ccdout.pad

CCD信号由于其特殊性,一般不能有信号源产生,本程序采用VHDL语言

Release 8.1i - Fit I.31
Copyright(c) 1995-2003 Xilinx Inc. All rights reserved

 6-11-2007  9:02PM

NOTE: This file is designed to be imported into a spreadsheet program
such as Microsoft Excel for viewing, printing and sorting. The pipe '|'
character is used as the data field separator.
This file is also designed to support parsing.

Input file:  CCDOUT.ngd
output file: CCDOUT.pad
Part type:   xa2c32a
Speed grade: -6
Package:     vq44

Pinout by Pin Number:

-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|
Pin Number|Signal Name|Pin Usage|Pin Name|Direction|IO Standard|IO Bank Number|{blank}|Slew Rate|Termination|{blank}|Voltage|Constraint|
P1|KPR||I/O/GCK2|||1|||||||
P2|KPR||I/O|||1|||||||
P3|KPR||I/O|||1|||||||
P4|GND||GND||||||||||
P5|KPR||I/O|||1|||||||
P6|KPR||I/O|||1|||||||
P7||VCCIO-1.8|VCCIO|||1|||||||
P8|KPR||I/O|||1|||||||
P9|TDI||TDI||||||||||
P10|TMS||TMS||||||||||
P11|TCK||TCK||||||||||
P12|KPR||I/O|||1|||||||
P13|KPR||I/O|||1|||||||
P14|KPR||I/O|||1|||||||
P15||VCC|VCC||||||||||
P16|KPR||I/O|||1|||||||
P17|GND||GND||||||||||
P18|KPR||I|||2|||||||
P19|KPR||I/O|||2|||||||
P20|KPR||I/O|||2|||||||
P21|KPR||I/O|||2|||||||
P22|KPR||I/O|||2|||||||
P23|KPR||I/O|||2|||||||
P24|TDO||TDO||||||||||
P25|GND||GND||||||||||
P26||VCCIO-1.8|VCCIO|||2|||||||
P27|KPR||I/O|||2|||||||
P28|KPR||I/O|||2|||||||
P29|KPR||I/O|||2|||||||
P30|KPR||I/O/GSR|||2|||||||
P31|KPR||I/O/GTS2|||2|||||||
P32|KPR||I/O/GTS3|||2|||||||
P33|Date_out<0>|O|I/O/GTS0|OUTPUT|LVCMOS18|2||FAST||||
P34|Date_out<2>|O|I/O/GTS1|OUTPUT|LVCMOS18|2||FAST||||
P35||VCCAUX|VAUX||||||||||
P36|Date_out<3>|O|I/O|OUTPUT|LVCMOS18|2||FAST||||
P37|Date_out<1>|O|I/O|OUTPUT|LVCMOS18|2||FAST||||
P38|En|I|I/O|INPUT|LVCMOS18|2||FAST||||
P39|KPR||I/O|||1|||||||
P40|KPR||I/O|||1|||||||
P41|KPR||I/O|||1|||||||
P42|KPR||I/O|||1|||||||
P43|clock|GCK|I/O/GCK0||LVCMOS18|1||FAST||||
P44|KPR||I/O/GCK1|||1|||||||

To preserve the pinout above for future design iterations in
Project Navigator simply execute the (Lock Pins) process
located under the (Implement Design) process in a toolbox named
(Optional Implementation Tools) or invoke PIN2UCF from the
command line. The location constraints will be written into your
specified UCF file