audio_dac_fifo.v

altera的ip核

module AUDIO_DAC_FIFO (	//	FIFO Side
						iDATA,iWR,iWR_CLK,
						oDATA,
						//	Audio Side
						oAUD_BCK,
						oAUD_DATA,
						oAUD_LRCK,
						oAUD_XCK,
						//	Control Signals
					    iCLK_18_4,
						iRST_N	);				

parameter	REF_CLK			=	18432000;	//	18.432	MHz
parameter	SAMPLE_RATE		=	48000;		//	48		KHz
parameter	DATA_WIDTH		=	16;			//	16		Bits
parameter	CHANNEL_NUM		=	2;			//	Dual Channel

//	FIFO Side
input	[DATA_WIDTH-1:0]	iDATA;
input						iWR;
input						iWR_CLK;
output	[DATA_WIDTH-1:0]	oDATA;
wire	[DATA_WIDTH-1:0]	mDATA;
reg							mDATA_RD;
//	Audio Side
output	oAUD_DATA;
output	oAUD_LRCK;
output	oAUD_BCK;
output	oAUD_XCK;
reg		oAUD_BCK;
//	Control Signals
input	iCLK_18_4;
input	iRST_N;
//	Internal Registers and Wires
reg		[3:0]	BCK_DIV;
reg		[8:0]	LRCK_1X_DIV;
reg		[7:0]	LRCK_2X_DIV;
reg		[3:0]	SEL_Cont;
////////////////////////////////////
reg		[DATA_WIDTH-1:0]	DATA_Out;
reg		[DATA_WIDTH-1:0]	DATA_Out_Tmp;
reg							LRCK_1X;
reg							LRCK_2X;

FIFO_16_256 	u0	(	.data(iDATA),.wrreq(iWR),
						.rdreq(mDATA_RD),.rdclk(iCLK_18_4),
						.wrclk(iWR_CLK),.aclr(~iRST_N),
						.q(mDATA),.wrfull(oDATA[0]));
assign	oAUD_XCK	=	~iCLK_18_4;

////////////	AUD_BCK Generator	//////////////
always@(posedge iCLK_18_4 or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		BCK_DIV		<=	0;
		oAUD_BCK	<=	0;
	end
	else
	begin
		if(BCK_DIV >= REF_CLK/(SAMPLE_RATE*DATA_WIDTH*CHANNEL_NUM*2)-1 )
		begin
			BCK_DIV		<=	0;
			oAUD_BCK	<=	~oAUD_BCK;
		end
		else
		BCK_DIV		<=	BCK_DIV+1;
	end
end
//////////////////////////////////////////////////
////////////	AUD_LRCK Generator	//////////////
always@(posedge iCLK_18_4 or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		LRCK_1X_DIV	<=	0;
		LRCK_2X_DIV	<=	0;
		LRCK_1X		<=	0;
		LRCK_2X		<=	0;
	end
	else
	begin
		//	LRCK 1X
		if(LRCK_1X_DIV >= REF_CLK/(SAMPLE_RATE*2)-1 )
		begin
			LRCK_1X_DIV	<=	0;
			LRCK_1X	<=	~LRCK_1X;
		end
		else
		LRCK_1X_DIV		<=	LRCK_1X_DIV+1;
		//	LRCK 2X
		if(LRCK_2X_DIV >= REF_CLK/(SAMPLE_RATE*4)-1 )
		begin
			LRCK_2X_DIV	<=	0;
			LRCK_2X	<=	~LRCK_2X;
		end
		else
		LRCK_2X_DIV		<=	LRCK_2X_DIV+1;		
	end
end
assign	oAUD_LRCK	=	LRCK_1X;
//////////////////////////////////////////////////
//////////	Read Signal Generator	//////////////
always@(posedge iCLK_18_4 or negedge iRST_N)
begin
	if(!iRST_N)
	begin
		mDATA_RD	<=	0;
	end
	else
	begin
		if(LRCK_1X_DIV == REF_CLK/(SAMPLE_RATE*2)-1 )
		mDATA_RD	<=	1;
		else
		mDATA_RD	<=	0;
	end
end
//////////////////////////////////////////////////
//////////////	  DATA Latch	//////////////////
always@(posedge iCLK_18_4 or negedge iRST_N)
begin
	if(!iRST_N)
	DATA_Out_Tmp	<=	0;
	else
	begin
		if(LRCK_2X_DIV == REF_CLK/(SAMPLE_RATE*4)-1 )
		DATA_Out_Tmp	<=	mDATA;
	end
end
always@(posedge iCLK_18_4 or negedge iRST_N)
begin
	if(!iRST_N)
	DATA_Out	<=	0;
	else
	begin
		if(LRCK_2X_DIV == REF_CLK/(SAMPLE_RATE*4)-3 )
		DATA_Out	<=	DATA_Out_Tmp;
	end
end
//////////////////////////////////////////////////
//////////	16 Bits PISO MSB First	//////////////
always@(negedge oAUD_BCK or negedge iRST_N)
begin
	if(!iRST_N)
	SEL_Cont	<=	0;
	else
	SEL_Cont	<=	SEL_Cont+1;
end
assign	oAUD_DATA	=	DATA_Out[~SEL_Cont];											
//////////////////////////////////////////////////

endmodule