top5_rx_3s500e_cp132_t_a.ucf

XAPP485 - 以高达 666 Mbps 的速率在 Spartan-3E FPGA 中实现 1：7 的解串行化

# November 1st 2006
#
# Timespec should be set to period plus an amount for jitter
# For example : pixel clock of 90 MHz => high speed clock of 315 MHz (3175 pS).
# 		From spreadsheet : jitter is 464 pS
# 		1/(3175 - (0.5*464)) => 340 MHz

net rxclk35 tnm = rxclk35 ;
net rxclk35not tnm = rxclk35not ;
net rxclk tnm = rxclk1 ;

timespec tsrx00 = period rxclk35 340 Mhz ;
timespec tsrx01 = period rxclk35not tsrx00 ;
timespec tsrx02 = period rxclk1 tsrx00/3.5 ;
timespec tsrx03 = from rxclk35 to rxclk1 = tsrx00/2 ;

# receive clock input 1, bank 0

net "rxclkina1_p" loc = "A10" ;		# IO_L04_P_0/GCLK4
net "rxclkina1_n" loc = "C9" ;		# IO_L04_N_0/GCLK5

# channel A lvds inputs - Bank 0

net "dataina_p(0)"  loc = "A13" ;	# IO_L01_P_0
net "dataina_n(0)"  loc = "C12" ;	# IO_L01_N_0
net "dataina_p(1)"  loc = "B9" ;	# IO_L05_P_0
net "dataina_n(1)"  loc = "A9" ;	# IO_L05_N_0
net "dataina_p(2)"  loc = "A7" ;	# IP_L07_P_0
net "dataina_n(2)"  loc = "B7" ;	# IP_L07_N_0
net "dataina_p(3)"  loc = "B6" ;	# IO_L08_P_0
net "dataina_n(3)"  loc = "C6" ;	# IO_L08_N_0
net "dataina_p(4)"  loc = "B5" ;	# IO_L09_P_0
net "dataina_n(4)"  loc = "C5" ;	# IO_L09_N_0
#net "dataina_p(5)"  loc = "A3" ;	# IO_L11_P_0
#net "dataina_n(5)"  loc = "B3" ;	# IO_L11_N_0

set "rx0/hset" rloc_origin = "X42Y84" ;

set "apa0/hset" rloc_origin = "X50Y90" ;					# Delete or comment this line if auto phase alignment is not being used

timespec tsapa00 = from ffs(apa0/chfoundc) to ffs(apa0/sm) = tsrx00/2 ;		# Delete or comment this line if auto phase alignment is not being used