seg.fit

这是一个用VHDL语言编写的电梯控制程序

-- MAX+plus II Compiler Fit File      
-- Version 10.0 9/14/2000             
-- Compiled: 03/06/2007 13:18:45      

-- Copyright (C) 1988-2000 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "seg"
BEGIN

    DEVICE = "EPF10K10LC84-4";

    "a1"                           : INPUT_PIN  = 2      ;
    "a2"                           : INPUT_PIN  = 44     ;
    "a3"                           : INPUT_PIN  = 42     ;
    "clk"                          : INPUT_PIN  = 1      ;
    "q0"                           : OUTPUT_PIN = 65     ;
    "q1"                           : OUTPUT_PIN = 21     ;
    "q2"                           : OUTPUT_PIN = 66     ;
    "q3"                           : OUTPUT_PIN = 23     ;
    "q4"                           : OUTPUT_PIN = 24     ;
    "q5"                           : OUTPUT_PIN = 25     ;
    "q6"                           : OUTPUT_PIN = 22     ;
    ":5"                           : LOCATION   = LC2_B1 ;
    ":7"                           : LOCATION   = LC8_B1 ;
    ":9"                           : LOCATION   = LC6_B1 ;
    ":11"                          : LOCATION   = LC4_B1 ;
    ":13"                          : LOCATION   = LC3_B1 ;
    ":15"                          : LOCATION   = LC1_B1 ;
    ":17"                          : LOCATION   = LC5_B1 ;

END;

INTERNAL_INFO "seg"
BEGIN
	DEVICE = EPF10K10LC84-4;
    OD1P2   : LORAX = "1:FB1|2:FH1R1,PA20R1C0->LC2_B1,->LC8_B1,->LC6_B1,->LC4_B1,->LC3_B1,->LC1_B1,->LC5_B1||";
    OD2P44  : LORAX = "1:FB2|2:FH2R1,PA6R1C0->LC2_B1,->LC8_B1,->LC6_B1,->LC4_B1,->LC3_B1,->LC1_B1,->LC5_B1||";
    OD3P42  : LORAX = "1:FB3|2:FH3R1,PA5R1C0->LC2_B1,->LC8_B1,->LC6_B1,->LC4_B1,->LC3_B1,->LC1_B1,->LC5_B1||";
    OD4P1   : LORAX = "1:FB4->LC2_B1,->LC8_B1,->LC6_B1,->LC4_B1,->LC3_B1,->LC1_B1,->LC5_B1|";
    LC2_B1  : LORAX = "1:MSW1R1C0,HHL8R1->OH9R1P22|";
    LC8_B1  : LORAX = "1:MSW7R1C0,HHL46R1->OH15R1P25|";
    LC6_B1  : LORAX = "1:MSW5R1C1,G81R1->OH13R1P24|";
    LC4_B1  : LORAX = "1:MSW3R1C0,HHL9R1->OH11R1P23|";
    LC3_B1  : LORAX = "1:MSW2R1C1,G2R1->OH2R1P66|";
    LC1_B1  : LORAX = "1:MSW0R1C0,HHL22R1->OH8R1P21|";
    LC5_B1  : LORAX = "1:MSW4R1C0,G50R1->OH4R1P65|";
	LC2_B1  : LORAX2 = "OD2P44, OD3P42, OD1P2, LC2_B1";
	LC8_B1  : LORAX2 = "OD3P42, OD2P44, OD1P2, LC8_B1";
	LC6_B1  : LORAX2 = "OD2P44, OD3P42, OD1P2, LC6_B1";
	LC4_B1  : LORAX2 = "OD2P44, OD3P42, OD1P2, LC4_B1";
	LC3_B1  : LORAX2 = "OD2P44, OD3P42, OD1P2, LC3_B1";
	LC1_B1  : LORAX2 = "OD3P42, OD2P44, OD1P2, LC1_B1";
	LC5_B1  : LORAX2 = "OD3P42, OD1P2, OD2P44, LC5_B1";
END;