
RESERVED : 53 : : : : :
RESERVED : 54 : : : : :
RESERVED : 55 : : : : :
RESERVED : 56 : : : : :
RESERVED : 57 : : : : :
OE429[6] : 58 : output : TTL : : : Y
GND : 59 : gnd : : : :
OE429[7] : 60 : output : TTL : : : Y
RDY[1] : 61 : input : TTL : : : Y
TCK : 62 : input : TTL : : : N
RDY[0] : 63 : input : TTL : : : Y
RESERVED : 64 : : : : :
LD429[11] : 65 : output : TTL : : : Y
VCCIO : 66 : power : : 5.0V : :
LD429[9] : 67 : output : TTL : : : Y
LD429[10] : 68 : output : TTL : : : Y
OE429[1] : 69 : output : TTL : : : Y
OE429[0] : 70 : output : TTL : : : Y
RESERVED : 71 : : : : :
RESERVED : 72 : : : : :
TDO : 73 : output : TTL : : : N
GND : 74 : gnd : : : :
SEL : 75 : output : TTL : : : Y
RDY[5] : 76 : input : TTL : : : Y
OE429[3] : 77 : output : TTL : : : Y
OE429[2] : 78 : output : TTL : : : Y
LD429[8] : 79 : output : TTL : : : Y
LD429[7] : 80 : output : TTL : : : Y
LD429[6] : 81 : output : TTL : : : Y
VCCIO : 82 : power : : 5.0V : :
LD429[2] : 83 : output : TTL : : : Y
LD429[1] : 84 : output : TTL : : : Y
LD429[0] : 85 : output : TTL : : : Y
GND : 86 : gnd : : : :
CLK_IN : 87 : input : TTL : : : Y
GND+ : 88 : : : : :
GND+ : 89 : : : : :
GND+ : 90 : : : : :
VCCINT : 91 : power : : 5.0V : :
LD429[5] : 92 : output : TTL : : : Y
LD429[4] : 93 : output : TTL : : : Y
LD429[3] : 94 : output : TTL : : : Y
GND : 95 : gnd : : : :
RDY[4] : 96 : input : TTL : : : Y
CLK4292 : 97 : output : TTL : : : Y
CLK4291 : 98 : output : TTL : : : Y
RDY[7] : 99 : input : TTL : : : Y
RDY[6] : 100 : input : TTL : : : Y
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -