📄 zongxianshi.fit
字号:
-- MAX+plus II Compiler Fit File
-- Version 10.12 09/21/2001
-- Compiled: 05/15/2007 20:25:14
-- Copyright (C) 1988-2001 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera. Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner. Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors. No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.
CHIP "zongxianshi"
BEGIN
DEVICE = "EPF10K20TC144-3";
"CLK" : INPUT_PIN = 125 ;
"CP" : INPUT_PIN = 55 ;
"LD" : INPUT_PIN = 124 ;
"SCANCLK" : INPUT_PIN = 54 ;
"START" : INPUT_PIN = 56 ;
"getdata0" : OUTPUT_PIN = 28 ;
"getdata1" : OUTPUT_PIN = 87 ;
"getdata2" : OUTPUT_PIN = 117 ;
"getdata3" : OUTPUT_PIN = 136 ;
"getdata4" : OUTPUT_PIN = 27 ;
"getdata5" : OUTPUT_PIN = 82 ;
"getdata6" : OUTPUT_PIN = 14 ;
"getdata7" : OUTPUT_PIN = 30 ;
"jishudata0" : OUTPUT_PIN = 137 ;
"jishudata1" : OUTPUT_PIN = 38 ;
"jishudata2" : OUTPUT_PIN = 7 ;
"jishudata3" : OUTPUT_PIN = 138 ;
"jishudata4" : OUTPUT_PIN = 47 ;
"jishudata5" : OUTPUT_PIN = 48 ;
"jishudata6" : OUTPUT_PIN = 19 ;
"jishudata7" : OUTPUT_PIN = 33 ;
"pause" : OUTPUT_PIN = 22 ;
"rev" : OUTPUT_PIN = 23 ;
"run" : OUTPUT_PIN = 21 ;
"segout0" : OUTPUT_PIN = 13 ;
"segout1" : OUTPUT_PIN = 92 ;
"segout2" : OUTPUT_PIN = 89 ;
"segout3" : OUTPUT_PIN = 91 ;
"segout4" : OUTPUT_PIN = 12 ;
"segout5" : OUTPUT_PIN = 90 ;
"segout6" : OUTPUT_PIN = 11 ;
"selout0" : OUTPUT_PIN = 122 ;
"selout1" : OUTPUT_PIN = 26 ;
"selout2" : OUTPUT_PIN = 31 ;
"selout3" : OUTPUT_PIN = 32 ;
"tJ" : OUTPUT_PIN = 17 ;
"|couter:u1|LPM_ADD_SUB:225|addcore:adder|pcarry1" : LOCATION = LC5_D7 ;
"|couter:u1|LPM_ADD_SUB:225|addcore:adder|pcarry3" : LOCATION = LC1_D7 ;
"|couter:u1|LPM_ADD_SUB:225|addcore:adder|pcarry4" : LOCATION = LC4_E2 ;
"|couter:u1|LPM_ADD_SUB:225|addcore:adder|pcarry6" : LOCATION = LC1_E11;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:75" : LOCATION = LC6_D11;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:79" : LOCATION = LC1_D11;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:83" : LOCATION = LC8_D11;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:87" : LOCATION = LC6_D2 ;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:91" : LOCATION = LC1_D2 ;
"|couter:u1|LPM_ADD_SUB:368|addcore:adder|:95" : LOCATION = LC4_D2 ;
"|couter:u1|:19" : LOCATION = LC1_D24;
"|couter:u1|:21" : LOCATION = LC5_E11; -- |couter:u1|linshi17
"|couter:u1|:22" : LOCATION = LC1_E2 ; -- |couter:u1|linshi16
"|couter:u1|:23" : LOCATION = LC2_A4 ; -- |couter:u1|linshi15
"|couter:u1|:24" : LOCATION = LC7_F7 ; -- |couter:u1|linshi14
"|couter:u1|:25" : LOCATION = LC4_D7 ; -- |couter:u1|linshi13
"|couter:u1|:26" : LOCATION = LC2_D7 ; -- |couter:u1|linshi12
"|couter:u1|:27" : LOCATION = LC3_D7 ; -- |couter:u1|linshi11
"|couter:u1|:28" : LOCATION = LC1_E7 ; -- |couter:u1|linshi10
"|couter:u1|:29" : LOCATION = LC5_D2 ; -- |couter:u1|linshi27
"|couter:u1|:30" : LOCATION = LC3_D2 ; -- |couter:u1|linshi26
"|couter:u1|:31" : LOCATION = LC7_D2 ; -- |couter:u1|linshi25
"|couter:u1|:32" : LOCATION = LC2_D11; -- |couter:u1|linshi24
"|couter:u1|:33" : LOCATION = LC3_D11; -- |couter:u1|linshi23
"|couter:u1|:34" : LOCATION = LC7_D11; -- |couter:u1|linshi22
"|couter:u1|:35" : LOCATION = LC5_D11; -- |couter:u1|linshi21
"|couter:u1|:36" : LOCATION = LC4_D11; -- |couter:u1|linshi20
"|couter:u1|:122" : LOCATION = LC8_E11;
"|couter:u1|:175" : LOCATION = LC2_D2 ;
"|couter:u1|~175~1" : LOCATION = LC8_D2 ;
"|couter:u1|:321" : LOCATION = LC5_E2 ;
"|couter:u1|:327" : LOCATION = LC7_A4 ;
"|couter:u1|:333" : LOCATION = LC1_F7 ;
"|couter:u1|:339" : LOCATION = LC8_D7 ;
"|couter:u1|:345" : LOCATION = LC7_D7 ;
"|couter:u1|:351" : LOCATION = LC6_D7 ;
"|couter:u1|:460" : LOCATION = LC3_E11;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:75" : LOCATION = LC7_D5 ;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:79" : LOCATION = LC2_D4 ;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:83" : LOCATION = LC1_D4 ;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:87" : LOCATION = LC2_B7 ;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:91" : LOCATION = LC8_A4 ;
"|JISHU:u0|LPM_ADD_SUB:113|addcore:adder|:95" : LOCATION = LC6_A4 ;
"|JISHU:u0|:3" : LOCATION = LC3_A4 ;
"|JISHU:u0|:5" : LOCATION = LC1_A4 ;
"|JISHU:u0|:7" : LOCATION = LC5_A4 ;
"|JISHU:u0|:9" : LOCATION = LC3_A8 ;
"|JISHU:u0|:11" : LOCATION = LC2_A8 ;
"|JISHU:u0|:13" : LOCATION = LC1_A8 ;
"|JISHU:u0|:15" : LOCATION = LC5_A8 ;
"|JISHU:u0|:17" : LOCATION = LC6_A8 ;
"|JISHU:u0|:55" : LOCATION = LC8_A8 ;
"|sevenduan:u4|:72" : LOCATION = LC3_F14; -- |sevenduan:u4|q2
"|sevenduan:u4|:73" : LOCATION = LC6_F14; -- |sevenduan:u4|q1
"|sevenduan:u4|:74" : LOCATION = LC7_F14; -- |sevenduan:u4|q0
"|sevenduan:u4|:108" : LOCATION = LC5_F14;
"|sevenduan:u4|:355" : LOCATION = LC1_F14;
"|sevenduan:u4|:359" : LOCATION = LC4_F14;
"|sevenduan:u4|:363" : LOCATION = LC2_F14;
"|sevenduan:u4|:376" : LOCATION = LC7_F23;
"|sevenduan:u4|:382" : LOCATION = LC4_F23;
"|sevenduan:u4|:388" : LOCATION = LC2_C14;
"|sevenduan:u4|:394" : LOCATION = LC2_C21;
"|sevenduan:u4|:397" : LOCATION = LC3_C21;
"|sevenduan:u4|:400" : LOCATION = LC1_C21;
"|sevenduan:u4|:406" : LOCATION = LC5_E24;
"|sevenduan:u4|:409" : LOCATION = LC6_E24;
"|sevenduan:u4|:412" : LOCATION = LC2_E24;
"|sevenduan:u4|:418" : LOCATION = LC6_E14;
"|sevenduan:u4|:421" : LOCATION = LC7_E14;
"|sevenduan:u4|:424" : LOCATION = LC1_E14;
"|sevenduan:u4|:443" : LOCATION = LC1_C24;
"|sevenduan:u4|:448" : LOCATION = LC8_C24;
"|sevenduan:u4|:453" : LOCATION = LC4_C24;
"|sevenduan:u4|~453~1" : LOCATION = LC5_C24;
"|sevenduan:u4|:473" : LOCATION = LC2_C13;
"|sevenduan:u4|:478" : LOCATION = LC3_C14;
"|sevenduan:u4|:483" : LOCATION = LC4_C13;
"|sevenduan:u4|:488" : LOCATION = LC6_C13;
"|sevenduan:u4|:624" : LOCATION = LC1_C17;
"|sevenduan:u4|~649~1" : LOCATION = LC5_C14;
"|sevenduan:u4|:661" : LOCATION = LC1_C14;
"|sevenduan:u4|:673" : LOCATION = LC6_C24;
"|sevenduan:u4|~694~1" : LOCATION = LC5_C13;
"|sevenduan:u4|:700" : LOCATION = LC8_C13;
"|sevenduan:u4|:720" : LOCATION = LC1_C13;
"|sevenduan:u4|~720~1" : LOCATION = LC3_C13;
"|sevenduan:u4|:724" : LOCATION = LC2_C24;
"|sevenduan:u4|:742" : LOCATION = LC7_C13;
"|sevenduan:u4|:775" : LOCATION = LC5_C17;
"|sevenduan:u4|~817~1" : LOCATION = LC4_C14;
"|sevenduan:u4|:826" : LOCATION = LC8_C17;
"|sevenduan:u4|:856" : LOCATION = LC3_C17;
"|sevenduan:u4|:877" : LOCATION = LC4_C17;
"|sevenduan:u4|~877~1" : LOCATION = LC7_C17;
"|sevenduan:u4|:892" : LOCATION = LC6_C14;
"|sevenduan:u4|~913~1" : LOCATION = LC6_C17;
"|sevenduan:u4|:921" : LOCATION = LC2_C17;
"|sevenduan:u4|~922~1" : LOCATION = LC7_C24;
"|sevenduan:u4|:928" : LOCATION = LC3_C24;
"|sevenduan:u4|~1040~1" : LOCATION = LC5_F5 ;
"|sevenduan:u4|~1049~1" : LOCATION = LC4_E7 ;
"|sevenduan:u4|:1067" : LOCATION = LC4_E21;
"|sevenduan:u4|~1067~1" : LOCATION = LC1_E12;
"|sevenduan:u4|:1076" : LOCATION = LC2_E14;
"|sevenduan:u4|~1076~1" : LOCATION = LC6_F5 ;
"|sevenduan:u4|:1085" : LOCATION = LC3_E14;
"|sevenduan:u4|:1094" : LOCATION = LC5_E16;
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -