tb_adderregister.vhw

Self timed pipelined adder

--------------------------------------------------------------------------------
-- Copyright (c) 1995-2003 Xilinx, Inc.
-- All Right Reserved.
--------------------------------------------------------------------------------
--   ____  ____ 
--  /   /\/   / 
-- /___/  \  /    Vendor: Xilinx 
-- \   \   \/     Version : 8.1i
--  \   \         Application : ISE
--  /   /         Filename : TB_ADDERREGISTER.vhw
-- /___/   /\     Timestamp : Fri May 19 17:31:44 2006
-- \   \  /  \ 
--  \___\/\___\ 
--
--Command: 
--Design Name: TB_ADDERREGISTER
--Device: Xilinx
--

library IEEE;
use IEEE.STD_LOGIC_1164.ALL;
use IEEE.STD_LOGIC_ARITH.ALL;
use IEEE.STD_LOGIC_UNSIGNED.ALL;
USE IEEE.STD_LOGIC_TEXTIO.ALL;
USE STD.TEXTIO.ALL;

ENTITY TB_ADDERREGISTER IS
END TB_ADDERREGISTER;

ARCHITECTURE testbench_arch OF TB_ADDERREGISTER IS
    FILE RESULTS: TEXT OPEN WRITE_MODE IS "results.txt";

    COMPONENT EnableAndStart
        PORT (
            InputA : In std_logic_vector (1 DownTo 0);
            InputB : In std_logic_vector (1 DownTo 0);
            Out_put : Out std_logic;
            Carry_Out : Out std_logic;
            Enable : In std_logic;
            St : In std_logic;
            Reset : In std_logic;
            Done : Out std_logic
        );
    END COMPONENT;

    SIGNAL InputA : std_logic_vector (1 DownTo 0) := "00";
    SIGNAL InputB : std_logic_vector (1 DownTo 0) := "00";
    SIGNAL Out_put : std_logic := 'U';
    SIGNAL Carry_Out : std_logic := 'U';
    SIGNAL Enable : std_logic := '0';
    SIGNAL St : std_logic := '0';
    SIGNAL Reset : std_logic := '1';
    SIGNAL Done : std_logic := 'U';

    SHARED VARIABLE TX_ERROR : INTEGER := 0;
    SHARED VARIABLE TX_OUT : LINE;

    BEGIN
        UUT : EnableAndStart
        PORT MAP (
            InputA => InputA,
            InputB => InputB,
            Out_put => Out_put,
            Carry_Out => Carry_Out,
            Enable => Enable,
            St => St,
            Reset => Reset,
            Done => Done
        );

        PROCESS
            PROCEDURE CHECK_Carry_Out(
                next_Carry_Out : std_logic;
                TX_TIME : INTEGER
            ) IS
                VARIABLE TX_STR : String(1 to 4096);
                VARIABLE TX_LOC : LINE;
                BEGIN
                IF (Carry_Out /= next_Carry_Out) THEN
                    STD.TEXTIO.write(TX_LOC, string'("Error at time="));
                    STD.TEXTIO.write(TX_LOC, TX_TIME);
                    STD.TEXTIO.write(TX_LOC, string'("ns Carry_Out="));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, Carry_Out);
                    STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_Carry_Out);
                    STD.TEXTIO.write(TX_LOC, string'(" "));
                    TX_STR(TX_LOC.all'range) := TX_LOC.all;
                    STD.TEXTIO.writeline(RESULTS, TX_LOC);
                    STD.TEXTIO.Deallocate(TX_LOC);
                    ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
                    TX_ERROR := TX_ERROR + 1;
                END IF;
            END;
            PROCEDURE CHECK_Done(
                next_Done : std_logic;
                TX_TIME : INTEGER
            ) IS
                VARIABLE TX_STR : String(1 to 4096);
                VARIABLE TX_LOC : LINE;
                BEGIN
                IF (Done /= next_Done) THEN
                    STD.TEXTIO.write(TX_LOC, string'("Error at time="));
                    STD.TEXTIO.write(TX_LOC, TX_TIME);
                    STD.TEXTIO.write(TX_LOC, string'("ns Done="));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, Done);
                    STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_Done);
                    STD.TEXTIO.write(TX_LOC, string'(" "));
                    TX_STR(TX_LOC.all'range) := TX_LOC.all;
                    STD.TEXTIO.writeline(RESULTS, TX_LOC);
                    STD.TEXTIO.Deallocate(TX_LOC);
                    ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
                    TX_ERROR := TX_ERROR + 1;
                END IF;
            END;
            PROCEDURE CHECK_Out_put(
                next_Out_put : std_logic;
                TX_TIME : INTEGER
            ) IS
                VARIABLE TX_STR : String(1 to 4096);
                VARIABLE TX_LOC : LINE;
                BEGIN
                IF (Out_put /= next_Out_put) THEN
                    STD.TEXTIO.write(TX_LOC, string'("Error at time="));
                    STD.TEXTIO.write(TX_LOC, TX_TIME);
                    STD.TEXTIO.write(TX_LOC, string'("ns Out_put="));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, Out_put);
                    STD.TEXTIO.write(TX_LOC, string'(", Expected = "));
                    IEEE.STD_LOGIC_TEXTIO.write(TX_LOC, next_Out_put);
                    STD.TEXTIO.write(TX_LOC, string'(" "));
                    TX_STR(TX_LOC.all'range) := TX_LOC.all;
                    STD.TEXTIO.writeline(RESULTS, TX_LOC);
                    STD.TEXTIO.Deallocate(TX_LOC);
                    ASSERT (FALSE) REPORT TX_STR SEVERITY ERROR;
                    TX_ERROR := TX_ERROR + 1;
                END IF;
            END;
            BEGIN
                -- -------------  Current Time:  50ns
                WAIT FOR 50 ns;
                CHECK_Carry_Out('0', 50);
                CHECK_Done('0', 50);
                CHECK_Out_put('0', 50);
                -- -------------------------------------
                -- -------------  Current Time:  100ns
                WAIT FOR 50 ns;
                Enable <= '1';
                Reset <= '0';
                -- -------------------------------------
                -- -------------  Current Time:  200ns
                WAIT FOR 100 ns;
                Enable <= '0';
                St <= '1';
                -- -------------------------------------
                -- -------------  Current Time:  250ns
                WAIT FOR 50 ns;
                CHECK_Done('1', 250);
                -- -------------------------------------
                -- -------------  Current Time:  300ns
                WAIT FOR 50 ns;
                St <= '0';
                -- -------------------------------------
                -- -------------  Current Time:  400ns
                WAIT FOR 100 ns;
                Enable <= '1';
                InputA <= "01";
                -- -------------------------------------
                -- -------------  Current Time:  500ns
                WAIT FOR 100 ns;
                Enable <= '0';
                -- -------------------------------------
                -- -------------  Current Time:  600ns
                WAIT FOR 100 ns;
                St <= '1';
                -- -------------------------------------
                -- -------------  Current Time:  650ns
                WAIT FOR 50 ns;
                CHECK_Out_put('1', 650);
                -- -------------------------------------
                -- -------------  Current Time:  700ns
                WAIT FOR 50 ns;
                St <= '0';
                WAIT FOR 300 ns;

                IF (TX_ERROR = 0) THEN
                    STD.TEXTIO.write(TX_OUT, string'("No errors or warnings"));
                    STD.TEXTIO.writeline(RESULTS, TX_OUT);
                    ASSERT (FALSE) REPORT
                      "Simulation successful (not a failure).  No problems detected."
                      SEVERITY FAILURE;
                ELSE
                    STD.TEXTIO.write(TX_OUT, TX_ERROR);
                    STD.TEXTIO.write(TX_OUT,
                        string'(" errors found in simulation"));
                    STD.TEXTIO.writeline(RESULTS, TX_OUT);
                    ASSERT (FALSE) REPORT "Errors found during simulation"
                         SEVERITY FAILURE;
                END IF;
            END PROCESS;

    END testbench_arch;