tcd1208_driver.log

汽车四轮定位CCD驱动CPLD源代码

|--------------------------------------------|
|- ispDesignExpert Fitter Report File       -|
|- Version 8.3.02.12_DE_ADV_PC                              -|
|- (c)Copyright, Lattice Semiconductor 1999 -|
|--------------------------------------------|



*** Source file is tcd1208_driver.tt4 . Device is M4A5-128/64-10YC .

<Note>  F40016:  0 pins have been reserved out of 70 .
<Note>  F40021:  70 pins are available after reservation, 15 are required
                 by the design.
<Note>  F35065:  For outputs, implicit output enables will be set to VCC.
<Note>  F35068:  Since SET/RESET DON'T CARE is turned off, any unspecified
                 SET/RESET will be defaulted to GND.

*** End of Pla2db. 
Check preplaced pins/nodes
Check preplaced blocks
Check unreferenced pins/nodes
Check clock rules

List of global clocks:
   clock:
...... Is preplaced at a global clock pin.

List of non-global clocks:
   dclk:
...... is preplaced on a pin that is not a dedicated clock.
   D0_GoutDFFRH:
...... is a Node.
   P0_RSDFFRH:
...... is a Node.
   P0_countc_0:
...... is a Node.

*** End of Normalization.

*** End of DRC. 

*** Start Partitioning
 
*** Partitioning successful.


*** Starting Place&Route

*** Place&Route Successful
<Note>  F35088:  Single-literal clock signal used as product term clock in
                 block 0. Clock is dclk (Pin 93).
...... Zero Hold Time For Input Registers? N
*** The JEDEC file generated is tcd1208_driver.jed .
*** Report Generator invoked.
*** Report Generator end.

// Fitting successful.
// ERROR count 0 WARNING count 0 .