📄 count10.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.2 07/10/2002
-- Compiled: 04/24/2007 11:29:01
-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "count10"
BEGIN
DEVICE = "EP1K30TC144-3";
"clk" : INPUT_PIN = 55 ;
"clr" : INPUT_PIN = 56 ;
"en" : INPUT_PIN = 54 ;
"cout" : OUTPUT_PIN = 98 ;
"out0" : OUTPUT_PIN = 116 ;
"out1" : OUTPUT_PIN = 10 ;
"out2" : OUTPUT_PIN = 112 ;
"out3" : OUTPUT_PIN = 111 ;
"out4" : OUTPUT_PIN = 68 ;
"out5" : OUTPUT_PIN = 100 ;
"out6" : OUTPUT_PIN = 91 ;
"out7" : OUTPUT_PIN = 64 ;
"out8" : OUTPUT_PIN = 21 ;
"out9" : OUTPUT_PIN = 19 ;
"out10" : OUTPUT_PIN = 23 ;
"out11" : OUTPUT_PIN = 22 ;
"out12" : OUTPUT_PIN = 79 ;
"out13" : OUTPUT_PIN = 80 ;
"out14" : OUTPUT_PIN = 81 ;
"out15" : OUTPUT_PIN = 82 ;
"out16" : OUTPUT_PIN = 32 ;
"out17" : OUTPUT_PIN = 31 ;
"out18" : OUTPUT_PIN = 30 ;
"out19" : OUTPUT_PIN = 33 ;
"out20" : OUTPUT_PIN = 17 ;
"out21" : OUTPUT_PIN = 18 ;
"out22" : OUTPUT_PIN = 12 ;
"out23" : OUTPUT_PIN = 13 ;
"out24" : OUTPUT_PIN = 39 ;
"out25" : OUTPUT_PIN = 141 ;
"out26" : OUTPUT_PIN = 133 ;
"out27" : OUTPUT_PIN = 136 ;
"out28" : OUTPUT_PIN = 109 ;
"out29" : OUTPUT_PIN = 99 ;
"out30" : OUTPUT_PIN = 118 ;
"out31" : OUTPUT_PIN = 9 ;
"|lpm_add_sub:557|addcore:adder|:55" : LOCATION = LC6_B3 ;
"|lpm_add_sub:558|addcore:adder|:55" : LOCATION = LC7_B12;
"|lpm_add_sub:559|addcore:adder|:55" : LOCATION = LC7_D26;
"|lpm_add_sub:560|addcore:adder|:55" : LOCATION = LC7_F16;
"|lpm_add_sub:561|addcore:adder|:55" : LOCATION = LC5_F34;
"|lpm_add_sub:562|addcore:adder|:55" : LOCATION = LC7_C28;
"|lpm_add_sub:563|addcore:adder|:55" : LOCATION = LC5_B21;
"|lpm_add_sub:564|addcore:adder|:55" : LOCATION = LC6_B15;
":40" : LOCATION = LC1_B3 ;
":57" : LOCATION = LC7_B3 ;
"~57~1" : LOCATION = LC5_B1 ;
":58" : LOCATION = LC3_B3 ;
":59" : LOCATION = LC2_B34;
":78" : LOCATION = LC8_B3 ;
":79" : LOCATION = LC5_B3 ;
":80" : LOCATION = LC3_B34;
":81" : LOCATION = LC1_B7 ;
":93" : LOCATION = LC5_B7 ; -- cout1
":97" : LOCATION = LC5_B12;
":114" : LOCATION = LC8_B12;
"~114~1" : LOCATION = LC2_B12;
":115" : LOCATION = LC6_B12;
":116" : LOCATION = LC7_B7 ;
":135" : LOCATION = LC4_B12;
":136" : LOCATION = LC3_B12;
":137" : LOCATION = LC3_B7 ;
":138" : LOCATION = LC2_B7 ;
":150" : LOCATION = LC1_B12; -- cout2
":154" : LOCATION = LC2_D26;
":171" : LOCATION = LC8_D26;
"~171~1" : LOCATION = LC6_D27;
":172" : LOCATION = LC6_D26;
":173" : LOCATION = LC5_D26;
":192" : LOCATION = LC1_D26; -- out33
":193" : LOCATION = LC4_D26; -- out32
":194" : LOCATION = LC3_D26;
":195" : LOCATION = LC5_D27;
":207" : LOCATION = LC2_D27; -- cout3
":211" : LOCATION = LC1_F16;
":228" : LOCATION = LC8_F16;
"~228~1" : LOCATION = LC6_F16;
":229" : LOCATION = LC4_F16;
":230" : LOCATION = LC3_F3 ;
":249" : LOCATION = LC5_F16; -- out43
":250" : LOCATION = LC3_F16; -- out42
":251" : LOCATION = LC2_F3 ; -- out41
":252" : LOCATION = LC1_F3 ; -- out40
":264" : LOCATION = LC2_F16; -- cout4
":268" : LOCATION = LC3_F34;
":285" : LOCATION = LC7_F34;
"~285~1" : LOCATION = LC6_F34;
":286" : LOCATION = LC4_F34;
":287" : LOCATION = LC4_F24;
":306" : LOCATION = LC8_F34; -- out53
":307" : LOCATION = LC2_F34; -- out52
":308" : LOCATION = LC3_F24; -- out51
":309" : LOCATION = LC1_F24; -- out50
":321" : LOCATION = LC1_F34; -- cout5
":325" : LOCATION = LC3_C28;
":342" : LOCATION = LC8_C28;
"~342~1" : LOCATION = LC1_C28;
":343" : LOCATION = LC6_C28;
":344" : LOCATION = LC3_C31;
":363" : LOCATION = LC5_C28; -- out63
":364" : LOCATION = LC4_C28; -- out62
":365" : LOCATION = LC2_C31; -- out61
":366" : LOCATION = LC1_C31; -- out60
":378" : LOCATION = LC2_C28; -- cout6
":382" : LOCATION = LC2_B21;
":399" : LOCATION = LC6_B21;
"~399~1" : LOCATION = LC1_B21;
":400" : LOCATION = LC3_B21;
":401" : LOCATION = LC7_B34;
":420" : LOCATION = LC8_B21; -- out73
":421" : LOCATION = LC4_B21; -- out72
":422" : LOCATION = LC6_B34; -- out71
":423" : LOCATION = LC8_B34; -- out70
":435" : LOCATION = LC7_B21; -- cout7
":439" : LOCATION = LC8_B15;
":456" : LOCATION = LC7_B15;
"~456~1" : LOCATION = LC3_B1 ;
":457" : LOCATION = LC5_B15;
":458" : LOCATION = LC1_B15;
":477" : LOCATION = LC2_B15; -- out83
":478" : LOCATION = LC4_B15; -- out82
":479" : LOCATION = LC3_B15; -- out81
":480" : LOCATION = LC4_B1 ; -- out80
":513" : LOCATION = LC2_B22;
":514" : LOCATION = LC1_B9 ;
":515" : LOCATION = LC3_B17;
":516" : LOCATION = LC1_B1 ;
":517" : LOCATION = LC2_B29;
":518" : LOCATION = LC1_B28;
":519" : LOCATION = LC4_B34;
":520" : LOCATION = LC1_B34;
":521" : LOCATION = LC3_C33;
":522" : LOCATION = LC2_C27;
":523" : LOCATION = LC7_C31;
":524" : LOCATION = LC6_C31;
":525" : LOCATION = LC7_F19;
":526" : LOCATION = LC1_F20;
":527" : LOCATION = LC2_F24;
":528" : LOCATION = LC5_F24;
":529" : LOCATION = LC1_F4 ;
":530" : LOCATION = LC2_F1 ;
":531" : LOCATION = LC4_F3 ;
":532" : LOCATION = LC6_F3 ;
":533" : LOCATION = LC6_D21;
":534" : LOCATION = LC7_D35;
":535" : LOCATION = LC1_D24;
":536" : LOCATION = LC4_D27;
":537" : LOCATION = LC2_B10;
":538" : LOCATION = LC2_D18;
":539" : LOCATION = LC8_B7 ;
":540" : LOCATION = LC4_B7 ;
":541" : LOCATION = LC2_B3 ;
":542" : LOCATION = LC4_B3 ;
":543" : LOCATION = LC5_B34;
":544" : LOCATION = LC6_B7 ;
":556" : LOCATION = LC6_B1 ;
END;
INTERNAL_INFO "count10"
BEGIN
DEVICE = EP1K30TC144-3;
OD5P55 : LORAX = "1:FB5->LC8_B3,->LC5_B3,->LC3_B34,->LC1_B7,->LC5_B7,->LC2_B22,->LC1_B9,->LC3_B17,->LC1_B1,->LC2_B29,->LC1_B28,->LC4_B34,->LC1_B34,->LC3_C33,->LC2_C27,->LC7_C31,->LC6_C31,->LC7_F19,->LC1_F20,->LC2_F24,->LC5_F24,->LC1_F4,->LC2_F1,->LC4_F3,->LC6_F3,->LC6_D21,->LC7_D35,->LC1_D24,->LC4_D27,->LC2_B10,->LC2_D18,->LC8_B7,->LC4_B7,->LC2_B3,->LC4_B3,->LC5_B34,->LC6_B7|";
OD3P56 : LORAX = "1:FB3|2:FH3R1|3:PA8R1C0->LC4_B1,->LC6_B1|,3:PA8R1C2->LC8_B3,->LC5_B3|,3:PA8R1C6->LC1_B7,->LC5_B7,->LC3_B7,->LC2_B7|,3:PA8R1C11->LC4_B12,->LC3_B12,->LC1_B12|,3:PA8R1C14->LC2_B15,->LC4_B15,->LC3_B15|,3:PA8R1C20->LC8_B21,->LC4_B21,->LC7_B21|,3:PA8R1C33->LC3_B34,->LC6_B34,->LC8_B34||,2:FH3R2|3:PA8R2C27->LC5_C28,->LC4_C28,->LC2_C28|,3:PA8R2C30->LC2_C31,->LC1_C31||,2:FH3R3|3:PA8R3C25->LC1_D26,->LC4_D26,->LC3_D26|,3:PA8R3C26->LC5_D27,->LC2_D27||,2:FH3R5|3:PA8R5C2->LC2_F3,->LC1_F3|,3:PA8R5C15->LC5_F16,->LC3_F16,->LC2_F16|,3:PA8R5C23->LC3_F24,->LC1_F24|,3:PA8R5C33->LC8_F34,->LC2_F34,->LC1_F34|||";
OD2P54 : LORAX = "1:FB2|2:FH2R1|3:PA6R1C0->LC5_B1,->LC3_B1,->LC4_B1,->LC6_B1|,3:PA6R1C2->LC8_B3,->LC5_B3|,3:PA6R1C6->LC1_B7,->LC5_B7,->LC3_B7,->LC2_B7|,3:PA6R1C11->LC2_B12,->LC4_B12,->LC3_B12,->LC1_B12|,3:PA6R1C14->LC2_B15,->LC4_B15,->LC3_B15|,3:PA6R1C20->LC1_B21,->LC8_B21,->LC4_B21,->LC7_B21|,3:PA6R1C33->LC3_B34,->LC6_B34,->LC8_B34||,2:FH2R2|3:PA6R2C27->LC1_C28,->LC5_C28,->LC4_C28,->LC2_C28|,3:PA6R2C30->LC2_C31,->LC1_C31||,2:FH2R3|3:PA6R3C25->LC1_D26,->LC4_D26,->LC3_D26|,3:PA6R3C26->LC6_D27,->LC5_D27,->LC2_D27||,2:FH2R5|3:PA6R5C2->LC2_F3,->LC1_F3|,3:PA6R5C15->LC6_F16,->LC5_F16,->LC3_F16,->LC2_F16|,3:PA6R5C23->LC3_F24,->LC1_F24|,3:PA6R5C33->LC6_F34,->LC8_F34,->LC2_F34,->LC1_F34|||";
LC1_B3 : LORAX = "1:MSW0R1C2,G62R1|2:PA9R1C0->LC5_B1|,2:PA9R1C6->LC5_B7||";
LC5_B1 : LORAX = "1:MSW4R1C0,G130R1|2:PA16R1C33->LC2_B34|,2:PA16R1C2->LC7_B3,->LC3_B3||";
LC3_B34 : LORAX = "1:MSW2R1C33,G36R1,PA3R1C2->LC6_B3,->LC1_B3,->LC3_B3|";
LC1_B7 : LORAX = "1:MSW0R1C6,G67R1|2:PA1R1C33->LC2_B34|,2:PA1R1C2->LC6_B3,->LC1_B3,->LC3_B3||";
LC5_B7 : LORAX = "1:MSW4R1C6,G122R1,PA0R1C11->LC4_B12,->LC3_B12,->LC1_B12|";
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -