i2c.fit.talkback.xml

VHDL接口电路实用源程序

<!--
This XML file (created on Sat Jul 15 12:39:54 2006) contains limited information
from the compilation of logic designs using Quartus II software (BUT NOT THE
LOGIC DESIGN FILES) that will be transmitted to Altera Corporation through
operation of the "TalkBack" feature.  To enable/disable this feature, run
qtb_install.exe located in your quartus/bin folder.  For more information, go
to license.txt.
-->
<talkback>
<ver>5.0</ver>
<schema>quartus_version_5.0_build_148.xsd</schema><license>
	<nic_id>0007e977cc25</nic_id>
	<cdrive_id>bc32e9a1</cdrive_id>
</license>
<tool>
	<name>Quartus II</name>
	<version>5.0</version>
	<build>Build 148</build>
	<module>quartus_fit.exe</module>
	<edition>Full Version (Grace)</edition>
	<compilation_end_time>Sat Jul 15 12:39:54 2006</compilation_end_time>
</tool>
<machine>
	<os>Windows XP</os>
	<cpu>
		<proc_count>1</proc_count>
		<cpu_freq units="MHz">2392</cpu_freq>
	</cpu>
	<ram units="MB">512</ram>
</machine>
<top_file>G:/work_room/PLD/Mars-7128-S Altera CPLD开发板/示例程序/VHDL/接口实验/i2c总线/i2c</top_file>
<resource_usage_summary>
	<rsc name="Logic cells" util="98" max=" 128 " type="int">126 </rsc>
	<rsc name="Registers" util="54" max=" 128 " type="int">70 </rsc>
	<rsc name="Number of pterms used" type="int">431</rsc>
	<rsc name="User inserted logic elements" type="int">0</rsc>
	<rsc name="I/O pins" util="36" max=" 68 " type="int">25 </rsc>
	<rsc name="-- Clock pins" util="50" max=" 2 " type="int">1 </rsc>
	<rsc name="-- Dedicated input pins" util="50" max=" 2 " type="int">1 </rsc>
	<rsc name="Global signals" type="int">2</rsc>
	<rsc name="Shareable expanders" util="18" max=" 128 " type="int">24 </rsc>
	<rsc name="Parallel expanders" util="30" max=" 120 " type="int">36 </rsc>
	<rsc name="Cells using turbo bit" util="98" max=" 128 " type="int">126 </rsc>
	<rsc name="Maximum fan-out node" type="text">clk</rsc>
	<rsc name="Maximum fan-out" type="int">70</rsc>
	<rsc name="Total fan-out" type="int">1549</rsc>
	<rsc name="Average fan-out" type="float">8.85</rsc>
</resource_usage_summary>
<control_signals>
	<row>
		<name>clk</name>
		<location>PIN_83</location>
		<fan_out>70</fan_out>
		<usage>Clock</usage>
		<global>yes</global>
		<global_resource_used>On</global_resource_used>
	</row>
	<row>
		<name>rst</name>
		<location>PIN_1</location>
		<fan_out>70</fan_out>
		<usage>Async. clear</usage>
		<global>yes</global>
		<global_resource_used>On</global_resource_used>
	</row>
</control_signals>
<non_global_high_fan_out_signals>
	<row>
		<name>writeData_reg[3]</name>
		<fan_out>13</fan_out>
	</row>
	<row>
		<name>writeData_reg[1]</name>
		<fan_out>14</fan_out>
	</row>
	<row>
		<name>writeData_reg[2]</name>
		<fan_out>13</fan_out>
	</row>
	<row>
		<name>writeData_reg[0]</name>
		<fan_out>13</fan_out>
	</row>
	<row>
		<name>lpm_counter:cnt_scan_rtl_0|dffs[0]</name>
		<fan_out>24</fan_out>
	</row>
	<row>
		<name>lpm_counter:cnt_scan_rtl_0|dffs[1]</name>
		<fan_out>12</fan_out>
	</row>
	<row>
		<name>cnt_delay[19]</name>
		<fan_out>12</fan_out>
	</row>
	<row>
		<name>clk_div[1]</name>
		<fan_out>11</fan_out>
	</row>
	<row>
		<name>i2c_state[1]</name>
		<fan_out>52</fan_out>
	</row>
	<row>
		<name>lpm_counter:cnt_scan_rtl_0|dffs[2]</name>
		<fan_out>11</fan_out>
	</row>
</non_global_high_fan_out_signals>
<interconnect_usage_summary>
	<rsc name="Output enables" util="16" max=" 6 " type="int">1 </rsc>
	<rsc name="PIA buffers" util="68" max=" 288 " type="int">196 </rsc>
	<rsc name="PIAs" util="79" max=" 288 " type="int">229 </rsc>
</interconnect_usage_summary>
<mep_data>
	<command_line>quartus_fit --read_settings_files=off --write_settings_files=off i2c -c i2c</command_line>
</mep_data>
<software_data>
	<smart_recompile>off</smart_recompile>
</software_data>
<fitter_settings>
	<row>
		<option>Device</option>
		<setting>EPM7128SLC84-15</setting>
	</row>
	<row>
		<option>Fitter Effort</option>
		<setting>Standard Fit</setting>
		<default_value>Auto Fit</default_value>
	</row>
	<row>
		<option>Use smart compilation</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Optimize Timing</option>
		<setting>Normal compilation</setting>
		<default_value>Normal compilation</default_value>
	</row>
	<row>
		<option>Optimize IOC Register Placement for Timing</option>
		<setting>On</setting>
		<default_value>On</default_value>
	</row>
	<row>
		<option>Limit to One Fitting Attempt</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
	<row>
		<option>Fitter Initial Placement Seed</option>
		<setting>1</setting>
		<default_value>1</default_value>
	</row>
	<row>
		<option>Slow Slew Rate</option>
		<setting>Off</setting>
		<default_value>Off</default_value>
	</row>
</fitter_settings>
<fitter_device_options>
	<row>
		<option>Enable user-supplied start-up clock (CLKUSR)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable device-wide reset (DEV_CLRn)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable device-wide output enable (DEV_OE)</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Enable INIT_DONE output</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Configuration scheme</option>
		<setting>Passive Serial</setting>
	</row>
	<row>
		<option>Reserve all unused pins</option>
		<setting>As input tri-stated</setting>
	</row>
	<row>
		<option>Security bit</option>
		<setting>Off</setting>
	</row>
	<row>
		<option>Base pin-out file on sameframe device</option>
		<setting>Off</setting>
	</row>
</fitter_device_options>
<input_pins>
	<row>
		<name>clk</name>
		<pin__>83</pin__>
		<combinational_fan_out>70</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>yes</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>User</location_assigned_by>
	</row>
	<row>
		<name>data_in[0]</name>
		<pin__>24</pin__>
		<lab>3</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>User</location_assigned_by>
	</row>
	<row>
		<name>data_in[1]</name>
		<pin__>22</pin__>
		<lab>2</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>User</location_assigned_by>
	</row>
	<row>
		<name>data_in[2]</name>
		<pin__>21</pin__>
		<lab>2</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>User</location_assigned_by>
	</row>
	<row>
		<name>data_in[3]</name>
		<pin__>20</pin__>
		<lab>2</lab>
		<combinational_fan_out>1</combinational_fan_out>
		<registered_fan_out>0</registered_fan_out>
		<global>no</global>
		<input_register>no</input_register>
		<i_o_standard>TTL</i_o_standard>
		<location_assigned_by>User</location_assigned_by>
	</row>
	<row>
		<name>rd_input</name>
		<pin__>36</pin__>
		<lab>4</lab>