counter.fit

基于FPGA的分频器设计,已经通过了仿真(VHDL语言编写)

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 10/21/2006 23:00:48      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "counter"
BEGIN

    DEVICE = "EP1K10TC100-1";

    "clk"                          : INPUT_PIN  = 39     ;
    "clr"                          : INPUT_PIN  = 38     ;
    "key"                          : INPUT_PIN  = 90     ;
    "led0"                         : OUTPUT_PIN = 6      ;
    "led1"                         : OUTPUT_PIN = 5      ;
    "led2"                         : OUTPUT_PIN = 70     ;
    "led3"                         : OUTPUT_PIN = 34     ;
    "led4"                         : OUTPUT_PIN = 93     ;
    "led5"                         : OUTPUT_PIN = 69     ;
    "led6"                         : OUTPUT_PIN = 8      ;
    "output0"                      : OUTPUT_PIN = 68     ;
    "output1"                      : OUTPUT_PIN = 9      ;
    "output2"                      : OUTPUT_PIN = 7      ;
    "output3"                      : OUTPUT_PIN = 10     ;
    "|LPM_ADD_SUB:83|addcore:adder|:55" : LOCATION   = LC2_A19;
    "|LPM_ADD_SUB:214|addcore:adder|:55" : LOCATION   = LC4_A24;
    ":15"                          : LOCATION   = LC5_A19;  -- n3
    ":16"                          : LOCATION   = LC6_A19;  -- n2
    ":17"                          : LOCATION   = LC3_A19;  -- n1
    ":18"                          : LOCATION   = LC4_A19;  -- n0
    ":19"                          : LOCATION   = LC8_A14;  -- bcd1n3
    ":20"                          : LOCATION   = LC2_A24;  -- bcd1n2
    ":21"                          : LOCATION   = LC7_A14;  -- bcd1n1
    ":22"                          : LOCATION   = LC6_A24;  -- bcd1n0
    ":58"                          : LOCATION   = LC1_A19;
    ":189"                         : LOCATION   = LC6_A14;
    ":854"                         : LOCATION   = LC2_A14;
    ":883"                         : LOCATION   = LC5_A14;
    ":929"                         : LOCATION   = LC5_A24;
    ":977"                         : LOCATION   = LC3_A14;
    ":1025"                        : LOCATION   = LC4_A14;
    ":1121"                        : LOCATION   = LC1_A24;
    ":1169"                        : LOCATION   = LC1_A14;

END;

INTERNAL_INFO "counter"
BEGIN
	DEVICE = EP1K10TC100-1;
    OD5P39  : LORAX = "1:FB5->LC5_A19,->LC6_A19,->LC3_A19,->LC4_A19|";
    OD2P38  : LORAX = "1:FB2->LC8_A14,->LC2_A24,->LC7_A14,->LC6_A24|";
    OD4P90  : LORAX = "1:FB4->LC8_A14,->LC2_A24,->LC7_A14,->LC6_A24|";
    LC4_A24 : LORAX = "1:MSW0R0C22,G46R0,PA4R0C13->LC8_A14,->LC6_A14|";
    LC8_A14 : LORAX = "1:MSW7R0C13,G58R0->OH7R0P10|2:PA2R0C23->LC5_A24,->LC1_A24||";
    LC2_A24 : LORAX = "1:MSW2R0C22,HHR0R0->OH2R0P7|2:PA1R0C13->LC8_A14,->LC6_A14,->LC2_A14,->LC5_A14,->LC3_A14,->LC4_A14,->LC1_A14||";
    LC7_A14 : LORAX = "1:MSW6R0C13,G53R0->OH6R0P9|2:PA7R0C23->LC4_A24,->LC5_A24,->LC1_A24||";
    LC6_A24 : LORAX = "1:MSW6R0C22,G82R0->OH14R0P68,2:PA3R0C13->LC7_A14,->LC2_A14,->LC5_A14,->LC3_A14,->LC4_A14,->LC1_A14||";
    LC1_A19 : LORAX = "1:MSW0R0C19,HHR23R0|2:PA11R0C13->LC8_A14,->LC7_A14|,2:PA1R0C23->LC2_A24,->LC6_A24||";
    LC2_A14 : LORAX = "1:MSW2R0C12,G17R0->OH10R0P70|";
    LC5_A14 : LORAX = "1:MSW4R0C13,HHR36R0->OH4R0P8|";
    LC5_A24 : LORAX = "1:MSW4R0C23,G66R0->OH12R0P69|";
    LC3_A14 : LORAX = "1:MSW3R0C12,V9C12->OV1C12P93|";
    LC4_A14 : LORAX = "1:MSW3R0C13,V9C13->OV2C13P34|";
    LC1_A24 : LORAX = "1:MSW0R0C23,HHR20R0->OH0R0P5|";
    LC1_A14 : LORAX = "1:MSW1R0C12,HHR8R0->OH1R0P6|";
	LC2_A19 : LORAX2 = "X, X, LC4_A19, LC3_A19";
	LC4_A24 : LORAX2 = "X, X, LC6_A24, LC7_A14";
	LC5_A19 : LORAX2 = "LC5_A19, LC6_A19, LC1_A19, LC2_A19";
	LC6_A19 : LORAX2 = "X, LC6_A19, LC1_A19, LC2_A19";
	LC3_A19 : LORAX2 = "X, LC4_A19, LC3_A19, LC1_A19";
	LC4_A19 : LORAX2 = "X, X, X, LC4_A19";
	LC8_A14 : LORAX2 = "LC1_A19, LC4_A24, LC8_A14, LC2_A24";
	LC2_A24 : LORAX2 = "X, LC1_A19, LC4_A24, LC2_A24";
	LC7_A14 : LORAX2 = "LC1_A19, LC6_A14, LC7_A14, LC6_A24";
	LC6_A24 : LORAX2 = "X, X, LC1_A19, LC6_A24";
	LC1_A19 : LORAX2 = "X, LC5_A19, LC6_A19, LC2_A19";
	LC6_A14 : LORAX2 = "X, LC4_A24, LC8_A14, LC2_A24";
	LC2_A14 : LORAX2 = "LC7_A14, LC6_A24, LC8_A14, LC2_A24";
	LC5_A14 : LORAX2 = "LC7_A14, LC6_A24, LC8_A14, LC2_A24";
	LC5_A24 : LORAX2 = "LC8_A14, LC6_A24, LC2_A24, LC7_A14";
	LC3_A14 : LORAX2 = "LC8_A14, LC6_A24, LC2_A24, LC7_A14";
	LC4_A14 : LORAX2 = "LC8_A14, LC6_A24, LC2_A24, LC7_A14";
	LC1_A24 : LORAX2 = "LC8_A14, LC6_A24, LC2_A24, LC7_A14";
	LC1_A14 : LORAX2 = "LC7_A14, LC6_A24, LC8_A14, LC2_A24";
END;