cam.fit.qmsg

用VHDL编写的程序

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 5.0 Build 148 04/26/2005 SJ Full Version " "Info: Version 5.0 Build 148 04/26/2005 SJ Full Version" {  } {  } 0} { "Info" "IQEXE_START_BANNER_TIME" "Fri Nov 18 16:52:07 2005 " "Info: Processing started: Fri Nov 18 16:52:07 2005" {  } {  } 0}  } {  } 4}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off cam -c cam " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off cam -c cam" {  } {  } 0}
{ "Info" "IMPP_MPP_AVAILABLE_IO_STANDARD_IN_DEVICE" "EP20K30ETC144-1 " "Info: Auto device selection -- successful I/O standard check for EP20K30ETC144-1" {  } {  } 0}
{ "Info" "IMPP_MPP_AVAILABLE_PCI_IO_IN_DEVICE" "EP20K30ETC144-1 " "Info: Auto device selection -- successful PCI I/O clamp diode check for EP20K30ETC144-1" {  } {  } 0}
{ "Info" "IMPP_MPP_AUTO_ASSIGNED_DEVICE" "cam EP20K30ETC144-1 " "Info: Automatically selected device EP20K30ETC144-1 for design cam" {  } {  } 0}
{ "Info" "ITAN_TDC_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- optimizing circuit to achieve the following default global requirements" { { "Info" "ITAN_TDC_ASSUMED_DEFAULT_REQUIREMENT" "fmax 1000 MHz " "Info: Assuming a global fmax requirement of 1000 MHz" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tsu " "Info: Not setting a global tsu requirement" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tco " "Info: Not setting a global tco requirement" {  } {  } 0} { "Info" "ITAN_TDC_NO_DEFAULT_REQUIREMENT" "tpd " "Info: Not setting a global tpd requirement" {  } {  } 0}  } {  } 0}
{ "Info" "IFIT_FIT_GLOBAL_SIGNAL_PROMOTION" "clk automatically " "Info: Promoted cell \"clk\" to global signal automatically" {  } {  } 0}
{ "Info" "IFIT_FIT_GLOBAL_SIGNAL_PROMOTION" "rst automatically " "Info: Promoted cell \"rst\" to global signal automatically" {  } {  } 0}
{ "Info" "IFIT_FIT_ATTEMPT" "1 Fri Nov 18 2005 16:52:08 " "Info: Started fitting attempt 1 on Fri Nov 18 2005 at 16:52:08" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Info: Fitter placement preparation operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Info: Fitter placement preparation operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Info: Fitter placement operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Info: Fitter placement was successful" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACER_ESTIMATED_ROUTING_RESOURCE_USAGE" "" "Info: Design requires the following device routing resources:" { { "Info" "IFITAPI_FITAPI_INFO_VPR_ROUTING_RESOURCE_USAGE_OVERALL_COL_FSTTRK" "1 " "Info: Overall column FastTrack interconnect = 1%" {  } {  } 0} { "Info" "IFITAPI_FITAPI_INFO_VPR_ROUTING_RESOURCE_USAGE_OVERALL_ROW_FSTTRK" "1 " "Info: Overall row FastTrack interconnect = 1%" {  } {  } 0} { "Info" "IFITAPI_FITAPI_INFO_VPR_ROUTING_RESOURCE_USAGE_MAX_COL_FSTTRK" "3 " "Info: Maximum column FastTrack interconnect = 3%" {  } {  } 0} { "Info" "IFITAPI_FITAPI_INFO_VPR_ROUTING_RESOURCE_USAGE_MAX_ROW_FSTTRK" "6 " "Info: Maximum row FastTrack interconnect = 6%" {  } {  } 0}  } {  } 0}
{ "Info" "ITDB_FULL_ESTIMATED_DATA_PATH_RESULT" "9.152 ns register register " "Info: Estimated most critical path is register to register delay of 9.152 ns" { { "Info" "ITDB_NODE_DELAY" "IC(0.000 ns) + CELL(0.161 ns) 0.161 ns \\main:tag\[2\]\[1\] 1 REG LAB_7_D2 2 " "Info: 1: + IC(0.000 ns) + CELL(0.161 ns) = 0.161 ns; Loc. = LAB_7_D2; Fanout = 2; REG Node = '\\main:tag\[2\]\[1\]'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "" { \main:tag[2][1] } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.246 ns) + CELL(0.890 ns) 1.297 ns reduce_nor~466 2 COMB LAB_7_D2 1 " "Info: 2: + IC(0.246 ns) + CELL(0.890 ns) = 1.297 ns; Loc. = LAB_7_D2; Fanout = 1; COMB Node = 'reduce_nor~466'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "1.136 ns" { \main:tag[2][1] reduce_nor~466 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.246 ns) + CELL(0.890 ns) 2.433 ns reduce_nor~470 3 COMB LAB_7_D2 3 " "Info: 3: + IC(0.246 ns) + CELL(0.890 ns) = 2.433 ns; Loc. = LAB_7_D2; Fanout = 3; COMB Node = 'reduce_nor~470'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "1.136 ns" { reduce_nor~466 reduce_nor~470 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.858 ns) + CELL(0.890 ns) 4.181 ns \\main:data\[3\]\[0\]~41 4 COMB LAB_4_D2 2 " "Info: 4: + IC(0.858 ns) + CELL(0.890 ns) = 4.181 ns; Loc. = LAB_4_D2; Fanout = 2; COMB Node = '\\main:data\[3\]\[0\]~41'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "1.748 ns" { reduce_nor~470 \main:data[3][0]~41 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.246 ns) + CELL(0.890 ns) 5.317 ns found~51 5 COMB LAB_4_D2 5 " "Info: 5: + IC(0.246 ns) + CELL(0.890 ns) = 5.317 ns; Loc. = LAB_4_D2; Fanout = 5; COMB Node = 'found~51'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "1.136 ns" { \main:data[3][0]~41 found~51 } "NODE_NAME" } "" } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(0.246 ns) + CELL(0.890 ns) 6.453 ns count\[1\]~147 6 COMB LAB_4_D2 6 " "Info: 6: + IC(0.246 ns) + CELL(0.890 ns) = 6.453 ns; Loc. = LAB_4_D2; Fanout = 6; COMB Node = 'count\[1\]~147'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "1.136 ns" { found~51 count[1]~147 } "NODE_NAME" } "" } } { "cam.vhd" "" { Text "C:/Documents and Settings/yoyo/桌面/CAM/cam.vhd" 54 -1 0 } }  } 0} { "Info" "ITDB_NODE_DELAY" "IC(2.076 ns) + CELL(0.623 ns) 9.152 ns count\[0\] 7 REG LAB_7_D1 9 " "Info: 7: + IC(2.076 ns) + CELL(0.623 ns) = 9.152 ns; Loc. = LAB_7_D1; Fanout = 9; REG Node = 'count\[0\]'" {  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "2.699 ns" { count[1]~147 count[0] } "NODE_NAME" } "" } } { "cam.vhd" "" { Text "C:/Documents and Settings/yoyo/桌面/CAM/cam.vhd" 54 -1 0 } }  } 0} { "Info" "ITDB_TOTAL_CELL_DELAY" "5.234 ns 57.19 % " "Info: Total cell delay = 5.234 ns ( 57.19 % )" {  } {  } 0} { "Info" "ITDB_TOTAL_IC_DELAY" "3.918 ns 42.81 % " "Info: Total interconnect delay = 3.918 ns ( 42.81 % )" {  } {  } 0}  } { { "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" "" { Report "C:/Documents and Settings/yoyo/桌面/CAM/db/cam_cmp.qrpt" Compiler "cam" "UNKNOWN" "V1" "C:/Documents and Settings/yoyo/桌面/CAM/db/cam.quartus_db" { Floorplan "C:/Documents and Settings/yoyo/桌面/CAM/" "" "9.152 ns" { \main:tag[2][1] reduce_nor~466 reduce_nor~470 \main:data[3][0]~41 found~51 count[1]~147 count[0] } "NODE_NAME" } "" } }  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:01 " "Info: Fitter placement operations ending: elapsed time is 00:00:01" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Info: Fitter routing operations beginning" {  } {  } 0}
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Info: Fitter routing operations ending: elapsed time is 00:00:00" {  } {  } 0}
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 0 s Quartus II " "Info: Quartus II Fitter was successful. 0 errors, 0 warnings" { { "Info" "IQEXE_END_BANNER_TIME" "Fri Nov 18 16:52:11 2005 " "Info: Processing ended: Fri Nov 18 16:52:11 2005" {  } {  } 0} { "Info" "IQEXE_ELAPSED_TIME" "00:00:04 " "Info: Elapsed time: 00:00:04" {  } {  } 0}  } {  } 0}