clockdiv_translate.vhd

本程序以XILINX公司的ISE８.２为开发平台

--------------------------------------------------------------------------------
-- Copyright (c) 1995-2006 Xilinx, Inc.  All rights reserved.
--------------------------------------------------------------------------------
--   ____  ____
--  /   /\/   /
-- /___/  \  /    Vendor: Xilinx
-- \   \   \/     Version: I.31
--  \   \         Application: netgen
--  /   /         Filename: ClockDiv_translate.vhd
-- /___/   /\     Timestamp: Wed Jun 13 11:01:59 2007
-- \   \  /  \ 
--  \___\/\___\
--             
-- Command	: -intstyle ise -rpw 100 -tpw 0 -ar Structure -tm ClockDiv -w -dir netgen/translate -ofmt vhdl -sim ClockDiv.ngd ClockDiv_translate.vhd 
-- Device	: 2s200fg256-5
-- Input file	: ClockDiv.ngd
-- Output file	: D:\MY_DESIGN\ISE\LXJ\ClockDiv\netgen\translate\ClockDiv_translate.vhd
-- # of Entities	: 1
-- Design Name	: ClockDiv
-- Xilinx	: C:\Xilinx
--             
-- Purpose:    
--     This VHDL netlist is a verification model and uses simulation 
--     primitives which may not represent the true implementation of the 
--     device, however the netlist is functionally correct and should not 
--     be modified. This file cannot be synthesized and should only be used 
--     with supported simulation tools.
--             
-- Reference:  
--     Development System Reference Guide, Chapter 23
--     Synthesis and Simulation Design Guide, Chapter 6
--             
--------------------------------------------------------------------------------

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
library SIMPRIM;
use SIMPRIM.VCOMPONENTS.ALL;
use SIMPRIM.VPACKAGE.ALL;

entity ClockDiv is
  port (
    clk : in STD_LOGIC := 'X'; 
    reset : in STD_LOGIC := 'X'; 
    clkdiv : out STD_LOGIC 
  );
end ClockDiv;

architecture Structure of ClockDiv is
  signal clk_BUFGP : STD_LOGIC; 
  signal reset_IBUF_3 : STD_LOGIC; 
  signal clkdiv_OBUF_4 : STD_LOGIC; 
  signal Q_not0001 : STD_LOGIC; 
  signal N1 : STD_LOGIC; 
  signal N8 : STD_LOGIC; 
  signal clk_BUFGP_IBUFG_5 : STD_LOGIC; 
  signal VCC : STD_LOGIC; 
  signal GND : STD_LOGIC; 
  signal cnt : STD_LOGIC_VECTOR ( 3 downto 0 ); 
  signal Result : STD_LOGIC_VECTOR ( 3 downto 1 ); 
  signal Mcount_cnt_lut : STD_LOGIC_VECTOR ( 0 downto 0 ); 
begin
  XST_VCC : X_ONE
    port map (
      O => N1
    );
  clkdiv_0 : X_SFF
    generic map(
      INIT => '0'
    )
    port map (
      I => N1,
      SRST => Q_not0001,
      CLK => clk_BUFGP,
      O => clkdiv_OBUF_4,
      CE => VCC,
      SET => GND,
      RST => GND,
      SSET => GND
    );
  cnt_0 : X_FF
    generic map(
      INIT => '0'
    )
    port map (
      I => Mcount_cnt_lut(0),
      RST => reset_IBUF_3,
      CLK => clk_BUFGP,
      O => cnt(0),
      CE => VCC,
      SET => GND
    );
  cnt_1 : X_FF
    generic map(
      INIT => '0'
    )
    port map (
      I => Result(1),
      RST => reset_IBUF_3,
      CLK => clk_BUFGP,
      O => cnt(1),
      CE => VCC,
      SET => GND
    );
  cnt_2 : X_FF
    generic map(
      INIT => '0'
    )
    port map (
      I => Result(2),
      RST => reset_IBUF_3,
      CLK => clk_BUFGP,
      O => cnt(2),
      CE => VCC,
      SET => GND
    );
  cnt_3 : X_FF
    generic map(
      INIT => '0'
    )
    port map (
      I => Result(3),
      RST => reset_IBUF_3,
      CLK => clk_BUFGP,
      O => cnt(3),
      CE => VCC,
      SET => GND
    );
  Mcount_cnt_xor_2_11 : X_LUT3
    generic map(
      INIT => X"6A"
    )
    port map (
      ADR0 => cnt(2),
      ADR1 => cnt(1),
      ADR2 => cnt(0),
      O => Result(2)
    );
  Mcount_cnt_xor_1_11 : X_LUT4
    generic map(
      INIT => X"6466"
    )
    port map (
      ADR0 => cnt(0),
      ADR1 => cnt(1),
      ADR2 => cnt(2),
      ADR3 => cnt(3),
      O => Result(1)
    );
  Mcount_cnt_xor_3_11 : X_LUT4
    generic map(
      INIT => X"6CC4"
    )
    port map (
      ADR0 => cnt(0),
      ADR1 => cnt(3),
      ADR2 => cnt(1),
      ADR3 => cnt(2),
      O => Result(3)
    );
  Q_not00011 : X_LUT4
    generic map(
      INIT => X"FFBF"
    )
    port map (
      ADR0 => cnt(1),
      ADR1 => cnt(3),
      ADR2 => cnt(0),
      ADR3 => cnt(2),
      O => Q_not0001
    );
  reset_IBUF : X_BUF
    port map (
      I => reset,
      O => reset_IBUF_3
    );
  Mcount_cnt_lut_0_1_INV_0 : X_INV
    port map (
      I => cnt(0),
      O => Mcount_cnt_lut(0)
    );
  XST_GND : X_ZERO
    port map (
      O => N8
    );
  clk_BUFGP_BUFG : X_CKBUF
    port map (
      I => clk_BUFGP_IBUFG_5,
      O => clk_BUFGP
    );
  clk_BUFGP_IBUFG : X_CKBUF
    port map (
      I => clk,
      O => clk_BUFGP_IBUFG_5
    );
  clkdiv_OBUF : X_OBUF
    port map (
      I => clkdiv_OBUF_4,
      O => clkdiv
    );
  NlwBlock_ClockDiv_VCC : X_ONE
    port map (
      O => VCC
    );
  NlwBlock_ClockDiv_GND : X_ZERO
    port map (
      O => GND
    );
  NlwBlockROC : X_ROC
    generic map (ROC_WIDTH => 100 ns)
    port map (O => GSR);
  NlwBlockTOC : X_TOC
    port map (O => GTS);

end Structure;