ad9851.fit.qmsg

用VHDL语言编写的DDS正弦函数发生器

{ "Info" "IFSAC_FSAC_FINISH_LUT_IO_RAM_PACKING" "" "Info: Finished moving registers into I/O cells, LUTs, and RAM blocks" {  } {  } 0 0 "Finished moving registers into I/O cells, LUTs, and RAM blocks" 0 0}
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "00:00:00 " "Info: Finished register packing: elapsed time is 00:00:00" {  } {  } 0 0 "Finished register packing: elapsed time is %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." {  } {  } 0 0 "Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0 0 "Fitter placement preparation operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0 0 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0 0 "Fitter placement operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0 0 "Fitter placement was successful" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Info: Fitter placement operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter placement operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "4.319 ns memory memory " "Info: Estimated most critical path is memory to memory delay of 4.319 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.000 ns) 0.000 ns FM:ROM\|altsyncram:altsyncram_component\|altsyncram_jm21:auto_generated\|ram_block1a31~porta_address_reg7 1 MEM M4K_X13_Y7 1 " "Info: 1: + IC(0.000 ns) + CELL(0.000 ns) = 0.000 ns; Loc. = M4K_X13_Y7; Fanout = 1; MEM Node = 'FM:ROM\|altsyncram:altsyncram_component\|altsyncram_jm21:auto_generated\|ram_block1a31~porta_address_reg7'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { FM:ROM|altsyncram:altsyncram_component|altsyncram_jm21:auto_generated|ram_block1a31~porta_address_reg7 } "NODE_NAME" } } { "db/altsyncram_jm21.tdf" "" { Text "E:/my project/quartusII/AD9851/db/altsyncram_jm21.tdf" 663 2 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(4.319 ns) 4.319 ns FM:ROM\|altsyncram:altsyncram_component\|altsyncram_jm21:auto_generated\|q_a\[31\] 2 MEM M4K_X13_Y7 1 " "Info: 2: + IC(0.000 ns) + CELL(4.319 ns) = 4.319 ns; Loc. = M4K_X13_Y7; Fanout = 1; MEM Node = 'FM:ROM\|altsyncram:altsyncram_component\|altsyncram_jm21:auto_generated\|q_a\[31\]'" {  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "4.319 ns" { FM:ROM|altsyncram:altsyncram_component|altsyncram_jm21:auto_generated|ram_block1a31~porta_address_reg7 FM:ROM|altsyncram:altsyncram_component|altsyncram_jm21:auto_generated|q_a[31] } "NODE_NAME" } } { "db/altsyncram_jm21.tdf" "" { Text "E:/my project/quartusII/AD9851/db/altsyncram_jm21.tdf" 40 2 0 } }  } 0 0 "%4!d!: + %1!s! = %2!s!; Loc. = %6!s!; Fanout = %7!d!; %5!s! Node = '%3!s!'" 0 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "4.319 ns ( 100.00 % ) " "Info: Total cell delay = 4.319 ns ( 100.00 % )" {  } {  } 0 0 "Total cell delay = %1!s! %2!s!" 0 0}  } { { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "4.319 ns" { FM:ROM|altsyncram:altsyncram_component|altsyncram_jm21:auto_generated|ram_block1a31~porta_address_reg7 FM:ROM|altsyncram:altsyncram_component|altsyncram_jm21:auto_generated|q_a[31] } "NODE_NAME" } }  } 0 0 "Estimated most critical path is %2!s! to %3!s! delay of %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0 0 "Fitter routing operations beginning" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "2 2 " "Info: Average interconnect usage is 2% of the available device resources. Peak interconnect usage is 2%" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "x0_y0 x13_y14 " "Info: The peak interconnect region extends from location x0_y0 to location x13_y14" {  } {  } 0 0 "The peak interconnect region extends from location %1!s! to location %2!s!" 0 0}  } {  } 0 0 "Average interconnect usage is %1!d!%% of the available device resources. Peak interconnect usage is %2!d!%%" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:01 " "Info: Fitter routing operations ending: elapsed time is 00:00:01" {  } {  } 0 0 "Fitter routing operations ending: elapsed time is %1!s!" 0 0}
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "Info: The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Info: Optimizations that may affect the design's routability were skipped" {  } {  } 0 0 "Optimizations that may affect the design's routability were skipped" 0 0} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Info: Optimizations that may affect the design's timing were skipped" {  } {  } 0 0 "Optimizations that may affect the design's timing were skipped" 0 0}  } {  } 0 0 "The Fitter performed an Auto Fit compilation.  Optimizations were skipped to reduce compilation time." 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Fixed Delay Chain Operation " "Info: Completed Fixed Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IDAT_DAT_STARTED" "" "Info: Started post-fitting delay annotation" {  } {  } 0 0 "Started post-fitting delay annotation" 0 0}
{ "Info" "IDAT_DAT_COMPLETED" "" "Info: Delay annotation completed successfully" {  } {  } 0 0 "Delay annotation completed successfully" 0 0}
{ "Info" "IFYGR_FYGR_OPINFO_COMPLETED_OP" "Auto Delay Chain Operation " "Info: Completed Auto Delay Chain Operation" {  } {  } 0 0 "Completed %1!s!" 0 0}
{ "Info" "IFSAC_FSAC_RAM_METASTABILITY_INFO" "" "Info: Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." {  } {  } 0 0 "Design uses memory blocks. Violating setup or hold times of memory block address registers could cause memory contents to be corrupted. Make sure that all memory block address registers meet the setup and hold time requirements." 0 0}
{ "Warning" "WFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN" "1 " "Warning: Following 1 pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" { { "Info" "IFIOMGR_BIDIR_OR_OUTPUT_WITH_TRIVIAL_DATAIN_SUB" "TCL_OE GND " "Info: Pin TCL_OE has GND driving its datain port" {  } { { "SYS_TOP.bdf" "" { Schematic "E:/my project/quartusII/AD9851/SYS_TOP.bdf" { { 0 936 1112 16 "TCL_OE" "" } } } } { "d:/altera/quartus60/win/Assignment Editor.qase" "" { Assignment "d:/altera/quartus60/win/Assignment Editor.qase" 1 { { 0 "TCL_OE" } } } } { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { TCL_OE } "NODE_NAME" } } { "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" { Floorplan "d:/altera/quartus60/win/TimingClosureFloorplan.fld" "" "" { TCL_OE } "NODE_NAME" } }  } 0 0 "Pin %1!s! has %2!s! driving its datain port" 0 0}  } {  } 0 0 "Following %1!d! pins have nothing, GND, or VCC driving datain port -- changes to this connectivity may change fitting results" 0 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 1  Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 1 warning" { { "Info" "IQEXE_END_BANNER_TIME" "Fri Jul 27 17:06:28 2007 " "Info: Processing ended: Fri Jul 27 17:06:28 2007" {  } {  } 0 0 "Processing ended: %1!s!" 0 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:12 " "Info: Elapsed time: 00:00:12" {  } {  } 0 0 "Elapsed time: %1!s!" 0 0}  } {  } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0}
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "E:/my project/quartusII/AD9851/AD9851.fit.smsg " "Info: Generated suppressed messages file E:/my project/quartusII/AD9851/AD9851.fit.smsg" {  } {  } 0 0 "Generated suppressed messages file %1!s!" 0 0}