📄 ddr_sdram.srr
字号:
Required
Instance Type Pin Net Time Slack
---------------------------------------------------------------------------------------
control1.load_reg1 apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
control1.load_reg2 apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[0] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[1] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[2] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[3] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[4] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[5] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[6] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
data_path4.DATAOUT[7] apex20k_lcell_ff ena RESET_N_c 4.1 -7.7
=======================================================================================
Clock - clk100_inferred_clock [rising] : Printing a critical path for every start point reported above
A Critical Path with worst case slack = -7.7 ns:
The start and the end point of this path are clocked by the clk100_inferred_clock [rising]
Instance/Net Pin Pin Arrival Delta Fan
Name Type Name Dir Time Delay Out
---------------------------------------------------------------------------------------------
RESET_N Port RESET_N Out 0.0 0.0
RESET_N_in_in Net 1
RESET_N_in apex20k_io padio In 0.3
RESET_N_in apex20k_io combout Out 11.8 11.5
RESET_N_c Net 348
data_path1.DATAOUT[31] apex20k_lcell_ff ena In 11.8
=============================================================================================
Setup requirement on this path is 0.9 ns.
Detailed Timing Report for clock : clk200_inferred_clock
*******************************************
Requested Period 5.0 ns
Estimated Period 8.2 ns
Worst Slack -3.2 ns
Start Points for Paths with Slack Worse than -2.5 ns :
Arrival
Instance Type Pin Net Time Slack
-------------------------------------------------------------------------------------------------
data_path4.DQOE apex20k_lcell_ff regout data_path4.DQOE 7.8 -3.2
data_path1.DQOUT[0] apex20k_lcell_ff regout data_path1.DQOUT[0] 5.4 -3.1
data_path1.DQOUT[1] apex20k_lcell_ff regout data_path1.DQOUT[1] 5.4 -3.1
data_path1.DQOUT[2] apex20k_lcell_ff regout data_path1.DQOUT[2] 5.4 -3.1
data_path1.DQOUT[3] apex20k_lcell_ff regout data_path1.DQOUT[3] 5.4 -3.1
data_path1.DQOUT[4] apex20k_lcell_ff regout data_path1.DQOUT[4] 5.4 -3.1
data_path1.DQOUT[5] apex20k_lcell_ff regout data_path1.DQOUT[5] 5.4 -3.1
data_path1.DQOUT[6] apex20k_lcell_ff regout data_path1.DQOUT[6] 5.4 -3.1
data_path1.DQOUT[7] apex20k_lcell_ff regout data_path1.DQOUT[7] 5.4 -3.1
data_path1.DQOUT[8] apex20k_lcell_ff regout data_path1.DQOUT[8] 5.4 -3.1
=================================================================================================
End Points for Paths with Slack Worse than -2.5 ns :
Required
Instance Type Pin Net Time Slack
------------------------------------------------------------------------------------------
data_path4.hi_lo apex20k_lcell_ff dataa data_path4.DQOE 4.6 -3.2
data_path3.hi_lo apex20k_lcell_ff dataa data_path4.DQOE 4.6 -3.2
data_path2.hi_lo apex20k_lcell_ff dataa data_path4.DQOE 4.6 -3.2
data_path1.hi_lo apex20k_lcell_ff dataa data_path4.DQOE 4.6 -3.2
DQ[63:0] Port DQ[0] dq_tri_tri[0] 5.0 -3.1
DQ[63:0] Port DQ[1] dq_tri_tri[1] 5.0 -3.1
DQ[63:0] Port DQ[2] dq_tri_tri[2] 5.0 -3.1
DQ[63:0] Port DQ[3] dq_tri_tri[3] 5.0 -3.1
DQ[63:0] Port DQ[4] dq_tri_tri[4] 5.0 -3.1
DQ[63:0] Port DQ[5] dq_tri_tri[5] 5.0 -3.1
==========================================================================================
Clock - clk200_inferred_clock [rising] : Printing a critical path for every start point reported above
A Critical Path with worst case slack = -3.2 ns:
The start point of this path has a clock (clk100_inferred_clock [falling]) that has an offset of 0.0ns with
respect to the start of the period of the destination clock (clk200_inferred_clock [rising])
Instance/Net Pin Pin Arrival Delta Fan
Name Type Name Dir Time Delay Out
--------------------------------------------------------------------------------------
data_path4.DQOE apex20k_lcell_ff regout Out 7.8 7.8
data_path4.DQOE Net 68
data_path1.hi_lo apex20k_lcell_ff dataa In 7.8
======================================================================================
Setup requirement on this path is 0.4 ns.
A Critical Path with worst case slack = -3.1 ns:
The start point of this path has a clock (clk200_inferred_clock [rising]) that has an offset of 2.5ns with
respect to the start of the period of the destination clock (clk200_inferred_clock [falling])
Instance/Net Pin Pin Arrival Delta Fan
Name Type Name Dir Time Delay Out
-----------------------------------------------------------------------------------------
data_path1.DQOUT[0] apex20k_lcell_ff regout Out 5.4 2.9
data_path1.DQOUT[0] Net 1
DQ_tri[0] apex20k_io datain In 5.4
DQ_tri[0] apex20k_io padio Out 8.4 3.0
dq_tri_tri[0] Net 2
DQ[63:0] Port DQ[0] In 8.1
=========================================================================================
This path has no setup requirement
A Critical Path with worst case slack = -3.1 ns:
The start point of this path has a clock (clk200_inferred_clock [rising]) that has an offset of 2.5ns with
respect to the start of the period of the destination clock (clk200_inferred_clock [falling])
Instance/Net Pin Pin Arrival Delta Fan
Name Type Name Dir Time Delay Out
-----------------------------------------------------------------------------------------
data_path1.DQOUT[1] apex20k_lcell_ff regout Out 5.4 2.9
data_path1.DQOUT[1] Net 1
DQ_tri[1] apex20k_io datain In 5.4
DQ_tri[1] apex20k_io padio Out 8.4 3.0
dq_tri_tri[1] Net 2
DQ[63:0] Port DQ[1] In 8.1
=========================================================================================
This path has no setup requirement
A Critical Path with worst case slack = -3.1 ns:
The start point of this path has a clock (clk200_inferred_clock [rising]) that has an offset of 2.5ns with
respect to the start of the period of the destination clock (clk200_inferred_clock [falling])
Instance/Net Pin Pin Arrival Delta Fan
Name Type Name Dir Time Delay Out
-----------------------------------------------------------------------------------------
data_path1.DQOUT[2] apex20k_lcell_ff regout Out 5.4 2.9
data_path1.DQOUT[2] Net 1
DQ_tri[2] apex20k_io datain In 5.4
DQ_tri[2] apex20k_io padio Out 8.4 3.0
dq_tri_tri[2] Net 2
DQ[63:0] Port DQ[2] In 8.1
=========================================================================================
This path has no setup requirement
A Critical P
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -