mypll2.v

基于ALTERA 公司cyclone系列FPGA的程序

// megafunction wizard: %ALTPLL%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altpll 

// ============================================================
// File Name: mypll2.v
// Megafunction Name(s):
// 			altpll
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 6.0 Build 178 04/27/2006 SJ Full Version
// ************************************************************


//Copyright (C) 1991-2006 Altera Corporation
//Your use of Altera Corporation's design tools, logic functions 
//and other software and tools, and its AMPP partner logic 
//functions, and any output files any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Altera Program License 
//Subscription Agreement, Altera MegaCore Function License 
//Agreement, or other applicable license agreement, including, 
//without limitation, that your use is for the sole purpose of 
//programming logic devices manufactured by Altera and sold by 
//Altera or its authorized distributors.  Please refer to the 
//applicable agreement for further details.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module mypll2 (
	areset,
	inclk0,
	c0,
	c1,
	e0,
	locked);

	input	  areset;
	input	  inclk0;
	output	  c0;
	output	  c1;
	output	  e0;
	output	  locked;

	wire [5:0] sub_wire0;
	wire  sub_wire3;
	wire [3:0] sub_wire4;
	wire [0:0] sub_wire8 = 1'h0;
	wire [1:1] sub_wire2 = sub_wire0[1:1];
	wire [0:0] sub_wire1 = sub_wire0[0:0];
	wire  c0 = sub_wire1;
	wire  c1 = sub_wire2;
	wire  locked = sub_wire3;
	wire [0:0] sub_wire5 = sub_wire4[0:0];
	wire  e0 = sub_wire5;
	wire  sub_wire6 = inclk0;
	wire [1:0] sub_wire7 = {sub_wire8, sub_wire6};

	altpll	altpll_component (
				.inclk (sub_wire7),
				.areset (areset),
				.clk (sub_wire0),
				.locked (sub_wire3),
				.extclk (sub_wire4),
				.activeclock (),
				.clkbad (),
				.clkena ({6{1'b1}}),
				.clkloss (),
				.clkswitch (1'b0),
				.enable0 (),
				.enable1 (),
				.extclkena ({4{1'b1}}),
				.fbin (1'b1),
				.pfdena (1'b1),
				.pllena (1'b1),
				.scanaclr (1'b0),
				.scanclk (1'b0),
				.scandata (1'b0),
				.scandataout (),
				.scandone (),
				.scanread (1'b0),
				.scanwrite (1'b0),
				.sclkout0 (),
				.sclkout1 ());
	defparam
		altpll_component.clk0_divide_by = 1,
		altpll_component.clk0_duty_cycle = 50,
		altpll_component.clk0_multiply_by = 3,
		altpll_component.clk0_phase_shift = "0",
		altpll_component.clk1_divide_by = 1,
		altpll_component.clk1_duty_cycle = 50,
		altpll_component.clk1_multiply_by = 1,
		altpll_component.clk1_phase_shift = "0",
		altpll_component.compensate_clock = "CLK0",
		altpll_component.extclk0_divide_by = 1,
		altpll_component.extclk0_duty_cycle = 50,
		altpll_component.extclk0_multiply_by = 3,
		altpll_component.extclk0_phase_shift = "0",
		altpll_component.inclk0_input_frequency = 10000,
		altpll_component.intended_device_family = "Cyclone",
		altpll_component.invalid_lock_multiplier = 5,
		altpll_component.lpm_type = "altpll",
		altpll_component.operation_mode = "NORMAL",
		altpll_component.pll_type = "AUTO",
		altpll_component.port_activeclock = "PORT_UNUSED",
		altpll_component.port_areset = "PORT_USED",
		altpll_component.port_clkbad0 = "PORT_UNUSED",
		altpll_component.port_clkbad1 = "PORT_UNUSED",
		altpll_component.port_clkloss = "PORT_UNUSED",
		altpll_component.port_clkswitch = "PORT_UNUSED",
		altpll_component.port_fbin = "PORT_UNUSED",
		altpll_component.port_inclk0 = "PORT_USED",
		altpll_component.port_inclk1 = "PORT_UNUSED",
		altpll_component.port_locked = "PORT_USED",
		altpll_component.port_pfdena = "PORT_UNUSED",
		altpll_component.port_pllena = "PORT_UNUSED",
		altpll_component.port_scanaclr = "PORT_UNUSED",
		altpll_component.port_scanclk = "PORT_UNUSED",
		altpll_component.port_scandata = "PORT_UNUSED",
		altpll_component.port_scandataout = "PORT_UNUSED",
		altpll_component.port_scandone = "PORT_UNUSED",
		altpll_component.port_scanread = "PORT_UNUSED",
		altpll_component.port_scanwrite = "PORT_UNUSED",
		altpll_component.port_clk0 = "PORT_USED",
		altpll_component.port_clk1 = "PORT_USED",
		altpll_component.port_clk3 = "PORT_UNUSED",
		altpll_component.port_clk4 = "PORT_UNUSED",
		altpll_component.port_clk5 = "PORT_UNUSED",
		altpll_component.port_clkena0 = "PORT_UNUSED",
		altpll_component.port_clkena1 = "PORT_UNUSED",
		altpll_component.port_clkena3 = "PORT_UNUSED",
		altpll_component.port_clkena4 = "PORT_UNUSED",
		altpll_component.port_clkena5 = "PORT_UNUSED",
		altpll_component.port_enable0 = "PORT_UNUSED",
		altpll_component.port_enable1 = "PORT_UNUSED",
		altpll_component.port_extclk0 = "PORT_USED",
		altpll_component.port_extclk1 = "PORT_UNUSED",
		altpll_component.port_extclk2 = "PORT_UNUSED",
		altpll_component.port_extclk3 = "PORT_UNUSED",
		altpll_component.port_extclkena0 = "PORT_UNUSED",
		altpll_component.port_extclkena1 = "PORT_UNUSED",
		altpll_component.port_extclkena2 = "PORT_UNUSED",
		altpll_component.port_extclkena3 = "PORT_UNUSED",
		altpll_component.port_sclkout0 = "PORT_UNUSED",
		altpll_component.port_sclkout1 = "PORT_UNUSED",
		altpll_component.valid_lock_multiplier = 1;


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
// Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"