📄 ps2.mrp
字号:
Release 7.1.04i Map H.42Xilinx Mapping Report File for Design 'ps2'Design Information------------------Command Line : D:/Xilinx/bin/nt/map.exe -ise
e:\cindy\working\ue_extboard\sp3\vhdl\ps2\PS2.ise -intstyle ise -p
xc3s400-pq208-4 -cm area -pr b -k 4 -c 100 -o ps2_map.ncd ps2.ngd ps2.pcf Target Device : xc3s400Target Package : pq208Target Speed : -4Mapper Version : spartan3 -- $Revision: 1.26.6.4 $Mapped Date : Wed Feb 22 15:08:01 2006Design Summary--------------Number of errors: 0Number of warnings: 0Logic Utilization: Number of Slice Flip Flops: 19 out of 7,168 1% Number of 4 input LUTs: 22 out of 7,168 1%Logic Distribution: Number of occupied Slices: 22 out of 3,584 1% Number of Slices containing only related logic: 22 out of 22 100% Number of Slices containing unrelated logic: 0 out of 22 0% *See NOTES below for an explanation of the effects of unrelated logicTotal Number of 4 input LUTs: 22 out of 7,168 1% Number of bonded IOBs: 18 out of 141 12% IOB Flip Flops: 1 Number of GCLKs: 1 out of 8 12%Total equivalent gate count for design: 295Additional JTAG gate count for IOBs: 864Peak Memory Usage: 101 MBNOTES: Related logic is defined as being logic that shares connectivity - e.g. two LUTs are "related" if they share common inputs. When assembling slices, Map gives priority to combine logic that is related. Doing so results in the best timing performance. Unrelated logic shares no connectivity. Map will only begin packing unrelated logic into a slice once 99% of the slices are occupied through related logic packing. Note that once logic distribution reaches the 99% level through related logic packing, this does not mean the device is completely utilized. Unrelated logic packing will then begin, continuing until all usable LUTs and FFs are occupied. Depending on your timing budget, increased levels of unrelated logic packing may adversely affect the overall timing performance of your design.Table of Contents-----------------Section 1 - ErrorsSection 2 - WarningsSection 3 - InformationalSection 4 - Removed Logic SummarySection 5 - Removed LogicSection 6 - IOB PropertiesSection 7 - RPMsSection 8 - Guide ReportSection 9 - Area Group SummarySection 10 - Modular Design SummarySection 11 - Timing ReportSection 12 - Configuration String InformationSection 13 - Additional Device Resource CountsSection 1 - Errors------------------Section 2 - Warnings--------------------Section 3 - Informational-------------------------INFO:MapLib:562 - No environment variables are currently set.INFO:MapLib:535 - The following Virtex BUFG(s) is/are being retargetted to
Virtex2 BUFGMUX(s) with input tied to I0 and Select pin tied to constant 0: BUFGP symbol "kb_clk_BUFGP" (output signal=kb_clk_BUFGP)INFO:LIT:244 - All of the single ended outputs in this design are using slew
rate limited output drivers. The delay on speed critical single ended outputs
can be dramatically reduced by designating them as fast outputs in the
schematic.Section 4 - Removed Logic Summary--------------------------------- 1 block(s) optimized awaySection 5 - Removed Logic-------------------------Optimized Block(s):TYPE BLOCKGND XST_GNDTo enable printing of redundant blocks removed and signals merged, set the
detailed map report option and rerun map.Section 6 - IOB Properties--------------------------+------------------------------------------------------------------------------------------------------------------------+| IOB Name | Type | Direction | IO Standard | Drive | Slew | Reg (s) | Resistor | IOB || | | | | Strength | Rate | | | Delay |+------------------------------------------------------------------------------------------------------------------------+| dataout<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<4> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<5> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || dataout<6> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || en | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || kb_clk | IOB | INPUT | LVCMOS25 | | | | | || kb_data | IOB | INPUT | LVCMOS25 | | | INFF1 | | IFD || led<0> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<1> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<2> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<3> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<4> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<5> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<6> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | || led<7> | IOB | OUTPUT | LVCMOS25 | 12 | SLOW | | | |+------------------------------------------------------------------------------------------------------------------------+Section 7 - RPMs----------------Section 8 - Guide Report------------------------Guide not run on this design.Section 9 - Area Group Summary------------------------------No area groups were found in this design.Section 10 - Modular Design Summary-----------------------------------Modular Design not used for this design.Section 11 - Timing Report--------------------------This design was not run using timing mode.Section 12 - Configuration String Details--------------------------Use the "-detail" map option to print out Configuration StringsSection 13 - Additional Device Resource Counts----------------------------------------------Number of JTAG Gates for IOBs = 18Number of Equivalent Gates for Design = 295Number of RPM Macros = 0Number of Hard Macros = 0DCIRESETs = 0CAPTUREs = 0BSCANs = 0STARTUPs = 0DCMs = 0GCLKs = 1ICAPs = 018X18 Multipliers = 0Block RAMs = 0Total Registers (Flops & Latches in Slices & IOBs) not driven by LUTs = 20IOB Dual-Rate Flops not driven by LUTs = 0IOB Dual-Rate Flops = 0IOB Slave Pads = 0IOB Master Pads = 0IOB Latches not driven by LUTs = 0IOB Latches = 0IOB Flip Flops not driven by LUTs = 1IOB Flip Flops = 1Unbonded IOBs = 0Bonded IOBs = 18XORs = 0CARRY_INITs = 0CARRY_SKIPs = 0CARRY_MUXes = 0Shift Registers = 0Static Shift Registers = 0Dynamic Shift Registers = 016x1 ROMs = 016x1 RAMs = 032x1 RAMs = 0Dual Port RAMs = 0MUXFs = 0MULT_ANDs = 04 input LUTs used as Route-Thrus = 04 input LUTs = 22Slice Latches not driven by LUTs = 0Slice Latches = 0Slice Flip Flops not driven by LUTs = 19Slice Flip Flops = 19SliceMs = 0SliceLs = 22Slices = 22F6 Muxes = 0F5 Muxes = 0F8 Muxes = 0F7 Muxes = 0Number of LUT signals with 4 loads = 2Number of LUT signals with 3 loads = 3Number of LUT signals with 2 loads = 3Number of LUT signals with 1 load = 14NGM Average fanout of LUT = 1.68NGM Maximum fanout of LUT = 4NGM Average fanin for LUT = 3.5455Number of LUT symbols = 22⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -