system1.sim.rpt

用VHDL语言实现的控制DS18B20构成测温仪表的程序

; Detect setup and hold time violations                           ; Off     ; Off           ;
; Detect glitches                                                 ; Off     ; Off           ;
; Automatically save/load simulation netlist                      ; Off     ; Off           ;
; Disable timing delays in Timing Simulation                      ; Off     ; Off           ;
; Generate Signal Activity File                                   ; Off     ; Off           ;
; Group bus channels in simulation results                        ; Off     ; Off           ;
; Preserve fewer signal transitions to reduce memory requirements ; On      ; On            ;
; Overwrite Waveform Inputs With Simulation Outputs               ; Off     ;               ;
+-----------------------------------------------------------------+---------+---------------+


+----------------------+
; Simulation Waveforms ;
+----------------------+
Waveform report data cannot be output to ASCII.
Please use Quartus II to view the waveform report data.


+--------------------------------------------------------------------+
; Coverage Summary                                                   ;
+-----------------------------------------------------+--------------+
; Type                                                ; Value        ;
+-----------------------------------------------------+--------------+
; Total coverage as a percentage                      ;      49.92 % ;
; Total nodes checked                                 ; 559          ;
; Total output ports checked                          ; 631          ;
; Total output ports with complete 1/0-value coverage ; 315          ;
; Total output ports with no 1/0-value coverage       ; 205          ;
; Total output ports with no 1-value coverage         ; 289          ;
; Total output ports with no 0-value coverage         ; 232          ;
+-----------------------------------------------------+--------------+


The following table displays output ports that toggle between 1 and 0 during simulation.
+------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------+
; Complete 1/0-Value Coverage                                                                                                                                                                                                                                                  ;
+---------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------+------------------+
; Node Name                                                                                                           ; Output Port Name                                                                                                                    ; Output Port Type ;
+---------------------------------------------------------------------------------------------------------------------+-------------------------------------------------------------------------------------------------------------------------------------+------------------+
; |system1|led_convertor:display_component|clk_1k                                                                     ; |system1|led_convertor:display_component|clk_1k                                                                                     ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[12] ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[12]                 ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[11] ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[11]                 ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[11] ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[11]~COUT ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[10] ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[10]                 ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[10] ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[10]~COUT ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[9]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[9]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[9]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[9]~COUT  ; cout             ;
; |system1|rtl~813                                                                                                    ; |system1|rtl~813                                                                                                                    ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[8]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[8]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[8]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[8]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[7]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[7]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[7]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[7]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[6]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[6]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[6]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[6]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[5]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[5]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[5]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[5]~COUT  ; cout             ;
; |system1|rtl~814                                                                                                    ; |system1|rtl~814                                                                                                                    ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[0]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[0]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[0]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[0]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[4]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[4]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[4]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[4]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[3]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[3]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[3]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[3]~COUT  ; cout             ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[2]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[2]                  ; data_out0        ;
; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|q[2]  ; |system1|led_convertor:display_component|lpm_counter:\mydivider:temp0[0]_rtl_0|alt_counter_f10ke:wysi_counter|counter_cell[2]~COUT  ; cout             ;