fre_test.fit

本代码为一个相位控制器的源程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 08/26/2005 08:43:02      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "fre_test"
BEGIN

    DEVICE = "EPF10K10LC84-3";

    "clk"                          : INPUT_PIN  = 1      ;
    "clk_out"                      : OUTPUT_PIN = 22     ;
    "|lpm_add_sub:109|addcore:adder|:107" : LOCATION   = LC3_B7 ;
    "|lpm_add_sub:109|addcore:adder|:115" : LOCATION   = LC4_B7 ;
    "|lpm_add_sub:109|addcore:adder|:123" : LOCATION   = LC4_B11;
    "|lpm_add_sub:109|addcore:adder|:131" : LOCATION   = LC1_B11;
    "|lpm_add_sub:109|addcore:adder|:143" : LOCATION   = LC1_B8 ;
    "|lpm_add_sub:109|addcore:adder|:147" : LOCATION   = LC3_B10;
    ":4"                           : LOCATION   = LC1_B10;
    "~4~1"                         : LOCATION   = LC3_B11;
    "~4~2"                         : LOCATION   = LC2_B8 ;
    "~4~3"                         : LOCATION   = LC2_B11;
    "~4~4"                         : LOCATION   = LC2_B10;
    ":74"                          : LOCATION   = LC4_B10;  -- count15
    ":75"                          : LOCATION   = LC5_B10;  -- count14
    ":76"                          : LOCATION   = LC6_B10;  -- count13
    ":77"                          : LOCATION   = LC7_B10;  -- count12
    ":78"                          : LOCATION   = LC4_B8 ;  -- count11
    ":79"                          : LOCATION   = LC3_B8 ;  -- count10
    ":80"                          : LOCATION   = LC5_B8 ;  -- count9
    ":81"                          : LOCATION   = LC8_B11;  -- count8
    ":82"                          : LOCATION   = LC5_B11;  -- count7
    ":83"                          : LOCATION   = LC6_B11;  -- count6
    ":84"                          : LOCATION   = LC7_B11;  -- count5
    ":85"                          : LOCATION   = LC1_B7 ;  -- count4
    ":86"                          : LOCATION   = LC2_B7 ;  -- count3
    ":87"                          : LOCATION   = LC7_B7 ;  -- count2
    ":88"                          : LOCATION   = LC5_B7 ;  -- count1
    ":89"                          : LOCATION   = LC6_B7 ;  -- count0
    ":107"                         : LOCATION   = LC2_B1 ;

END;

INTERNAL_INFO "fre_test"
BEGIN
	DEVICE = EPF10K10LC84-3;
    OD4P1   : LORAX = "1:FB4->LC4_B10,->LC5_B10,->LC6_B10,->LC7_B10,->LC4_B8,->LC3_B8,->LC5_B8,->LC8_B11,->LC5_B11,->LC6_B11,->LC7_B11,->LC1_B7,->LC2_B7,->LC7_B7,->LC5_B7,->LC6_B7,->LC2_B1|";
    LC3_B7  : LORAX = "1:MSW2R1C6,HHL3R1,PA4R1C9->LC1_B10|";
    LC4_B7  : LORAX = "1:MSW3R1C6,HHL9R1,PA13R1C10->LC4_B11,->LC6_B11,->LC7_B11|";
    LC1_B11 : LORAX = "1:MSW0R1C10,HHL18R1,PA11R1C7->LC1_B8,->LC4_B8,->LC3_B8,->LC5_B8|";
    LC1_B8  : LORAX = "1:MSW0R1C7,HHL23R1,PA11R1C9->LC3_B10,->LC5_B10,->LC6_B10,->LC7_B10|";
    LC2_B8  : LORAX = "1:MSW1R1C7,HHL11R1,PA21R1C10->LC2_B11|";
    LC2_B11 : LORAX = "1:MSW1R1C10,HHL5R1,PA17R1C9->LC1_B10|";
    LC1_B10 : LORAX = "1:MSW0R1C9,HHL19R1|2:PA12R1C0->LC2_B1|,2:PA17R1C6->LC2_B7,->LC7_B7,->LC5_B7|,2:PA17R1C7->LC5_B8|,2:PA17R1C10->LC8_B11,->LC5_B11,->LC6_B11,->LC7_B11||";
    LC1_B7  : LORAX = "1:MSW0R1C6,HHL22R1,PA10R1C10->LC3_B11|";
    LC2_B7  : LORAX = "1:MSW1R1C6,HHL8R1,PA14R1C10->LC2_B11|";
    LC2_B1  : LORAX = "1:MSW1R1C0,G19R1->OH9R1P22|";
	LC3_B7  : LORAX2 = "X, LC7_B7, LC5_B7, LC6_B7";
	LC4_B7  : LORAX2 = "X, LC1_B7, LC2_B7, LC3_B7";
	LC4_B11 : LORAX2 = "X, LC6_B11, LC7_B11, LC4_B7";
	LC1_B11 : LORAX2 = "X, LC8_B11, LC5_B11, LC4_B11";
	LC1_B8  : LORAX2 = "LC4_B8, LC3_B8, LC5_B8, LC1_B11";
	LC3_B10 : LORAX2 = "X, X, LC7_B10, LC1_B8";
	LC3_B11 : LORAX2 = "LC5_B11, LC6_B11, LC7_B11, LC1_B7";
	LC2_B8  : LORAX2 = "X, LC3_B8, LC4_B8, LC5_B8";
	LC2_B11 : LORAX2 = "LC3_B11, LC2_B8, LC8_B11, LC2_B7";
	LC2_B10 : LORAX2 = "X, LC4_B10, LC5_B10, LC6_B10";
	LC1_B10 : LORAX2 = "LC7_B10, LC2_B10, LC2_B11, LC3_B7";
	LC4_B10 : LORAX2 = "LC4_B10, LC5_B10, LC6_B10, LC3_B10";
	LC5_B10 : LORAX2 = "LC7_B10, LC5_B10, LC6_B10, LC1_B8";
	LC6_B10 : LORAX2 = "X, LC7_B10, LC6_B10, LC1_B8";
	LC7_B10 : LORAX2 = "X, X, LC7_B10, LC1_B8";
	LC4_B8  : LORAX2 = "LC4_B8, LC3_B8, LC5_B8, LC1_B11";
	LC3_B8  : LORAX2 = "X, LC3_B8, LC5_B8, LC1_B11";
	LC5_B8  : LORAX2 = "X, LC1_B10, LC5_B8, LC1_B11";
	LC8_B11 : LORAX2 = "LC1_B10, LC8_B11, LC5_B11, LC4_B11";
	LC5_B11 : LORAX2 = "X, LC1_B10, LC5_B11, LC4_B11";
	LC6_B11 : LORAX2 = "LC1_B10, LC6_B11, LC7_B11, LC4_B7";
	LC7_B11 : LORAX2 = "X, LC1_B10, LC7_B11, LC4_B7";
	LC1_B7  : LORAX2 = "X, LC1_B7, LC2_B7, LC3_B7";
	LC2_B7  : LORAX2 = "X, LC1_B10, LC2_B7, LC3_B7";
	LC7_B7  : LORAX2 = "LC1_B10, LC7_B7, LC5_B7, LC6_B7";
	LC5_B7  : LORAX2 = "X, LC1_B10, LC5_B7, LC6_B7";
	LC6_B7  : LORAX2 = "X, X, X, LC6_B7";
	LC2_B1  : LORAX2 = "LC1_B10, X, X, LC2_B1";
END;