top5_rx_3s1600e_fg484_tl_a.ucf

XAPP485 - 以高达 666 Mbps 的速率在 Spartan-3E FPGA 中实现 1：7 的解串行化

# November 1st 2006

# Timespec should be set to period plus an amount for jitter
# For example : pixel clock of 90 MHz => high speed clock of 315 MHz (3175 pS).
# 		From spreadsheet : jitter is 464 pS
# 		1/(3175 - (0.5*464)) => 340 MHz

net rxclk35 tnm = rxclk35 ;
net rxclk35not tnm = rxclk35not ;
net rxclk tnm = rxclk1 ;

timespec tsrx00 = period rxclk35 340 Mhz ;
timespec tsrx01 = period rxclk35not tsrx00 ;
timespec tsrx02 = period rxclk1 tsrx00/3.5 ;
timespec tsrx03 = from rxclk35 to rxclk1 = tsrx00/2 ;

# receive clock input 1, bank 0

net "rxclkina1_p" loc = "C11" ;		#	L21P_0
net "rxclkina1_n" loc = "B11" ;		# 	l21N_0

# channel A lvds inputs - Bank 3

net "dataina_p(4)"  loc = "E11" ;	# 	L22P_0
net "dataina_n(4)"  loc = "D11" ;	# 	L22N_0
net "dataina_p(3)"  loc = "A10" ;	# 	L24P_0
net "dataina_n(3)"  loc = "A9" ;	# 	L24N_0
net "dataina_p(2)"  loc = "C10" ;	# 	L25P_0
net "dataina_n(2)"  loc = "D10" ;	# 	L25N_0
net "dataina_p(1)"  loc = "B9" ;	# 	L28P_0
net "dataina_n(1)"  loc = "C9" ;	# 	L28N_0
net "dataina_p(0)"  loc = "A8" ;	# 	L30P_0
net "dataina_n(0)"  loc = "B8" ;	# 	L30N_0

set "rx0/hset" rloc_origin = "X42y144" ;

set "apa0/hset" rloc_origin = "X66Y150" ;					# Delete or comment this line if auto phase alignment is not being used

timespec tsapa00 = from ffs(apa0/chfoundc) to ffs(apa0/sm) = tsrx00/2 ;		# Delete or comment this line if auto phase alignment is not being used