__projnav.log

vhdl经典实例——信号灯控制

Mapping all equations...
Building and optimizing final netlist ...
Found area constraint ratio of 100 (+ 5) on block buzzer, actual ratio is 1.

=========================================================================
*                            Final Report                               *
=========================================================================

Device utilization summary:
---------------------------

Selected Device : 3s400pq208-4 

 Number of Slices:                      62  out of   3584     1%  
 Number of Slice Flip Flops:            43  out of   7168     0%  
 Number of 4 input LUTs:               112  out of   7168     1%  
 Number of bonded IOBs:                  3  out of    141     2%  
 Number of GCLKs:                        1  out of      8    12%  


=========================================================================
TIMING REPORT


Clock Information:
------------------
-----------------------------------+------------------------+-------+
Clock Signal                       | Clock buffer(FF name)  | Load  |
-----------------------------------+------------------------+-------+
clk                                | BUFGP                  | 43    |
-----------------------------------+------------------------+-------+

Timing Summary:
---------------
Speed Grade: -4

   Minimum period: 9.671ns (Maximum Frequency: 103.402MHz)
   Minimum input arrival time before clock: No path found
   Maximum output required time after clock: 7.241ns
   Maximum combinational path delay: No path found

=========================================================================




Started process "Translate".


Command Line: ngdbuild -intstyle ise -dd
e:\cindy\working\ue_extboard\buzzer/_ngo -nt timestamp -uc buzzer.ucf -p
xc3s400-pq208-4 buzzer.ngc buzzer.ngd 

Reading NGO file 'E:/Cindy/working/UE_EXTBOARD/buzzer/buzzer.ngc' ...

Applying constraints in "buzzer.ucf" to the design...

Checking timing specifications ...
Checking expanded design ...

NGDBUILD Design Results Summary:
  Number of errors:     0
  Number of warnings:   0

Writing NGD file "buzzer.ngd" ...

Writing NGDBUILD log file "buzzer.bld"...

NGDBUILD done.




Started process "Map".

Using target part "3s400pq208-4".
Mapping design into LUTs...
Running directed packing...
Running delay-based LUT packing...
Running related packing...

Design Summary:
Number of errors:      0
Number of warnings:    0
Logic Utilization:
  Number of Slice Flip Flops:          43 out of   7,168    1%
  Number of 4 input LUTs:              81 out of   7,168    1%
Logic Distribution:
  Number of occupied Slices:                           60 out of   3,584    1%
    Number of Slices containing only related logic:      60 out of      60  100%
    Number of Slices containing unrelated logic:          0 out of      60    0%
      *See NOTES below for an explanation of the effects of unrelated logic
Total Number 4 input LUTs:            114 out of   7,168    1%
  Number used as logic:                 81
  Number used as a route-thru:          33
  Number of bonded IOBs:                3 out of     141    2%
  Number of GCLKs:                     1 out of       8   12%

Total equivalent gate count for design:  1,040
Additional JTAG gate count for IOBs:  144
Peak Memory Usage:  101 MB

NOTES:

   Related logic is defined as being logic that shares connectivity - e.g. two
   LUTs are "related" if they share common inputs.  When assembling slices,
   Map gives priority to combine logic that is related.  Doing so results in
   the best timing performance.

   Unrelated logic shares no connectivity.  Map will only begin packing
   unrelated logic into a slice once 99% of the slices are occupied through
   related logic packing.

   Note that once logic distribution reaches the 99% level through related
   logic packing, this does not mean the device is completely utilized.
   Unrelated logic packing will then begin, continuing until all usable LUTs
   and FFs are occupied.  Depending on your timing budget, increased levels of
   unrelated logic packing may adversely affect the overall timing performance
   of your design.

Mapping completed.
See MAP report file "buzzer_map.mrp" for details.




Started process "Place & Route".




Constraints file: buzzer.pcf.
Loading device for application Rf_Device from file '3s400.nph' in environment
D:/Xilinx.
   "buzzer" is an NCD, version 3.1, device xc3s400, package pq208, speed -4

Initializing temperature to 85.000 Celsius. (default - Range: 0.000 to 85.000
Celsius)
Initializing voltage to 1.140 Volts. (default - Range: 1.140 to 1.260 Volts)


Device speed data version:  "PRODUCTION 1.37 2005-07-22".


Device Utilization Summary:

   Number of BUFGMUXs                  1 out of 8      12%
   Number of External IOBs             3 out of 141     2%
      Number of LOCed IOBs             3 out of 3     100%

   Number of Slices                   60 out of 3584    1%
      Number of SLICEMs                0 out of 1792    0%



Overall effort level (-ol):   Standard (set by user)
Placer effort level (-pl):    Standard (set by user)
Placer cost table entry (-t): 1
Router effort level (-rl):    Standard (set by user)


Starting Placer

Phase 1.1
Phase 1.1 (Checksum:98976f) REAL time: 3 secs 

Phase 2.31
Phase 2.31 (Checksum:1312cfe) REAL time: 3 secs 

Phase 3.2
.


Phase 3.2 (Checksum:1c9c37d) REAL time: 3 secs 

Phase 4.8
...
Phase 4.8 (Checksum:99042f) REAL time: 3 secs 

Phase 5.5
Phase 5.5 (Checksum:2faf07b) REAL time: 3 secs 

Phase 6.18
Phase 6.18 (Checksum:39386fa) REAL time: 3 secs 

Phase 7.5
Phase 7.5 (Checksum:42c1d79) REAL time: 3 secs 

Writing design to file buzzer.ncd


Total REAL time to Placer completion: 3 secs 
Total CPU time to Placer completion: 2 secs 

Starting Router

Phase 1: 423 unrouted;       REAL time: 4 secs 

Phase 2: 399 unrouted;       REAL time: 4 secs 

Phase 3: 147 unrouted;       REAL time: 4 secs 

Phase 4: 0 unrouted;       REAL time: 4 secs 


Total REAL time to Router completion: 4 secs 
Total CPU time to Router completion: 3 secs 

Generating "PAR" statistics.

**************************
Generating Clock Report
**************************

+---------------------+--------------+------+------+------------+-------------+
|        Clock Net    |   Resource   |Locked|Fanout|Net Skew(ns)|Max Delay(ns)|
+---------------------+--------------+------+------+------------+-------------+
|           clk_BUFGP |      BUFGMUX1| No   |   23 |  0.020     |  1.034      |
+---------------------+--------------+------+------+------------+-------------+

Generating Pad Report.

All signals are completely routed.

Total REAL time to PAR completion: 5 secs 
Total CPU time to PAR completion: 3 secs 

Peak Memory Usage:  74 MB

Placement: Completed - No errors found.
Routing: Completed - No errors found.

Number of error messages: 0
Number of warning messages: 0
Number of info messages: 1

Writing design to file buzzer.ncd



PAR done!

Started process "Generate Post-Place & Route Static Timing".

Loading device for application Rf_Device from file '3s400.nph' in environment
D:/Xilinx.
   "buzzer" is an NCD, version 3.1, device xc3s400, package pq208, speed -4

Analysis completed Tue Feb 07 13:09:36 2006
--------------------------------------------------------------------------------

Generating Report ...

Number of warnings: 0
Total time: 4 secs 


Project Navigator Auto-Make Log File
-------------------------------------







Started process "Generate Programming File".



Project Navigator Auto-Make Log File
-------------------------------------







Started process "Generate Programming File".