fre_divcs.fit

本代码为一个相位控制器的源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 08/25/2005 22:59:18      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fre_divcs"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "fre"                          : INPUT_PIN  = 1      ;
    "freout"                       : OUTPUT_PIN = 58     ;
    "|lpm_add_sub:93|addcore:adder|:107" : LOCATION   = LC1_C17;
    "|lpm_add_sub:93|addcore:adder|:111" : LOCATION   = LC3_C13;
    "|lpm_add_sub:93|addcore:adder|:119" : LOCATION   = LC4_C13;
    "|lpm_add_sub:93|addcore:adder|:123" : LOCATION   = LC1_C18;
    "|lpm_add_sub:93|addcore:adder|:131" : LOCATION   = LC5_C18;
    "|lpm_add_sub:93|addcore:adder|:143" : LOCATION   = LC4_C18;
    "|lpm_add_sub:93|addcore:adder|:147" : LOCATION   = LC3_C24;
    ":4"                           : LOCATION   = LC2_C18;
    "~4~1"                         : LOCATION   = LC2_C13;
    "~4~2"                         : LOCATION   = LC3_C18;
    "~4~3"                         : LOCATION   = LC2_C24;
    "~4~4"                         : LOCATION   = LC4_C17;
    ":74"                          : LOCATION   = LC4_C24;  -- count15
    ":75"                          : LOCATION   = LC5_C24;  -- count14
    ":76"                          : LOCATION   = LC6_C24;  -- count13
    ":77"                          : LOCATION   = LC7_C24;  -- count12
    ":78"                          : LOCATION   = LC7_C18;  -- count11
    ":79"                          : LOCATION   = LC6_C18;  -- count10
    ":80"                          : LOCATION   = LC8_C18;  -- count9
    ":81"                          : LOCATION   = LC8_C24;  -- count8
    ":82"                          : LOCATION   = LC1_C24;  -- count7
    ":83"                          : LOCATION   = LC1_C13;  -- count6
    ":84"                          : LOCATION   = LC5_C13;  -- count5
    ":85"                          : LOCATION   = LC8_C13;  -- count4
    ":86"                          : LOCATION   = LC6_C13;  -- count3
    ":87"                          : LOCATION   = LC2_C17;  -- count2
    ":88"                          : LOCATION   = LC3_C17;  -- count1
    ":89"                          : LOCATION   = LC5_C17;  -- count0
    ":91"                          : LOCATION   = LC7_C13;

END;

INTERNAL_INFO "fre_divcs"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_C24,->LC5_C24,->LC6_C24,->LC7_C24,->LC7_C18,->LC6_C18,->LC8_C18,->LC8_C24,->LC1_C24,->LC1_C13,->LC5_C13,->LC8_C13,->LC6_C13,->LC2_C17,->LC3_C17,->LC5_C17,->LC7_C13|";
    LC1_C17 : LORAX = "1:MSW0R2C16,HHR18R2,PA11R2C12->LC3_C13,->LC4_C13,->LC8_C13,->LC6_C13|";
    LC4_C13 : LORAX = "1:MSW3R2C12,HHR9R2,PA13R2C17->LC1_C18|";
    LC1_C18 : LORAX = "1:MSW0R2C17,HHR20R2,PA16R2C23->LC8_C24,->LC1_C24|";
    LC4_C18 : LORAX = "1:MSW3R2C17,HHR10R2,PA12R2C23->LC3_C24,->LC5_C24,->LC6_C24,->LC7_C24|";
    LC2_C13 : LORAX = "1:MSW1R2C12,HHR8R2,PA14R2C17->LC2_C18|";
    LC2_C24 : LORAX = "1:MSW2R2C22,HHR0R2,PA21R2C17->LC2_C18|";
    LC4_C17 : LORAX = "1:MSW3R2C16,HHR7R2,PA15R2C17->LC2_C18|";
    LC2_C18 : LORAX = "1:MSW1R2C17,HHR16R2|2:PA20R2C12->LC1_C13,->LC5_C13,->LC6_C13,->LC7_C13|,2:PA9R2C23->LC8_C24,->LC1_C24||";
    LC8_C24 : LORAX = "1:MSW7R2C23,HHR47R2,PA2R2C17->LC5_C18,->LC3_C18|";
    LC1_C24 : LORAX = "1:MSW1R2C22,HHR5R2|2:PA17R2C12->LC2_C13|,2:PA17R2C17->LC5_C18||";
    LC1_C13 : LORAX = "1:MSW0R2C12,HHR22R2,PA10R2C17->LC1_C18|";
    LC6_C13 : LORAX = "1:MSW5R2C12,HHR34R2,PA1R2C16->LC4_C17|";
    LC7_C13 : LORAX = "1:MSW6R2C12,HHR29R2->OH6R2P58|";
	LC1_C17 : LORAX2 = "X, LC2_C17, LC3_C17, LC5_C17";
	LC3_C13 : LORAX2 = "X, X, LC6_C13, LC1_C17";
	LC4_C13 : LORAX2 = "LC5_C13, LC8_C13, LC6_C13, LC1_C17";
	LC1_C18 : LORAX2 = "X, X, LC1_C13, LC4_C13";
	LC5_C18 : LORAX2 = "X, LC8_C24, LC1_C24, LC1_C18";
	LC4_C18 : LORAX2 = "LC7_C18, LC6_C18, LC8_C18, LC5_C18";
	LC3_C24 : LORAX2 = "X, X, LC7_C24, LC4_C18";
	LC2_C13 : LORAX2 = "LC1_C24, LC1_C13, LC8_C13, LC5_C13";
	LC3_C18 : LORAX2 = "LC6_C18, LC7_C18, LC8_C18, LC8_C24";
	LC2_C24 : LORAX2 = "LC4_C24, LC5_C24, LC7_C24, LC6_C24";
	LC4_C17 : LORAX2 = "LC6_C13, LC2_C17, LC3_C17, LC5_C17";
	LC2_C18 : LORAX2 = "LC2_C13, LC3_C18, LC2_C24, LC4_C17";
	LC4_C24 : LORAX2 = "LC4_C24, LC5_C24, LC6_C24, LC3_C24";
	LC5_C24 : LORAX2 = "LC5_C24, LC6_C24, LC7_C24, LC4_C18";
	LC6_C24 : LORAX2 = "X, LC6_C24, LC7_C24, LC4_C18";
	LC7_C24 : LORAX2 = "X, X, LC7_C24, LC4_C18";
	LC7_C18 : LORAX2 = "LC7_C18, LC6_C18, LC8_C18, LC5_C18";
	LC6_C18 : LORAX2 = "X, LC6_C18, LC8_C18, LC5_C18";
	LC8_C18 : LORAX2 = "X, LC2_C18, LC8_C18, LC5_C18";
	LC8_C24 : LORAX2 = "LC2_C18, LC1_C24, LC8_C24, LC1_C18";
	LC1_C24 : LORAX2 = "X, LC2_C18, LC1_C24, LC1_C18";
	LC1_C13 : LORAX2 = "X, LC2_C18, LC1_C13, LC4_C13";
	LC5_C13 : LORAX2 = "LC2_C18, LC3_C13, LC8_C13, LC5_C13";
	LC8_C13 : LORAX2 = "X, LC8_C13, LC6_C13, LC1_C17";
	LC6_C13 : LORAX2 = "X, LC2_C18, LC6_C13, LC1_C17";
	LC2_C17 : LORAX2 = "X, LC2_C17, LC3_C17, LC5_C17";
	LC3_C17 : LORAX2 = "X, X, LC3_C17, LC5_C17";
	LC5_C17 : LORAX2 = "X, X, X, LC5_C17";
	LC7_C13 : LORAX2 = "LC2_C18, X, X, LC7_C13";
END;